About the Dual XDM7610
Tired of squinting at a tiny stereo display screen? Then take a look at the XDM7610 CD/MP3 player from Dual. Press a button, watch the motorized faceplate slide out of the way, and feast your eyes on a wide, bright LCD display that stretches nearly all the way across the stereo's face. Pair that with a set of oversized controls and you've got a car stereo that's as easy to use as it is powerful.
The XDM7610's strong built-in amp ensures great sound from all of your discs, including those you've filled with MP3 and WMA music files. Adjust the sound to your liking with five preset tone curves and a loudness setting.
Three sets of preamp outputs offer plenty of handy connections for your external amps and subs, while Dual's "iplug" feature gives you an input jack for your portable music player that you can mount in a handy spot. If the rotary encoder knob on the slide-down face isn't enough for you, Dual even includes a wireless remote control.
- CD receiver with built-in amplifier (17 watts RMS/55 peak x 4 channels)
- plays CDs, CD-Rs, and CD-RWs, including discs loaded with MP3 and WMA files (some recordable disc types may not be compatible)
- detachable, motorized, slide-down face with LCD display
- five selectable EQ curves ("Pop," "Jazz," "Classic," "Beat," and "Rock")
- rear auxiliary input with iplug connector
- three sets of preamp outputs
- repeat and random play
- station and preset scan/seek tuning
- 18 FM/12 AM presets
- wireless remote
- CD frequency response: 10-20,000 Hz
- CD signal-to-noise ratio: 92 dB
- FM sensitivity: 8.5 dBf
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # XDM7610
What's in the box:
- AM/FM/CD/MP3/WMA receiver with a 10-amp fuse inserted into the chassis
- Hard plastic face case
- Trim ring (installed)
- Wiring harness (has one set of preamp outputs)
- XDMR7610 wireless remote control
- 1 CR2032 lithium battery
- iPlug Interface with attached 39" cable (male left and right RCA audio connectors on one end and a stereo minijack on the other)
- Two 3/8" iPlug mounting screws
- 2 Radio removal tools
- 1 Metal support strap
- 6 ISO-mount screws
- 3/4" Bolt
- 5/8" Bolt with flat and split lock washers attached
- 6 Flat washers
- Star lock washer
- 2 Nuts
- Self-adhesive Dual logo badge
- Installation/Owner's Manual
- Removable front panel note
Dual XDM7610 reviews
Thanks for submitting your review
More details on the Dual XDM7610
Features & specs
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||No|
|RMS Power (CTA-2006)||17 watts|
|RMS Power (Manufacturer)||---|
|Peak Output||55 watts|
|RMS Power Bandwidth||20-20kHz|
|Sub Preamp Outputs||Yes|
|Switchable Rear Preamp Outputs||No|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||2 volts|
|Key Button Color||Blue|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|FM Sensitivity||8.5 dBf|
|Radio Data System||No|
|Music File Playback|
|Second Camera Input Lane Watch||N|
Two-step, Motorized Display: The rotary knob, preset buttons, and other control buttons reside on the outside of the faceplate. This unit also has a DIN-sized display behind the faceplate. When the open button is pressed, the motorized faceplate slides down to reveal the display. From the factory the faceplate is semi-permanently attached but instructions are included for converting it into a removable faceplate.
Auxiliary Input: The Dual XDM7610 is equipped with rear-mounted, stereo RCA auxiliary input jacks on a 5" pigtail. If you aren't using the aux input, it can be turned off in the menu so when you toggle through the sources aux doesn't appear.
iPlug: This unit features the iPlug, a 39" interface cable with male RCA jacks that connects an iPod, or other auxiliary source, to the receiver's rear auxiliary input. The iPlug has a dash-mountable 3.5mm female mini-jack that can be attached using the supplied adhesive or self-tapping screws. The measurements of the iPlug housing are 1.776" width, 0.794" height, and 1.997" depth.
MP3/WMA Playback: This unit can play MP3 and WMA files that have been recorded with constant bit rate (MP3: 8-320 kbps/WMA: 32-192 kbps) or variable bit rate compression on CD-R and CD-RW discs. The disc must be recorded using ISO 9660 level 1 or level 2, Yellow Book MODE 1 or, Yellow Book MODE 2 FORM 1. In addition, this unit is compatible with ID3 Tag version 1.x. Discs should be recorded with a maximum of 256 folders and files and 8 folder levels.
Skip Protection: An internal buffer provides ESP (electronic skip protection) to virtually eliminate skipping. The ESP is for MP3/WMA files only.
MP3/WMA Search Modes: The preset buttons and other buttons on the front panel can be used for entering letters or numbers to assist you in locating specific MP3 or WMA files and folders. The following search functions can be performed by this unit:
- Direct File Select: search for specific file number
- Alphanumeric File/Folder Search: search for file or folder names by entering alphanumeric characters
- File/Folder Navigate: search for all available files within a folder
Preset EQ Curves: You can choose from five preset curves: Pop, Jazz, Classic, Beat, and Rock. Any adjustment to the bass or treble settings automatically cancels the current EQ curve.
Source Audio Memory: Individual bass and treble settings are retained in memory for AM, FM, CD, and AUX modes.
Turn-on Volume: You can preset the unit's volume when it is powered on. Each time the unit is turned on, the volume is reset to the preset level regardless of the volume level when the unit was last turned off.
Display Priority: You can set the unit to a source display or time display priority. When set to source display priority, the radio tuner frequency, CD track/elapsed time, selected MP3/WMA information, or Aux display will be displayed by default. The clock can be accessed temporarily when the Display button is pressed. When the time display priority, the clock is displayed by default, while the source information can be accessed temporarily with the Display button.
12/24 Hour Clock: When the unit's radio tuning interval is set to USA spacing, the clock is displayed in a 12-hour format. If the unit is switched to European frequency spacing, the clock switches to a 24-hour format.
Clock Display Note: Normally, the display illuminates only when the unit is on. You can program it so the clock is displayed when the unit is off. In this case the clock is displayed when the ignition key is turned on. In order to see the clock display the face must be open.