About the Beüler SPA400 Smartphone Mirroring Adapter
Mirror your smartphone
Mirror your smartphone
Looking for a permanent way to mirror your smartphone or tablet onto your vehicle's entertainment system? Beuler's SPA400 video adapter gives you a USB input to convert signal to HDMI or standard RCA outputs (composite video and left and right audio). Now, you can watch videos loaded on your device or streaming services.
Charge while you play
The SPA400 is compatible with both iOS and Android devices, and will charge your smart device via USB.
Note: For a permanent installation, you'll need to wire the SPA400 for power, and a wiring harness is included.
- mirrors screens of iOS and Android devices
- converts video from USB input to HDMI or composite video output
- power wiring harness included
- aux input
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # SPA400
What's in the box:
- Smartphone mirroring module
- 39" Power/AV harness
- 39" HDMI cable
- 39" Stereo minjack cable
Thanks for submitting your review
More details on the Beüler SPA400 Smartphone Mirroring Adapter
Smartphone Mirroring Module: The Beuler SPA400 is a smartphone mirroring module which lets you mirror content from your Apple iOS device with Lightning connector or Android OS device with microUSB connector to the screen of an in-dash car receiver or rear seat entertainment system with either an HDMI or Composite video/stereo RCA input. You'll be able to mirror the display of your compatible Apple iOS or Android device, watch select video content, listen to audio from stored music and music apps, as well as display navigation maps and hear voice prompts from the screen of your in-dash receiver or rear seat entertainment system.
Note: Most in-dash car receivers require that the vehicle's parking brake be engaged before they will display video on the built-in screen.
Smartphone Connectivity via USB: The Beuler SPA400 smartphone mirroring module connects to your compatible Apple iOS or Android device via USB, using a Lightning-to-USB cable or microUSB-to-USB cable (sold separately). An Android device will also require the connection of the included 39" stereo minijack cable from the Android device's headphone jack to the smartphone mirroring module's 3.5mm Mic Input. It is compatible with Apple iOS devices that feature a Lightning connector (not compatible with 30-pin Apple devices) and Android OS devices that feature a microUSB connector (not compatible with miniUSB or USB-C).
- Initial Apple Setup:
- Plug in Apple iOS device and wait for 5 seconds.
- Accept trust message that appears on Apple iOS device's screen.
- Wait 10 seconds for the Apple iOS device to mirror.
- Initial Android Setup:
- Android phone needs to be in Developer Mode - Go into Settings/About Device and keep tapping "Build Number" until Developer mode is enabled (can take up to 7 taps).
- Turn On USB Debugging mode.
- Plug in USB cable and stereo minijack cable for video and audio mirroring.
HDMI & Analog AV Output: The Beuler SPA400 features an HDMI output, along with a composite video output and stereo RCA output. The HDMI output consists of an HDMI jack and an included 39" HDMI cable which plugs into the smartphone mirroring module and the HDMI input of your in-dash receiver or rear seat entertainment system. The analog AV output consists of a male composite video connector and male stereo RCA connectors within the included 39" Power/AV harness that plug into the AV input of your in-dash receiver or rear seat entertainment system.
Power Requirements: The included 39" Power/AV harness features a +12V constant wire (yellow), +12V accessory wire (red), and Ground wire (black) that will need to hardwired inside the vehicle.
6 questions already asked