About the Focal K2 Power 100KRS
K2 Power speakers — engineered for superb sound
K2 Power speakers — engineered for superb sound
At Focal, all that matters is music. Focal's sound gurus engage in intensive listening sessions as they design a new line of speakers, making it their mission to create products that deliver uncanny realism, sweeping dynamics, and breathtaking depth. During the hands-on production process, they test every model meticulously to ensure that they meet Focal's exacting standards.
Focal's "Power Hi-Fi" philosophy
The K2 Power 100KRS 4" component speaker system bears the hallmarks of Focal's "Power Hi-Fi" philosophy. The nimble Aramid and glass-fiber woofers demonstrate the control needed to reproduce delicate classical passages, yet they'll handle the power needed to drive your bass-heavy music with authority. The sturdy zinc-aluminum alloy baskets are non-magnetic so they won't interfere with the speaker's own electronics.
Inverted dome tweeter design
Focal's inverted dome tweeters act like little woofers, dispersing the highs in a wide pattern to create an exceptionally natural soundstage. K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. Three levels of tweeter and two levels of midrange control let you dial in the sound to your car's environment.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
- component speaker system includes two 4" woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
- K2 composite woofer cone (Aramid, foam, and glass fiber)
- butyl rubber surround
- 1-3/4" woven Aramid fiber inverted-dome tweeter
- 2-way external crossover with 3 tweeter and 2 midrange level settings
- 4-ohm impedance
- power range: 6-50 watts RMS (100 watts peak power)
- frequency response: 120-20,000 Hz
- sensitivity: 90 dB @ 2.83 V
- mounting depth: 1-9/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 100KRS
What's in the box:
- Two 4" Woofers
- Two inverted dome tweeters (with attached 23" length of speaker wire)
- 2 Tweeter flush mount cups (installed)
- 2 Tweeter angle mount cups
- Tweeter removal tool
- 2 Crossover networks
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Tweeter flush mount clamps
- 2 Woofer mounting gaskets
- 8 Speed clips
- 2 Machine screws (for flush mounting)
- Four 5/8" Self-tapping screws
- Sixteen 1" Self-tapping screws
- Owner's manual (English/ French)
- Focal window sticker
- Serial number card
Focal K2 Power 100KRS reviews
Thanks for submitting your review
More details on the Focal K2 Power 100KRS
Features & specs
|Tweeter Design||Inverted Dome|
|Woofer Composition||K2 Composite|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||90|
|Frequency Response||120 - 20k Hz|
|Minimum RMS Wattage||6|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||1 5/8|
|Bottom-mount Depth (Inches)||1 13/16|
|Cutout Diameter or Length (inches)||3 11/16|
|Mounting Height (Inches)||0.33|
K2 Cone: The woofer cone is a sandwich composite consisting of a foam core, a structural glass fiber bottom layer, and a Kevlar top layer. This combination of materials results in a rigid, light weight cone with excellent damping characteristics.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped aluminum phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Zamak Basket: The woofer features a cast Zamak basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Neodymium Magnets: The speaker uses a Neodymium magnet, which has the same magnetic flux power as a ceramic magnet 10 times its size, reducing the size and weight of the speaker.
Inverted Dome Tweeter: The tweeter is an inverted Kevlar dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at one of two angles; approximately 15° and approximately 40°.
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Midrange Level: Set the midrange output to High or Flat to match their position in the car. When the mids are installed low in the door, some of the output is absorbed by the upholstery and they benefit from the High output setting.
Crossover Slopes: The crossover uses 2nd order, 12 dB per octave low-pass and high-pass filters. The crossover frequency for both is 3,500 Hz.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.315" wide.
|Flush Mount||Angled Surface Mount|
|Depth||0.96"||0.542" (screw depth)|
Crossover: The crossover dimensions are:
- Width: 4.915"
- Height: 1.335"
- Depth: 3.736"
The Focal K2 Power 100KRS replaces these items
- Polyglass woofer with butyl rubber surround
- aluminum/magnesium inverted dome tweeter
- outboard crossover with 3-level tweeter control
1 question already asked