About the Focal Performance 165AS
Perfect sound. Discreet style. Premium construction. These are the standards that define Focal – and the reasons why listening to Focal speakers is an absolute pleasure. The Access line offers a marriage of performance and affordability, allowing you to experience the best in sound with a guilt-free conscience.
The whole package
Take Focal sound to the next level with this Access Series 165AS component system, which includes two 6-1/2" woofers, two TN43 tweeters, and two external crossovers. The DFS (dual fiberglass structure) woofer cone delivers precise mid-bass and midrange frequencies while offering deep, articulated bass. Coupled with a butyl rubber surround, the cone's all-weather durability ensures performance even in the hottest, most humid environments without distortion or warping.
The aluminum inverted dome shape does a better job of dispersing high frequencies than a traditional raised dome tweeter, creating a very wide soundstage with fine resolution and exciting dynamics. Enhance stereo imaging by installing these tweeters exactly where you need them with included flush-mount hardware.
This system's external crossovers ensure a seamless distribution of frequencies to the woofer and tweeter, for a totally natural sound. A 3-position tweeter level adjustment allows you to customize your high frequencies and get them just the way you like them.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
- two 6-1/2" DBS woofers, two TN43 inverted-dome tweeters, and external crossovers
- non-resonant ABS/fiberglass woofer basket
- wire mesh grilles included
- 6-60 watts RMS power range (120 watts peak)
- frequency response: 60-20,000 Hz
- sensitivity: 91.3 dB
- impedance: 4 ohms
- top-mounting depth: 2-9/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 165AS
What's in the box:
- Two woofers
- Two inverted dome tweeters (each with 18" length of speaker wire attached)
- 2 Flush mount tweeter cups (installed)
- 2 Angled surface mount tweeter cups
- 2 Crossover networks
- 2 Tweeter lock washers
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Woofer mounting gaskets
- 8 Speed clips
- Eight 1" Self-tapping pan head screws
- Four 5/8" Self-tapping flat head screws
- 4 Machine screws (each with a lock washer and flat washer attached)
- 4 Nuts
- Owner's manual (English/ French)
Focal Performance 165AS reviews
Thanks for submitting your review
More details on the Focal Performance 165AS
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||Inverted Dome|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87.25|
|Sensitivity at 2.83 volts||91.3|
|Frequency Response||60 - 20k Hz|
|Minimum RMS Wattage||6|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||2 9/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 9/16|
|Mounting Height (Inches)||0.38|
Cone Material: The Dual Fiberglass Structure Membrane (DFS) is a light, rigid, woven glass fiber woofer cone. The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the higher frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Basket: The woofer features an ABS basket reinforced with 20% fiberglass.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Size Classification Note: Some manufacturers, including Focal, call this size speaker a 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size woofer as a 6-3/4". Please enter your vehicle information to confirm fit.
Inverted Dome Tweeter: The tweeter is an inverted aluminum and dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at approximately 20° or approximately 40°. The top of the angle mount cup and the bottom of the flush mount cup can be combined to create another surface mount (non-angled).
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order, 12 dB per octave low-pass and high-pass filters. The crossover frequency for both is 5,000 Hz.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.3" wide.
|Flush Mount||Surface Mount||20° Surface Mount||40° Surface Mount|
|Depth||0.875"||0.667" (screw depth)||0.675" (screw depth)||0.675" (screw depth)|
- Width: 3.16"
- Height: 1.375"
- Depth: 4.515"
Q Crutchfield asked: Why did you buy this?
7 questions already asked