About the Focal ISU 570
Upgrade with Focal quality
Upgrade with Focal quality
You're ready: to do away with unbearable factory sound and to gain a totally authentic experience listening to music in the car. With Focal's Universal Integration Series speakers installed in your car, a new era has begun — one in which it's easy to enjoy every moment of your drive. Focal provides such a dramatic boost in sound quality by applying much of the same technology in these car speakers that they use in their studio and audiophile-grade home systems.
Superior materials and design
Focal's ISU 570 5"x7" component speaker system employs a polyglass woofer cone to give you a warm, natural sound with enhanced strength for accurate playback with no added resonances. An aluminum/magnesium inverted dome tweeter, backed by an in-line crossover, delivers astonishing detail in the high range and integrates an acoustic horn design for an improved soundstage across your dash. Focal also gives you two mounting options for a smoother installation.
High sensitivity design
Planning to drive these speakers off a head unit? No problem. They're designed to take advantage of every bit of power supplied to give you the best audio quality possible. However, Focal's famous sound soars when powered by an aftermarket amp!
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Grilles are not included; the factory grilles should be suitable for most applications.
- component speaker system includes two 5"x7" woofers and two tweeters
- Polyglass woofer with butyl rubber surround
- processed aluminum inverted dome tweeter
- built-in crossovers
- 4-ohm impedance
- handles up to 70 watts RMS (140 watts peak)
- frequency response: 60-21,000 Hz
- sensitivity: 94 dB
- woofer top-mount depth: 2-3/8"
- grilles are not included; factory grilles are appropriate for most installations
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # FOCAL ISU570
What's in the box:
- Two woofers
- Two inverted dome tweeters (each with 5" length of speaker wire attached)
- 2 Flush mount tweeter housings (with tweeters installed)
- 2 Angled surface mount tweeter housings
- Two 18" Lengths of speaker wire with in-line tweeter crossovers
- Two 7" Lengths of speaker wire with in-line woofer crossovers
- 2 Woofer mounting gaskets
- 8 Speed clips
- Four 1" Flathead screws
- Eight 1" Pan head screws
- User manual (English/ French/ German/ Italian/ Spanish/ Portuguese/ Dutch/ Russian/ Polish/ Arabic)
- Focal window sticker
Focal ISU 570 reviews
Ok sounding speakers, for the price they should sound better. Disappointed in crutchfield. Mounting solution was not viable, just a old school steel bar with holes in that would not line up and hold speaker in. I wound up getting a new bracket 3d printed. In my opinion the manufacturer should spend more time developing install kits that actual fit the models they say the speakers fit it. Then if they don't Crutchfield should. Still trying to determine if the factory crossovers will sound better than the ones that come with the speakers. Will know that soon.
Pros: Liveable sound
Cons: Research into mounting hardware
0 of 0 found this helpful
Crystal clear and extremely better than the factory speakers. The music is more alive with these speakers.
Pros: Everything about these speakers!
0 of 0 found this helpful
Installed for about a week now. Sound is superior over factory speakers. I installed these into a Ford Flex with no issues at all. The integrated crossovers make for an easy installation as well(No bulky/large boxes to hide). I am powering these with a 4 x 100 Skar amp. Once the DSP was set up correctly, they sound sweet.
Pros: Easy install without the bulky/large crossovers.
Cons: Not the cheapest speaker.
0 of 1 found this helpful
These speakers are in my 2016 f250 king ranch and they are stupid clear and loud. They are powered by a focal 4340 4 channel 4x70 amp... focal is big time
3 of 3 found this helpful
INSTALLED THE SPEAKERS ONLY, I WILL GIVE MY REVIEW ONCE I INSTALL THE JBL CLUB 704 AND LC7i
0 of 6 found this helpful
Just installed the focal lsu570 5×7 & tweeters in the front of my 2016 F350 with the Sony system. Mid base is better, but the tweeters are fantastic. I am amazed with the clarity. 100% better than the Sony. Fast shipping & outstanding customer service. ??
18 of 19 found this helpful
More details on the Focal ISU 570
Features & specs
|Tweeter Design||Inverted Dome|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||94|
|Frequency Response||60 - 21k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||70|
|Peak Power Handling (Watts)||140|
|Top-mount Depth (Inches)||2 3/8|
|Bottom-mount Depth (Inches)||2 3/4|
|Cutout Diameter or Length (inches)||0|
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Mounting Applications: Focal describes these woofers as 5x7, but they also fit many 6x8 applications. Please enter your vehicle information to confirm fit.
Woofer Crossovers: The included 7" woofer wires have integrated crossovers. The woofer ends of the wires have female quick-slides that easily connect to the woofer terminals.
Inverted Dome Tweeter: The tweeter is an inverted aluminum and magnesium dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Note: When flush mounted, the tweeters are pressure fit into the opening, with nothing holding them from behind, so the cutout diameter is very important.
Mounting Options: The tweeters include flush mount and angled surface mount housings:
|Flush Mount||Angled Surface Mount|
|Mounting Depth||0.658"||0.875" (screw depth)|
Tweeter Crossovers: The included 18" tweeter wires have integrated crossovers. The tweeter ends of the wires have quick-slide terminals that easily connect to the wires soldered to the tweeters. The input end of each wire has three leads, a negative and two positives. The positive leads are labeled Car and Display, with a lower output level from the Car lead (useful because the placement of the woofer in a typical car installation requires the tweeter output be lowered to maintain a balanced sound).
1 question already asked