Contact us
Close contact box

Boss MCBK600B

All-weather speaker and amplifier system with built-in Bluetooth® (Black)

Item # 104MCBK600

This weatherproof motorcycle/ATV sound system rocks hard but doesn't bust your budget.

Read more from Crutchfield writer, Jon P.

California customers:
Please click here for your Proposition 65 warning.

Ships free

In Stock
$119.99 each

About the Boss MCBK600B

Big Boss sound for your motorcycle or ATV

If you're looking for a weatherproof motorcycle/ATV sound system that rocks hard but doesn't bust your budget, this Boss system might be just the thing. You can use Bluetooth® to stream Spotify and Pandora, or plug an MP3 player into the aux jack and enjoy your digital music library. It'll all sound good through the rugged 3" speakers.

Big Boss sound for your motorcycle or ATV

If you're looking for a weatherproof motorcycle/ATV sound system that rocks hard but doesn't bust your budget, this Boss system might be just the thing. You can use Bluetooth® to stream Spotify and Pandora, or plug an MP3 player into the aux jack and enjoy your digital music library. It'll all sound good through the rugged 3" speakers.

800 watts max

The 800-watt amp will produce plenty of sound, and the in-line controls will allow you to control the volume and other necessary functions. Pair your phone via Bluetooth and you'll be able to stream from your favorite apps or just listen to stored music.

Two 3" speakers

The kit includes two 3" full-range speakers, the amp/controller, and all the hardware you need for installation, including adjustable mounting brackets that can fit 3/4" to 1-1/4" handlebars. 

READ LESS

Product highlights:

  • system includes amplifier and two 3" speakers
  • marine-grade construction stands up to rough weather
  • Bluetooth enabled with auto pairing and reconnect
  • amp's peak power output: 800 watts
  • frequency response: 80-15,000 Hz
  • multi-function wired remote control
  • includes adjustable mounting brackets
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # MCBK600B
KEEP READINGREAD LESS

What's in the box:

  • 2 Speakers (each with a 41" input wire attached)
  • 2-channel amp (with wiring attached)
  • Wired control box
  • 3 Mounting brackets (each has 2 pieces)
  • 3 Offset brackets
  • 1 Control box mounting bracket
  • Four M8x12mm Allen head bolts (5mm head)
  • Three M8x20mm Allen head bolts (5mm head)
  • 3 Flat washers
  • Three M8 Locking nuts
  • Four 3/4" Screws
  • Three 0.125" Mounting bracket spacers
  • Three 0.025" Thick mounting bracket liners
  • 77" Power and ground wire with in-line fuse holder
  • One 10-amp ATO fuse (installed)
  • Aux in power cable adapter
  • Six 5-1/2" Zip ties
  • 1 Crimp-on ring terminal
  • 1 Crimp-on quick slide
  • User manual
  • Warranty information

Customer reviews

Loading reviews...

Boss MCBK600B Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Boss MCBK600B

Product Research

Features

Amplifier Inputs: The amp has two inputs, a male 3.5mm mini-plug on the 58" cable attached to the control box and wireless Bluetooth.

Speaker Mounting: The speakers are designed to mount to a round tube using the adjustable clamps. Spacers are included for use with tubes from 7/8" to 1-3/8" (approximately). The speakers can still swivel almost 360°.

Control Box: The control box is typically mounted to the handlebars using the included bracket. (The mounting bracket for the control box is just like the speaker mounting brackets.) Once paired with a Bluetooth device, the control functions are play/pause, skip to the next track, return to the previous track, volume up, and volume down. Only the volume buttons are active when the source is connected to the 3.5mm input.

Note: Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, or may not support all the control box commands.

Wiring: Each speaker has an attached 41" input wire, terminated with inserts that plug into the Molex plug on the power/ground wire (the end of the wire that connects to the amplifier). A 20" long bundle of wires attached to the amp is terminated with the mate to the power/ground wire Molex. A 72" cable attached to the amp plugs into an 8" cable attached to the control box.

Dimensions:

  • Speakers:
    • Diameter: 3.32"
    • Mounting Height: 4" (above center of the bar to which the speaker is mounted)
    • Depth: 4.3"
  • Amplifier:
    • Width: 4"
    • Height: 1.5"
    • Length: 3.36"
  • Control Box:
    • Width: 3-1/4" (4-1/8" including wiring)
    • Height: 2-3/16"
    • Depth: 7/8" (1" including mounting bracket)

Specifications:

  • Voltage: 9-16 volts DC
  • Max Power: 800 watts
  • THD: <1%
  • Signal to Noise Ratio: >74 dB
  • Channel Separation: >56 dB
  • Frequency Response: 250 Hz - 20 kHz
  • Sensitivity: 150 mV - 1 V

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I read many reviews and compared these with the other speaker systems. These had many positive reviews, look good and not to expensive [ Joseph  Aug 15, 2018 ]
A
reputation of crutchfield [ robert  Jun 06, 2018 ]
A
For my Harley softail 2001. [ Mary  Dec 30, 2017 ]
A
Want to try it out on my sidexside [ Antonio  Jun 02, 2017 ]
A
reviews and confidence in purchasing from Crutchfield in the past. Customer support is very important and you have the best!!! Keep up the good work! [ Jeff  Apr 30, 2017 ]
SHOW MORESHOW LESS

4 questions already asked

Q
What type of power source do I need if I want to install this on a bicycle?
[ Biscuit  Jan 21, 2019 ]
3 answers
A
I put mine on a motorcycle. It needs a 12volt battery to work. But you will definatly have to have some sort of charging system. It killed the motorcycle battery in 1 day. Until I wired in a separate on off switch. Hope this helps.
[ todd  Jan 21, 2019 ]
A
12v
[ Timothy  Jan 21, 2019 ]
A
Well I have mine hooked on an accessory on my motorcycle battery. So means a 12volt power source. I'm not sure how u can provide that for a bicycle
[ Luis Damian  Jan 21, 2019 ]
Q
Are they expandable with an additional unit?
[ Johnathon  Aug 09, 2018 ]
1 answer
A
I'm gonna say I don't think so, cause the wiring is made for the specific connectors and it's own little amp. But I am no pro lol
[ Luis Damian  Aug 13, 2018 ]
Q
Will it work for a '17 ninja 300?
[ Damian  Apr 19, 2017 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Apr 21, 2017 ]  Staff
Q
How hard is it to install ?
[ Peanut  Apr 06, 2017 ]
1 answer
A
not hard just have to find a good place to mount The amp
[ Jennifer  Apr 07, 2017 ]

Loading articles...

TOP