About the JVC Arsenal CS-AR650
JVC's Arsenal speakers bring out the subtle details in your music, yet offer the high power-handling capability that you need in an amplified system. Cast aluminum frames use JVC's own heat transfer technology to keep things running cool even under extreme conditions. The perfectly aligned woofer and tweeter deliver sound from a single point source for unbelievable realism and distinct stereo imaging.
Polymer/glass composite cones
The low-profile Arsenal CS-AR650 6-1/2" 2-way speakers fit into more locations than many other high-performance speakers. JVC combines PMI, a polymer used in aircraft design, with glass fibers to make a strong, light woofer cone that offers strong performance. A butyl rubber surround keeps cone movement smooth when the volume's turned up.
Titanium tweeters edged with silk
Each titanium dome tweeter is edged in silk for brilliant high notes that are never harsh, so you won't get ear fatigue with extended listening. In-line 2-way crossover networks send the proper frequencies to the woofers and tweeters, and provide a smooth transition from midrange to high frequencies for clear vocals and thrilling guitars.
Priced per pair
- 6-1/2" 2-way speakers (pair)
- glass fiber and PMI (polymethacrylimide) woofer with butyl rubber surround
- 1" titanium dome tweeter with silk edges
- in-line 2-way crossover with 2-level tweeter control (0, +3 dB)
- 4-ohm impedance
- 8-60 watts RMS power range (180 watts peak)
- frequency response: 50-30,000 Hz
- sensitivity: 86 dB
- depth: 2-1/8"
- grilles included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # CSAR650
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 In-line crossovers
- Two 5' Lengths of speaker wire
- 4 Wire nuts
- Twelve 1" self-tapping screws
- 12 Speed clips
- Warranty information
- Product registration card
- Template on the box
Thanks for submitting your review
More details on the JVC Arsenal CS-AR650
Features & specs
|Tweeter Design||1" Dome|
|Tweeter Composition||Titanium w/ silk edge|
|Woofer Composition||Glass fiber PMI|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||86|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||35 - 50k Hz|
|Minimum RMS Wattage||8|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||180|
|Top-mount Depth (Inches)||2 1/8|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 7/8|
|Mounting Height (Inches)||0.404|
Construction: The 1" silk-edged Titanium dome tweeter is Ferro-fluid cooled and has a neodymium magnet. The glass fiber PMI cone woofer has a strontium magnet.
Point Source Configuration: The tweeter is recessed into the woofer cone so the sound from both originates at the same point; therefore every listener hears the sound from both drivers at exactly the same time.
Crossovers: The outboard crossovers have jumpers offering two tweeter output options; flat and +3 dB. The attached 12" output wires have quick slides that connect to the gold plated speaker terminals. The woofer and tweeter terminals on the speakers are different sizes, so they can't be connected backwards (the larger quick slides will fit on the smaller terminals, but obviously the smaller quick slides won't fit on the larger terminals). A 5' input wire is attached to each crossover.
- Length: 3-1/4"
- Width: 1-7/8"
- Height: 1-3/16"