About the JVC CS-VS608
Upgrade your factory speakers
Upgrade your factory speakers
Whether you're suffering with a blown speaker or you just want hear a little more detail in your music, JVC's DRVN Series speakers have you covered. The CS-VS608 6-1/2"" component speaker system features a durable woofer cone made from a mixture of Aramid, carbon fiber, and mica. JVC uses a tough cloth/rubber surround to support the woofer cone, so you'll enjoy strong bass.
You'll mount the separate 1" balanced dome PEI tweeter up closer to your ears for better stereo separation and detail, while the included 2-way crossover network directs the right frequencies to the woofer and tweeter for maximum performance. These speakers will give you a solid boost in sound quality, even when powered by your factory radio. Grilles are included.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
- package includes two 6-1/2" woofers, two tweeters, and two crossovers
- carbon mica woofer with cloth and rubber hybrid surround
- 1" PEI balanced dome tweeter
- 2-way crossover network
- power range: 8-60 watts RMS (300 watts peak power)
- frequency response: 45-28,000 Hz
- sensitivity: 87 dB
- depth: 2-1/4"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CS-VS608
What's in the box:
- Two woofers
- Two tweeters (each with 12" Wire attached)
- 2 Crossovers (each with 12" Input wire/ 10" Tweeter output wire/ 14" Woofer output wire attached)
- 2 Angled surface mount tweeter housings
- 2 Flush mount tweeter housings
- 2 Flush mount tweeter brackets
- Eight 1" Self-tapping screws
- 8 Speed clips
- Four M3 x 5mm Machine screws
- Two M3 x 15mm Stud bolts
- Two M3 x 30mm Stud bolts
- Four M3 Nuts
- Two M3 Wing nuts
- 2 Split lock washers
- 2 Small flat washers
- 2 Large flat washers
- Warranty information
- Template and mounting instructions on packaging
JVC CS-VS608 reviews
Thanks for submitting your review
More details on the JVC CS-VS608
Features & specs
|Tweeter Design||Balanced Dome|
|Woofer Composition||Carbon Mica|
|Woofer Surround||Cloth/Rubber Hybrid|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||45 - 28k Hz|
|Minimum RMS Wattage||8|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||300|
|Top-mount Depth (Inches)||2 1/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 7/8|
|Mounting Height (Inches)||0.388|
Woofer: Mica is added to an aramid and carbon fiber composite olefin base, resulting in a rigid, light, and durable cone.
Tweeters: The tweeters are PEI (Poly-Ether-Imide) balanced-domes; PEI is a polymer film that produces a wide soundstage for superior imaging. A semi-dome tweeter has a dome placed inside a cone. Balanced dome tweeters are semi-dome tweeters with equal reproduction area given the cone and dome portions of the tweeter.
Tweeter Mounting Options: The tweeters come with brackets to allow flush mounting or angled surface mounting (approximately 30°):
|Flush Mount||Angled Surface Mount|
|Mounting Depth||0.875"||0.3" (screw depth)|
Crossovers: The 2-way crossovers have input and output wires attached. The woofer has quick slide terminals, but the wire has no terminals attached, so item number 120FQS10PK can be added to provide the needed terminals. The crossovers' dimensions are:
- Length: 4-1/8"
- Width: 1-13/16"
- Height: 7/8"
Woofer Mounting: In addition to fitting standard 6-1/2 and 4-hole 6-1/2 applications, the woofer also has a standard 6-3/4 bolt pattern. However, if mounted in a 6-3/4 location the holes for the smaller pattern create an air leak, which must be sealed using a speaker baffle, or something similar.
2 questions already asked