Touchscreen Display
Onboard Navigation
Built-in Bluetooth
Disc/USB/microSD-card Playback
iPod/BlackBerry Integration
HD+Internet+SiriusXM Radio
Audio Section
AV Connections
Remote Control
Touchscreen Display
6.1" Touchscreen Display: The JVC KW-NT510HDT features a
fixed 6.1" wide, 16:9 touchscreen LCD monitor. The screen has a resolution of
800 (H) x 480 (V) x RGB with 1,152,000 total pixels. The touchscreen LCD serves
as a video monitor, system information display and touchscreen control panel.
Ultras-Fast Start-Up Time: The JVC KW-NT510HDT has an
ultra-fast start up time of approximately 10.3 seconds from Off to the Map screen
or an audio/video source screen.
Hard-Key Controls w/ Variable Button Illumination: In
addition to the head unit's touchscreen monitor, the KW-NT510HDT features a
rotary-dial and push-button controls along the left edge of the screen. The hard-key
controls provide Power, Source, Eject, Volume, Menu, Map, and AV functions. The JVC
KW-NT510HDT allows you to adjust the unit's hard-key button illumination. It offers
7 color presets (Blue, Aqua, Green, Yellow, Pink, Red, and Purple) for the hard-key
button illumination. Additionally, there are two user presets, allowing you to
individually adjust the intensity of Red, Green, and Blue from 0 to 31. There is
also a "Scan" setting which scans through all of the 7 available preset colors
continuously.
Off-Axis Viewing: Use the Off-Axis Viewing feature if the screen is
hard to see due to the installation angle or position.
Quick Menu: The Quick Menu is user-changeable and can be assigned a
set of frequently used features for quicker, easier access. Up to 6 Quick Menu
short-cuts can be assigned. The Quick Menu can be accessed from the head unit's
navigation Map screen.
AV Control Bar: The AV control bar overlays a
small AV source control window on top of the head unit's map screen (at the
bottom right-hand side of the screen). With this "picture-in-picture" type
function, the head unit can now display the navigation and source screens (or
rear-view camera) simultaneously.
Picture Adjustments: You can adjust the contrast, color,
tint, and detail level during video playback. You can also choose from four
aspect modes for the in-dash display:
- Regular: For 4:3 source material, 4:3 and 16:9 pictures
display with black bars on either side (16:9 images are compressed).
- Full: Expands 4:3 pictures horizontally to fill the
entire width of the screen, distorting the picture slightly but retaining
full image height.
- Auto: The correct aspect mode is automatically chosen
based on the incoming signal.
Adjustable Dimmer: When 12 volts is applied to the
illumination lead (orange/white) and the dimmer is set to Auto, the display will
dim automatically when you turn on your vehicle's exterior or interior lights.
The dimmer can also be set to Off (normal brightness at all times), or On (display
is always dimmed). You can also manually adjust the display brightness for Day &
Nighttime driving.
Parking Brake Detection: To prevent the displaying of video
while the vehicle is in motion, the light-green parking brake wire (within
22-pin harness) must be connected to your vehicle's parking brake detection circuit.
While the vehicle is in motion (parking brake off), you can still view many of the
other display and menu functions. When driving at a speed greater than 3 miles-per-hour, some
menu screens are not available.
Security Lock/Indicator: You may program the unit with a 4
digit security code. Once the unit has been programmed with a security code, the
code must be entered to use the unit after it has been turned off. If you enable
the security indicator, it flashes when the unit is turned off as an antitheft
deterrent.
2-DIN Chassis: The JVC KW-NT510HDT
has a 2-DIN chassis (also
known as Double DIN), and will fit in many vehicles with a large dash
opening. The unit can be ISO-mounted using factory brackets, or Euro-mounted
using the supplied mounting sleeve. As always, please consult Crutchfield's
Outfit My Car
to verify fit with your vehicle.
Onboard Navigation
Built-In Navigation (powered by NAVTEQ): The JVC KW-NT510HDT
features a built-in GPS Navigation system with maps of the United States
(including Hawaii and Alaska), Canada, and Puerto Rico; powered by NAVTEQ Maps.
The built-in maps include over 8-million Points of Interest (POIs) such as
hotels, restaurants, gas stations, attractions, parking, airports, ATMs, and
more. All map data is stored on the unit's 8GB SSD (sold state drive). The unit's
3-sensor navigation system
helps to pinpoint your vehicle's current location. Once a destination is set,
the unit provides turn-by-turn voice & visual guidance through your vehicle's
speakers and the unit's display monitor; using NAVTEQ navigation software.
Note: Car navigation maps are frequently updated. While
this database was judged to be as accurate as possible at the time of its
release, a map database can never be 100% accurate. Road information that is
maintained in the map databases, such as turn restrictions or road names may
change over time.
Map Updates: Map updates
via a microSD/SDHC memory card can be purchased at the online
NAVTEQ store.
3-Sensor Navigation w/ Antenna: The JVC KW-NT510HDT is
equipped with a high-sensitivity WAAS capable GPS receiver (SiRFstarIII),
Speed Pulse wire, and Gyro sensor to calculate your vehicle's current location.
The included GPS antenna features a self-adhesive base and an attached 11.5'
cable terminated by a proprietary plug which connects to GPS-ANT input on the
back of the head unit. The GPS antenna is designed to be mounted inside the
vehicle on the dash. The GPS antenna measures 1.3125" (w) x 0.625" (h) x 1.4375"
(d).
On-Screen Map: As you travel, the KW-NT510HDT
guides you to
your destination with voice prompts, arrows on the map, and on-screen
directions. At the bottom of the screen is your current street, while the top of
the screen shows your next street; the upper-left corner indicates the distance
to your next maneuver. Your route is marked with a light-blue line, while your
vehicle is marked by a red arrow (or car) on the screen, and checkered flag
marks your destination. A magnified view of the map is displayed when
approaching your next turn. When you reach an area approximately within 90'
around the destination/via point, the navigation system considers you to have
reached your destination/via point. You can adjust the following map settings.
- 2D/3D Maps: You can changes the perspective of the
map from 2D North-Up (displays the map in 2 dimensions with North at the
top), 2D Heading-Up (displays the map in 2 dimensions with your direction
of travel at the top of the screen), 3D Map (displays the map in 3
dimensions with your direction of travel at the top of screen).
- Map Views: You can zoom in and out of the map screen, as well as
scroll the map screen left/right or up/down. You can also rotate a 3D map
screen 360-degrees.
- Night Map Mode: Night Map Mode dims
the map display when driving at night. You can turn this feature On/Off or set
to Auto so the map display dims when you turn on your vehicle's headlights (the
unit's illumination control lead connect is required for Auto mode).
Note: The AV control bar overlays a
small AV source control window on top of the head unit's map screen (at the
bottom right-hand side of the screen). With this "picture-in-picture" type
function, the head unit can now display the navigation and source screens (or
rear-view camera) simultaneously.
3D Landmarks: The KW-NT510HDT
's navigation map features
three-dimensional buildings to provide you with a better perspective of your
surroundings. With 3D Landmarks, you can see representations of prominent
buildings in many cities.
Voice Guidance (with Text-to Speech): When you approach a
turn, the KW-NT510HDT guides you with voice guidance (Text-to-Speech) through
your vehicle's front speakers and visual indications on the KW-NT510HDT's screen.
The unit offers 3 voice guidance languages including English, Spanish and French;
with adjustable volume (0-20). You can continue to listen to your music source
while navigating. The KW-NT510HDT will mute or attenuate the music source, when
there is a text-to-speech voice prompt. Once the voice prompt has ended, your music
volume will automatically raise to previous setting.
Lane Assist w/ Junction View: The Lane Assist function
guides you to the appropriate lane you should be in for upcoming junctions and
interchanges, while Junction View displays a realistic view of upcoming
road details facilitating a safer navigation experience.
Destination Search: The JVC
KW-NT510HDT offers the following Destination Search functions:
Destination Search | Description |
Browse Map | Select a point on the map for your
destination by touching the screen. |
Home | Register one point as your home
address. |
Address | Search by address using the unit's
on-screen keyboard. |
Favorites | Register 300 of your favorite points
so you can easily navigate to them from anywhere at any time. |
Previous | Search from the history of previous
destinations and via points from the last 50 points. |
8,000,000 POIs |
You can search for POIs
(points-of interest) by category - Gas Station, Parking, Restaurant, Coffee/Deserts,
Finance, Shopping, Service, Entertainment, Recreation,
Hotel/Accommodation, Travel, Medical, Community, Automotive, etc..
You can also enter the specific name of a POI. You can choose to
search for POIs around your current position, your destination, or
your via point(s). |
Phone Number | Search a destination by entering its
telephone number using the unit's on-screen keypad. |
Coordinates | Search by entering the latitude and
longitude. |
Note: Moving at a specific
speed (3+ MPH) engages safety measures in the navigation system to encourage
safe driving. Only instantly accessible points-of-interest and simple menu
systems are accessible, unless the car is stopped. Otherwise, an address
cannot be entered (the keyboard is disabled). The vehicle must be
stopped and the parking brake will need to be engaged to enable these
functions.
NaviBridge (for iPhone or Android):
NaviBridge is a free iPhone/Android application that allows you to remotely
control the JVC navigation head unit by setting a destination from your USB
connected iPhone (iOS 4.3+) or Bluetooth paired Android smartphone (2.2+). Your
supported iPhone can be connected to the head unit via the JVC KS-U49 cable
(sold separately) or the cable the came with your iPhone. Your Android smartphone
must support Bluetooth and be paired with the head unit. You
can set a destination from your iPhone or Android map screen, or select one from
your smartphone's stored Contacts or Bookmarks. The NaviBridge app can be
downloaded from the
iTunes App Store or the
Google Play Store.
Note: When using an Android device, you cannot select Pandora as a
source during NaviBridge mode.
Total Traffic+ HD Network: The KW-NT510HDT
also includes
free lifetime subscription to Clear Channel's Total Traffic+ HD Network, which
provides real-time on-screen traffic updates; as well as News, Sports, and
Weather Information. Total Traffic+ HD Network delivers real-time traffic data
for 100 metropolitan markets in the United States. Total Traffic+ HD Network
provides incident, event, construction, congestion, and impact information
during your travels. Using this real-time traffic data, the JVC KW-NT510HDT
can
automatically calculate a new route when approaching a traffic event; saving you
time and fuel resources, and helping to alleviate roadway stress.
- Traffic List: The Total Traffic+ HD Network provides of
a list of traffic incidents in your local area so you can choose a preferred
route around these areas - even before you start navigating. While
navigation is active, you can even view all traffic incidents ahead on your
desired route.
- Traffic Warnings: The KW-NT510HDT
provides incident
warnings for traffic congestion, road construction, and weather hazards.
Once a traffic incident is selected, detailed information can be viewed
about the exact location and distance from your current position.
- Traffic Alerts: Traffic alerts appear on-screen as you
approach incident locations. You can choose to reroute manually, continue
your current route, or have the KW-NT510HDT
automatically reroute you around
these areas.
- Headline News: Information on National, World, Sports,
and Business news downloads automatically. Full news stories can also be
selected for reading on-screen.
- Sports Scores: You can look up scores from current
national sporting events.
- Weather Info: You can view local and national weather
conditions on screen.
Note: Total Traffic+ HD Network
coverage map.
When you are out of HD radio coverage, the
Hybrid Total Traffic Network+ Mode receives news and real-time traffic
information from the iHeartRadio Link app on your USB connected iPhone.
NewsService Journaline: NewsService Journaline delivers
hierarchically structured textual information, enabling you to easily and
immediately access traffic information you are most interested in from the JVC
in-dash navigation receiver. You can browse all received traffic information,
both program-related and program-independent textual information, and select
your favorite traffic news items.
Routing Preferences: You can select how the unit will
calculate your route by adjusting Route Priority and Route Avoidance. You can select
the unit to either calculate the fastest timed route or shortest distant
route.
You can select to use or avoid the following types of roads; Freeway, Toll
Road, or Ferry.
Via Points: After selecting your
destination, you can select up to four places (via points) to stop by along your
route.
Adjusting Vehicle Position: If you find your current position is displayed incorrectly on the map, you can adjust your vehicle's position/location.
Speed Alert: The system sounds an
alarm when you surpass the speed limit of the current road by a set value. You
can choose for the unit to alert you when you are 3, 6, 10, 15, or 20 miles over
the speed limit.
Auto Reroute: If you depart from the original route, the navigation
system recalculates the route and provides new directions.
Simulate: You can simulate a desired route to
confirm what your trip will look like.
Built-in Bluetooth
Bluetooth Technology: The JVC KW-NT510HDT features built-in
2.4GHz Bluetooth technology (version 2.1+EDR). The KW-NT510HDT's built-in Bluetooth
technology promotes safe driving habits by allowing you to have a hands-free
conversation while driving, without the need to hold a phone to your ear. Your
Bluetooth enabled phone can be kept in your purse, pocket, or glovebox; while
you communicate through the JVC navigation receiver. The head unit also support
Bluetooth audio streaming from your Bluetooth enabled smartphone or digital
audio player.
Bluetooth Profiles: In order to use Bluetooth wireless
technology, your phone must also be Bluetooth compatible and be able to
interpret certain profiles. This unit is compatible with the following Bluetooth
Profiles:
- Hands-Free Communication: HFP (Hands Free Profile), OPP
(Object Push Profile), PBAB (Phone Book Access Profile).
- Audio Streaming: A2DP (Advanced Audio Distribution
Profile), AVRCP (Audio/Video Remote Control Profile).
Note: Due to the differences in Bluetooth technology, some
Bluetooth enabled devices may be incompatible, function improperly, or may
not support all features when used with the JVC head unit. See
JVC's Bluetooth compatibility chart for a complete list of compatible
Bluetooth enabled devices.
SPP (Secure Simple Pairing): With Secure Simple Pairing
(SSP), you can easily pair a Bluetooth enabled phone to the JVC KW-NT510HDT
without
having to enter pin codes or go through complicated settings. When a registered
Bluetooth device is in close proximity to the receiver, the auto connection
function automatically pairs the two units. You can register up to five
Bluetooth-enabled devices with the JVC head unit (only one paired phone can be
used at a time).
Bluetooth Hands-Free Communication: The head unit supports
Bluetooth hands-free communication for your Bluetooth enabled mobile phone. The
touchscreen controls of the KW-NT510HDT can be used to dial a number, answer an
in-coming call, or end a call. The unit also features an external microphone
(featuring adjustable gain), so you can carry on your side of the conversation
while listening to the caller through your vehicles speakers (front or all).
During a conversation, you can switch between the Private Mode (talking directly
on your cell phone) and the Hands Free Mode.
External Microphone: The JVC KW-NT510HDT
includes an external
microphone to carry on your side of a phone conversation. The external wired microphone offers improved audio quality versus an
integrated microphone, so you can be heard easier over noisy traffic and road
noise. You can adjust the volume level and noise cancellation of the microphone
without affecting the other sources. The external microphone features an
attached 10' cable terminated by a right-angle 3.5mm connector which plugs into
the mic input on the rear-panel of the head unit. The microphone offers an
integrated mounting bracket which can be clipped to your vehicle's sun-visor or
taped to your dash. The external microphone measures 0.525" (diameter) x 1.505"
(depth).
Note: This unit does not offer an integrated
front-panel microphone.
Wireless Audio Streaming (w/ Metadata Display): The JVC
KW-NT510HDT
also supports wireless audio playback (AD2P) and control (AVRCP) of a
Bluetooth enabled audio player or smartphone. The KW-NT510HDT
will be able to
control basic playback functions of your Bluetooth device's stored music; such
as Play/Pause, Skip Next/Previous, Fast Forward/Rewind and Random/Repeat. The
head unit will also display your stored music's song information; such as Artist
name and Song/Album title. The KW-NT510HDT
also supports audio streaming of music
apps downloaded on your smartphone with metadata display and limited control.
Advanced music control of your music apps will still need be done via your
Bluetooth-enabled smartphone. When an incoming call or outgoing call is in
progress from your Bluetooth enabled mobile phone, audio streaming will be
paused so you can take your call. Once the call is finished, your streaming
music will resume.
Disc/USB/microSD-Card Playback
Multimedia Playback: The JVC KW-NT510HDT
offers a front-loading
disc slot, rear-panel USB port, and front-panel microSD-card slot.
- Compatible Discs: The unit has a front-loading
disc-slot to make loading your disc easier because there is no panel to
slide or fold-down. The KW-NT510HDT
supports playback of DVD-Video, DVD-R/RW,
DVD+R/RW, CD-Audio, CD-Text, CD-R/RW discs.
- USB Port: The JVC KW-NT510HDT
features a rear-panel USB
type-A port (attached to the unit's rear-chassis by a 38" cable) for
connection and control of a portable USB mass-storage class (MSC) device;
such as select Android smartphones (Froyo/Gingerbread OS only), portable
digital audio players, or USB thumbdrives. Up to 4 USB devices can be connected to the head unit's USB port
via a single USB hub (sold separately). USB portable audio devices that can
be charged via USB will be charged when plugged into the DVD receiver's USB
port (5V/1A), and the vehicle's ignition switch is set to ACC or On.
- microSD-Card Slot: The JVC KW-NT510HDT
is equipped with a
front-panel microSD-card. The unit supports microSD (up to 2GB) and microSDHC (up to 32GB)
memory cards.
Compatible Media Files: The JVC KW-NT510HDT
supports the
following types of audio, video, and photo files recorded onto a disc or loaded
onto a USB mass storage class device.
Media Type | Disc (CD-R/RW or
DVD-R/RW, DVD+R/RW) | USB (MSC) |
microSD/SDHC (2GB-32GB) |
File System | ISO9660 Level 1/Level 2, Joliet,
Romeo | FAT
12/16/32 |
Playable File Types | Audio | MP3: bit rate of
32-320kbps w/ sampling rates of 16-48kHz WMA: bit rate of 32-320kbps w/ sampling rates of
16-48kHz AAC: bit rate of 32-320kbps w/ sampling rates of 16-48kHz WAV: bit rate of 16-bit w/ sampling rate
of 44.1kHz
| MP3:
bit rate of 32-320kbps w/ sampling rates of 16-48kHz WMA: bit rate of 32-320kbps w/ sampling rates of
16-48kHz AAC: bit rate of 32-320kbps w/ sampling rates of 16-48kHz WAV: bit rate of 16-bit w/ sampling rate
of 44.1kHz FLAC: bit rate of 16-bit w/ sampling rates of 8-48kHz |
Video | DVD-Video, DVD-VR | MPEG4: picture
size of 720x480 (30fps) w/ max bit rate of 8Mbps H.264/AVC: picture size of 720x480 (30fps) w/ max bit rat of
8Mbps WMV: picture size of 720x480 (30fps) w/ max bit rat of 8Mbps |
Maximum # of Folders/Files | 250 folders/5,000 files (999 files
per folder) | 9,999 folders (maximum
of 999 files per folder) |
Tags | MP3
ID3-tags (ver. 1.0/1.1/2.2/2.3/2.4), WMA-tags, AAC-tags, and
WAV-tags |
Playback & Search Functions: The KW-NT510HDT
offers the following
playback & search functions for Disc, USB and microSD playback; Folder/File Search, Play/Pause,
Fast Forward/Reverse, Next/Previous Track, Random (all/disc), and Repeat
(track/chapter/folder).
DVD Touchscreen Control: During DVD playback, you can
control certain operations simply by touching an area of the screen. The
touchscreen has 3 functions areas. You can touch the left of the screen to start
the current chapter over, or the right of the screen to skip to the next
chapter. Pressing the middle of the screen activates the DVD playback on-screen
buttons.
Resume: If you change the source, playback also stops
(without ejecting the disc or USB/microSD memory device). Next time you select CD,
USB, or microSD for the playback source, the unit will start from where it has been stopped previously.
Disc Reload: If the ejected disc is not removed within 15
seconds, the disc is automatically inserted again into the loading slot to
protect it from dust; playback starts automatically.
Mounting: For proper disc playback you must install the unit
within 30-degrees of horizontal.
iPod/BlackBerry Integration
iPod/iPhone Connectivity (w/ DAC bypass): The JVC KW-NT510HDT
supports audio/video playback from select Apple iPods and iPhones. Because the JVC KW-NT510HDT
uses its
USB connection for audio & control transfer, your iPod/iPhone's stored music is
loaded instantly to the head unit and sound quality is maximized through the
head unit's 24-bit D/A converter, allowing for a Signal-to-Noise ratio up to
100dB.
- Audio/Video Playback: The optional JVC KS-U49 iPod
cable (105KSU49,
sold separately) allows you to playback and control audio/video from your
iPod or iPhone on this JVC navigation head unit. You can access audio/video
content stored on your iPod/iPhone device or apps streamed to your Apple
device. The cable features a proprietary Apple iPod 30-pin dock connector on
one end and a male 3.5mm video connector on other end, along with a USB
type-A connector. The cable plugs into the unit's rear-panel "iPod Video"
input and USB port. The unit's USB port handles the audio transfer, control,
metadata display, and charging of your iPod/iPhone. The 3.5mm video input
handles video transfer from your iPod/iPhone to the JVC receiver. Video can
only be displayed while the vehicle's parking brake is engaged.
- Audio Only Playback: If you only want to playback audio
from your iPod or iPhone, you can simply connect it to the KW-NT510HDT
's USB
port using the USB/iPod dock cable that came with your iPod/iPhone. You can
then access music stored on your iPod/iPhone device, as well as music apps
streamed to your Apple device. Up to 4
iPod/iPhone devices can be connected to the head unit's USB port via a
single USB hub (sold separately).
Note: If you have an iPod nano (7th gen), iPod touch
(5th gen), or iPhone 5/5C/5S; use the Lighting-to-USB cable that came with your
Apple device to connect to the head unit. These Apple devices only support
audio playback (no video output).
iPod/iPhone Control: You can choose to control your
connected iPod/iPhone from the JVC head unit, from the iPod/iPhone's clickwheel
or touchscreen, or from select apps streamed to your iPhone.
- Head Unit: From the head unit's front-panel
controls you can search for your iPod/iPhone's stored music by Playlist, Artist, Album,
Song, Podcast, Genre, Composer, and Audiobook. You can search your iPod/iPhone's
stored videos by Playlist,
Movies, Music Videos, TV Shows, Video Podcasts, Rentals, and iTunesU. Once a Playlist or
Category is selected, you can search the list alphabetically (A-Z). The KW-NT510HDT
also supports Repeat
(song) and Random (album/all) playback functions of your iPod/iPhone. In
addition, you can control basic playback functions (Play/Pause,
Previous/Next Song) of music apps streamed to your iPhone (iOS 3.0+). Not
all apps will be compatible.
- iPod/iPhone: You can choose to navigate your iPod or iPhone's
stored music and videos, as well as streamed music apps from its clickwheel
or touchscreen; like you are accustomed to during normal usage. This is very
useful for the person riding in your passenger seat. The head unit's search
& playback controls will be locked in this mode, but you do still get
metadata display on the head unit's touchscreen monitor. Not compatible with
all music apps.
- External Mode: External mode lets you enjoy video
content from your iPhone's downloaded video apps through the JVC KW-NT510HDT
. Using the JVC KSU-49 cable (sold
separately), you can watch video on the JVC navigation receiver's
touchscreen from streaming video apps; such as
Netflix & YouTube downloaded on your iPhone 4/4S (iOS
4.0+). You cannot control these apps from the head unit; you will still need
to use your iPhone to control playback. The vehicle's parking brake must be
engaged to playback video. Not all video apps will be compatible with External mode.
Note: Access
to your iPhone's downloaded application will depend on the availability of a
cellular and/or WiFi network for purposes of allowing your iPhone to connect
to the Internet.
iPod/iPhone Display: The KW-NT510HDT
will display music file
information for your iPod/iPhone's stored music and music apps in Head Unit or iPod
control mode. The head unit will display Track number, Elapsed playing time, Artist
name, Song/Album title, and Album Art. Pandora and iHeartRadio song/artist
information will also be displayed. External
(App) mode does not display metadata
on the unit's LCD monitor (the head unit will simply display
"External Mode").
iPod Charging: The head unit's USB connection provides 1A of
current to power and charge your connected iPod/iPhone when your vehicle's
ignition switch is set to the 'ACC' or 'On' position. iPod/iPhone devices
connected to the head unit via a USB hub will not be charged. This unit does not charge
the iPad. If your iPod/iPhone has no initial battery charge,
then the unit will not recognize it.
iPod/iPhone Compatibility Chart: The JVC KW-NT510HDT
is "Made
for iPod/iPhone" compatible and supports the following iPod/iPhone model
features (as of 10/20/2013):
Apple Device | Generation | Tested Version | Media Type | Control Type | Apps | Bluetooth | Display Type | Charge |
Audio | Video | Head Unit | iPod/iPhone | External Mode | NaviBridge | iHeartRadio | Pandora | Phone | Audio | Album Art | Song/Artist Text | Track Info |
iPhone | 2G | 3.1.3 | Y | Y | Y | Y | N | N | N | Y | Y | N | Y | Y | Y | Y |
3G | 4.2.1 | Y | Y | Y | Y | N | N | Y | Y | Y | Y | Y | Y | Y | Y |
3GS | 5.1.1 | Y | Y | Y | Y | N | Y | Y | Y | Y | Y | Y | Y | Y | Y |
4 | 7.0.2 | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y |
4S | 7.0.2 | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y |
5C* | 7.0.2 | Y | N | Y | Y | N | Y | Y | Y | Y | Y | Y | Y | Y | Y |
5S* | 7.0.2 | Y | N | Y | Y | N | Y | Y | Y | Y | Y | Y | Y | Y | Y |
5* | 7.0.2 | Y | N | Y | Y | N | Y | Y | Y | Y | Y | Y | Y | Y | Y |
touch | 1st | 2.2.1 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
2nd | 4.2.1 | Y | Y | Y | Y | N | N | N | N | N | Y | Y | Y | Y | Y |
3rd | 5.1.1 | Y | Y | Y | Y | N | N | N | N | N | Y | Y | Y | Y | Y |
4th | 6.1.3 | Y | Y | Y | Y | N | N | N | N | N | Y | Y | Y | Y | Y |
5th* | 7.0.2 | Y | N | Y | Y | N | N | N | N | N | Y | Y | Y | Y | Y |
nano | 1st | 1.3.1 | Y | N | Y | N | N | N | N | N | N | N | Y | Y | Y | Y |
2nd | 1.1.3 | Y | N | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
3rd | 1.1.3 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
4th | 1.0.4 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
5th | 1.0.2 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
6th | 1.2 PC | Y | N | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
7th* | 1.02 PC | Y | N | Y | Y | N | N | N | N | N | Y | Y | Y | Y | Y |
classic | 80GB | 1.1.2 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
120GB | 2.0.1 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
160GB | 2.0.4 | Y | Y | Y | Y | N | N | N | N | N | N | Y | Y | Y | Y |
video | 5th | 1.3 | Y | Y | Y | N | N | N | N | N | N | N | Y | Y | Y | Y |
iPad | 1 | 5.1.1 | Y | Y | Y | Y | Y | Y | Y | Y | N | Y | Y | Y | Y | N |
2 | 7.0.2 | Y | Y | Y | Y | Y | Y | Y | Y | N | Y | Y | Y | Y | N |
3 | 7.0.2 | Y | Y | Y | Y | Y | Y | Y | Y | N | Y | Y | Y | Y | N |
4* | 7.0.2 | Y | N | Y | Y | N | Y | Y | Y | N | Y | Y | Y | Y | Y |
mini* | 7.0.2 | Y | N | Y | Y | N | Y | Y | Y | N | Y | Y | Y | Y | Y |
Note:
- *Requires the Lighting-to-USB cable that came with your Apple device
to connect to the head unit.
- Apple iPod/iPhone software updates may change functionality results.
If you download a newer software version, you may need to reset the head
unit and your iPod/iPhone to regain functionality. If this doesn't work,
you may need to wait until a newer software update is available.
Drive Change Mode (for BlackBerry): The JVC receiver's USB
port supports playback from BlackBerry smartphones (via USB mass storage mode).
JVC's Drive Change Mode lets you connect your BlackBerry smartphone (that uses
an external memory card) directly to the head unit, via USB. Drive Change Mode
will let you switch between your BlackBerry smartphone's internal and external
memory (such as microSD Card), so you can listen to music stored on either
memory. You'll continue to be able control basic playback functions; such as
folder/file search, play/pause, and skip next/previous; regardless of memory
type.
HD+Internet+SiriusXM Radio
HD Radio: With the built-in HD Radio tuner, you can
receive digital AM/FM broadcasts from local stations where available. HD Radio
technology significantly improves audio quality and reception, as well as
includes information such as artist name and song titles or traffic news,
viewable on the receiver's display. HD Radio Technology will deliver
high-quality digital sound. AM digital will have FM-like quality in stereo,
while FM digital will have CD-like quality sound with static free and clear
reception. In addition to HD AM/FM stations, the KW-NT510HDT
can also receive
conventional analog AM/FM broadcasts.
- Digital/Analog Tuning: You can setup the KW-NT510HDT to
search both analog and digital radio stations, only HD Radio stations, or
analog radio stations only. You can store up to 18 FM and 6 AM
digital/analog presets stations as presets (HD Radio multicast channels can
also be preset). Presets can be set manually or automatically, using
Strong-station Sequential Memory (SSM). You can also switch the analog
tuner's IF filter to Wide or Auto to increase/decrease the sensitivity.
-
Channel Guide:
The Channel Guide scans and stores the receivable
HD Radio stations in your area for immediate access from the head unit's
on-screen menu.
- Multicasting: In addition to conventional broadcasts,
with HD Radio broadcasting, it is possible to choose from up to 3 multicast
programs (HD1/HD2/HD3).
-
Bookmark:
You can bookmark the current playing song and later
transfer the song/artist/album info via a QR code to your compatible
smartphone device.
- Artist Experience: AM/FM digital stations can offer
text and data such as artist names and song titles, as well as Album Art and
historical photographs. The built-in HD Radio tuner displays song, artist,
and station information, as well as Album Art on the display of the JVC
KW-NT510HDT.
- iTunes Tagging: It is possible to save the song's
information (tag) from a HD Radio broadcasting station to your USB-direct
connected iPod/iPhone. The songs will show up in a playlist called "Tagged"
in iTunes the next time you sync your iPod/iPhone. Then you can directly buy
the songs you want from the iTunes Music Store. You can "tag" up to
100
songs. Your iPod/iPhone must have at least 64KB of free space to "tag" and
transfer songs. iTunes 7.4 or later is required to purchase "tagged" songs.
-
Instant Info:
News, sports, weather, and other useful information
is available via HD Radio.
-
Active Radio:
Emergency alerts via HD Radio broadcast deliver
relevant alert information such as weather alerts, road hazards, and civil
or community messages.
Note: HD Radio is the system for digital AM and FM
broadcasting in the U.S. More than 2,000 radio stations are broadcasting
their primary signals in digital HD Radio technology, as a free service. Go
to HDRadio.com to
check for HD Radio stations in your area.
Internet Radio Apps: The JVC KW-NT510HDT allows you to
access Pandora and
iHeartRadio online music
services through your USB-connected iPhone or Bluetooth-connected
Android/Blackberry smartphone. Your Apple iPhone must be connected to the
KW-NT510HDT via the JVC KSU-49 cable (sold separately), or the cable supplied
with your iPhone. Your Android or Blackberry smartphone must support A2DP/
AVRCP/SPP Bluetooth profiles and be paired with the JVC KW-NT510HDT. Your
iPhone, Android smartphone, or Blackberry device will need an active Data Plan
account with connection to the Internet via 3G, EDGE, or WiFi.
- Pandora App (for iPhone/Android/Blackberry): The free
Pandora App (either from
iTunes Apps,
Google Play, or
BlackBerry App World) lets you play music from the Pandora music service
through the JVC KW-NT510HDT using your USB-connected Apple iPhone (iOS3+)
or Bluetooth paired Android/Blackberry smartphone. The JVC KW-NT510HDT
provides control over the Pandora music service and displays Artist, Album,
and Song information. You can select Pandora stations from your station list
and sort them by date or alphabetically (A-Z). You can also skip song tracks within a station. You can
even give songs a thumbs up or thumbs down. The song/artist currently being
played can be bookmarked & stored in your Pandora account. An active Pandora account is
required.
- iHeartRadio Link (for iPhone/Android): The free
iHeartRadio Link app for JVC (either from
iTunes
Apps or
Google Play-coming soon) lets you play music from the iHeartRadio music service
through the JVC KW-NT510HDT using your USB-connected Apple iPhone (iOS 4.2+), or Bluetooth paired Android smartphone (2.2+). The iHeartRadio music
service provides access to more than 1,500 live radio stations from
coast-to-coast (including pop, country, urban, rock, talk, and sports). All
stations are streamed in high-quality AAC format. The
KW-NT510HDT will provide control over the iHeartRadio Link app, as well as
display station identification and song/artist information, along with album
art. You can select available stations from the unit's on-screen station
list, which includes - Favorites (up to 100), Featured, Local Stations, All
Cities, National Stations, Genres, and Personalities. You an also have the
head unit randomly select stations for you. iHeartRadio even provides "tag"
information for each song, so you can transfer "tag" information to your
connected iPhone and purchase your "tagged" songs later from the online
iTunes store. An
active iHeartRadio account is required.
Note: Access to these Internet Radio services will depend
on the availability of a cellular and/or WiFi network for purposes of
allowing your iPhone or Android/Blackberry smartphone to connect to the
Internet. Not supported in Canada and only available in the United States.
SiriusXM Ready via Firmware Update: The KW-NT510HDT is
compatible with SiriusXM's SXV200 tuner (220SXV200,
sold separately) through a firmware update from JVC.
Audio Section
24 Bit D/A Converter: The JVC KW-NT510HDT
utilizes a 24-bit
digital to analog converter for superior sound quality.
MOSFET Amplifier: The KW-NT510HDT
is equipped with a MOSFET
amplifier. Compared to conventional power supplies, the MOSFET amplification
circuit is smaller and more efficient, and it delivers increased power with less
distortion and absolutely zero on/off switching noise. More power means louder
and cleaner music at higher volumes because you're not pushing the limits of the
amplification circuit.
CEA2006 Compliant: The power specifications for the KW-NT510HDT
are compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement
standards from the Consumer Electronics Association (CEA). These standards were
developed as a way to equitably compare power specs from model to model and
between manufacturers. The power output specs for the KW-NT510HDT
are as follows:
- CEA2006 Specs: 20 watts RMS x 4 channels (at 4 ohms,
20Hz-20kHz, 1% THD-N)
- Maximum Power Output: 50 watts x 4 channels (200 total
watts)
Amplifier Gain Control:
When you are using the KW-NT510HDT
with factory speakers (or those rated to less
than 50 watts peak), the Amplifier Gain Control can limit the amount of power
being sent to those speakers. When the Amp Gain Control is set to low, the
volume control ranges from 0 (minimum) to 30 (maximum). When using speakers
rated higher than 50 watts peak, you can set the Amp Gain Control to high, and
the volume control will range from 0 to 50. The internal amp can also be turned
off when all the speakers are powered by outboard amplifiers.
Volume Adjust: The input level of each source (other than
FM) is adjustable relative to the FM radio volume, so there isn't a significant
volume difference when changing sources. Each source is individually adjustable
from -5 to +5.
2.5V/6CH Preamp Output: The KW-NT510HDT
is equipped with three
pair of 2.5V preamp outputs (Front/Rear/Subwoofer). The front & rear preamp
outputs offer balance/fade control and are designed to hookup to a full-range
4-channel amplifier. The subwoofer preamp output is non-fading and designed to
hookup to a mono-block subwoofer amplifier. You can adjust the head unit's
subwoofer level between -50 and +10.
Digital Crossover Network: The KW-NT510HDT features a
variable high pass crossover for the front & rear speakers, as well as a low
pass crossover for the subwoofer.
- Front: Frequency (Through,
30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB),
Gain (-8 to 0dB), Tweeter Level (-8 to 0dB)
- Rear: Frequency (Through,
30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB),
Gain (-8 to 0dB)
- Subwoofer: Frequency (Through,
30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB),
Gain (-8 to 0dB), Phase (Normal/Reverse)
Equalizer: The JVC KW-NT510HDT
provides both a Preset EQ for quick musical
adjustment and 13-Band EQ for more advanced customization.
- Preset EQ: Choose from Flat, Dynamic, Bass Boost, Natural, Vocal
Boost, Vibrant, or User 1/2/3/4.
- 13-Band EQ: Each user mode lets you adjust the head unit's
13-band equalizer; 62.5Hz, 100Hz, 160Hz, 250Hz, 400Hz, 630Hz, 1kHz, 1.6kHz, 2.5kHz,
4kHz, 6.3kHz, 10kHz, and 16kHz (+/- 9dB).
Note: You can store EQ settings
for each source (Disc, Tuner, AV-IN, USB, iPod, Bluetooth, iHeart Radio, and Pandora).
DSP Control: The JVC KW-NT510HDT
's Digital Sound Processor
(DSP) offers various vehicle, audio, and driver settings to improve the sound
in your car, truck, SUV, or van.
- Vehicle Criteria: You
are able select the type of vehicle, your seated position, and
speaker distance to better quality your vehicle's sound.
- Vehicle Type: can choose what type of vehicle you
have; Compact, Full-size Car, Wagon, Minivan, SUV, or Van (full-size)
- Seated Position: for a better sound-stage you can
select your optimal listening position; choose from All, Front Left, Front Right or Front
- Time Alignment: manually fine tune the
sound stage by selecting the distance for each individual speaker in the
vehicle compared to your listening position; select between 0.0-20.01'
for the Left Front Speaker, Right Front Speaker, Left Rear Speaker,
Right Rear Speaker, and Subwoofer
- Speaker Settings: You
can set the size and location of your vehicle's speakers.
- Front: Size (OEM,
3.5", 4", 5", 5.25", 6.5", 6.75", 7", 4x6", 5x7", 6x8", 6x9", 7x10");
Location (Door, On Dash, Under Dash), Tweeter (None, Small, Medium,
Large)
- Rear: Size (None,
OEM, 3.5", 4", 5", 5.25", 6.5", 6.75", 7", 4x6", 5x7", 6x8", 6x9",
7x10"); Location (Rear Deck, Door)
- Subwoofer: Size (None, 6.5", 8", 10", 12", 15")
- Sound Enhancements: The head unit provides further
audio enhancement for better sound in your vehicle.
- Space Enhancer: set the Space Enhancer to
Small, Large, or Off. Each setting value indicates the soundscape level
- Sound Stage Elevation:
creates an affect of hearing the sound from a higher place than the
actual position of your vehicle's speakers
- Loud (Loudness): boosts low and high frequencies to produce
a well-balanced sound at a low volume level
- Bass Boost: four-step Bass Boost (Off/1/2/3) to
enhance your music's lower frequencies
- Compressed Music Enhancers: The head unit offers several audio
adjustments dedicated to enhance the sound quality of your compressed
digital music.
- Audio Contrast: sharpens vague sound to make the audio more realistic;
effective for compressed music data
- D.T. Expander (Digital Track Expander): reproduces
the natural sound of digital audio sources by restoring data that was
lost and waves that were changed during audio compression to their
original states; effective for compressed music data
- Driver Sound Improvements: The KW-NT510HDT
features various audio
settings to help improve your driving and audio experience.
- Start Up Sound Level:
starts the head unit with a volume lower than when the system was turned
off; you can then manually turn it up back to the previous level
- Road Noise Compensation:
increases the volume of little sound that can be easily washed out by
road noise and boosts the bass
- Adaptive Volume: automatically increases the volume
level (both for Navigation and audio/video) as the car speeds up; you
must connect the unit's Speed Signal wire (pink/gray) to your vehicle's
speed sensor wire
- Reverse Audio Reduction: attenuates the receiver's
AV sound when you shift your vehicle into reverse, so you can
concentrate more on backing up your vehicle safely
Dynamic Range Compression: The dynamic range can be adjusted
by selecting either Normal, Wide or Dialog. Dialog makes the total sound volume
become larger as compared with Wide and Normal, allowing you to listen to the
movie's dialogue more clearly. This is effective only on Dolby Digital software.
Key Beep: The in-dash head unit provides an audible
beep to confirm button operation. This function can be turned On or Off.
AV Connections
Front-Panel Aux Input: A front-panel stereo minijack (3.5mm)
is provided to allow the connection of a portable audio source. Simply connect
your portable digital music player to the unit's front-panel auxiliary input,
and you can listen to the audio from the portable player through the speakers in
your mobile audio system.
Audio/Video Input: The rear-panel audio/video input consists
of left and right RCA audio jacks and an RCA composite video jack, allowing you
to connect external equipment to this head unit. The audio/video input can be
set to one of the following modes - AV (when connecting an audio/video
component), Audio (when connecting an audio component), and Off (when no
component is connected).
Camera In: The rear-panel Camera input consists of a
composite video connector which allows you to connect an optional rear-view
camera (105KVCM20,
sold separately). The unit features a reverse gear signal wire, that when
connected to your vehicle's reverse light circuit, will automatically switch the
KW-NT510HDT's display to the rear-view camera input. Automatic video switching
takes approximately 1.2 seconds. Audio from your music source will continue
playing, while the back-up camera is displayed. You can set the head unit to
attenuate the audio when shifting into reverse gear.
Video Output: The rear-panel Video Output consists of a
composite video jack that allows you to connect an optional external monitor.
You can watch the same video source that is being played back on the JVC
head unit on your connected external monitor (sold separately). You can select
between a 16:9, 4:3 LB, or 4:3 PS Aspect Ratio for the unit's video output to
match your connected monitor.
Remote Control
Steering Wheel Remote Compatibility: The head unit features
an OEM steering wheel remote control input (3.5mm connector) that lets you keep your vehicle's factory radio steering
wheel remote controls when used with an optional
steering wheel audio control adapter (sold separately). Please consult
Crutchfield's
Outfit My Car to see if your vehicle is compatible.