About the Polk EX Series II 6-1/2" Speakers
Sonic accuracy is the name of Polk's game, and these Polk EX Series II speakers are living proof. The EX602a 6-1/2" speakers incorporate Polk's Dynamic Balance technology, which virtually eliminates cone and basket resonance for clearer, sharper sound.
The poly semi-dome tweeters fill your car with exhilarating detail, while the moisture-resistant polymer composite woofer cones generate tight bass. The durable rubber surrounds increase speaker life and improve bass response.
Details:- mineral-filled polymer composite woofer with rubber surround
- poly semi-dome tweeter
- sensitivity 92 dB
- frequency response 75-22,000 Hz
- recommended power range 2-60 watts RMS
- peak power handling 120 watts
- top-mount depth 1-15/16"
Priced per pair
What's in the box:
Polk EX Series II 6-1/2" Speakers owner's manual
- 2 two-way speakers
- 2 foam gaskets (to reduce required cutout diameter)
- 2 grilles
- 2 grille frames
- 2-12' lengths of speaker wire (w/ quick slides on one end and bare wire on the other)
- 8-1" mounting screws
- 8 speed clips
- Manual
- Cutout template
- Registration card
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Polk EX Series II 6-1/2" Speakers

Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Semi-dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Poly | |
Woofer Composition | Polymer Composite | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1YR | |
Labor Warranty | 1YR | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 75 - 22k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.454 |
Product Research
Features
Woofers: The speaker uses a mineral filled polymer composite cone woofer with a butyl rubber surround.
Tweeters: The speaker has a poly semi-dome tweeter.
Special Features: This speaker has a step in the frame.The foam gaskets included in the box are used to reduce the cutout diameter required. If the gaskets are not used, the mounting depth and cutout diameter are greater than that shown in the "Specs" field. When the gaskets are not used, the mounting depth becomes 2.119" and the cutout diameter is 5.385". When using the provided grilles, set the grille rings on top of the speakers, then install the mounting screws through the holes in the grille rings and speaker frames. The grilles snap into the grille rings.
Loading accessories...
Customer Q&A
Loading articles...