About the Polk Audio MM571
Polk Audio continues its tradition of making brilliant-sounding speakers in stylishly designed packages their Mobile Monitor (MM) Series speakers look great and sound even better. Each speaker utilizes an extra-strong, extra-small neodymium magnet that saves space and weight, allowing these speakers to fit into more places in more vehicles while still delivering a full sound with lots of kick. Their lightweight carbon composite frames provide strong, flex-free support for the speakers' motor assemblies.
The Polk MM571 5"x7" speakers feature honeycomb-textured woven glass fiber composite woofer cones that respond very quickly for a clean, crisp, and powerful sound. Large voice coils over an inch in diameter give the speaker high power-handling capability and extended reliability. 1" silk dome tweeters add a sweet high end that blends perfectly with the low notes so your music stays in harmonic balance, from the electric bass all the way on up to the cymbals.
Important Note: These Polk speakers use a low-impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.
Priced per pair
- 5"x7" 2-way speakers (pair)
- woven honeycomb glass fiber composite woofer cone with butyl rubber surround
- 1" silk composite dome tweeter
- certified for marine use
- 2.7-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
- power range: 15-90 watts RMS (200 watts peak power)
- frequency response: 38-25,000 Hz
- sensitivity: 92 dB @ 2.83 V
- top-mount depth: 2-5/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # AA2571-A
What's in the box:
- Two 2-way 5x7"/6x8" speakers
- 2 Passive crossovers
- 8 Hex-head screws
- 4 Phillips-head screws
- 8 Speed clips
- Owner's Manual
- Product Registration information sheet
Polk Audio MM571 reviews
Thanks for submitting your review
More details on the Polk Audio MM571
Features & specs
|Tweeter Design||1" Dome|
|Tweeter Composition||Silk/polymer composite|
|Woofer Composition||Glass Fiber Composite|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||92|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||38 - 25k Hz|
|Minimum RMS Wattage||15|
|Maximum RMS Wattage||90|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||2 9/16|
|Bottom-mount Depth (Inches)||2 13/16|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.4425|
Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.
Klippel Optimized Components: Using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer's motor structure, voice coil alignment and suspension for the best possible performance, even at extreme listening levels.
Woofer Cones: Woven glass composite cones feature tremendous stiffness-to-mass ratio. Lower mass means faster transients and finer detail.
Butyl Rubber Surrounds: For a smoother response and improved durability, the woofers use butyl rubber surrounds. The airtight rubber surrounds stand up to moisture, sunlight and extreme temperatures while allowing long excursion linear motion and years of reliable use.
Silk/Polymer Composite Tweeters: The 1" liquid-cooled, silk/polymer composite tweeters provide clear, detailed highs.
Neodymium Magnets: The speaker's neodymium magnets offer exceptional strength to performance ratio and is extremely lightweight.
Large Diameter Voice Coils: Large diameter, 30mm voice coils increase the speaker's reliability and power handling capacity.
Carbon Composite Basket: The speaker's carbon composite basket is lightweight and will not flex during music audio peaks.
Crossover: The speaker comes supplied with two separate 2-way crossovers; one for each speaker. Each crossover input 36" lead is terminated with tinned wire, and the two 20" output leads (one for the woofer and one for the tweeter) are terminated with female quick-slides. The positive woofer lead has a 0.250" female quick-slide and the negative woofer lead has a 0.187" female quick-slide. The positive tweeter lead has a 0.187" female quick-slide and the negative tweeter lead has a 0.110" female quick-slide. These quick-slides connect directly to the woofer and tweeter terminals on each speaker. The separate 2-way crossover network sends the appropriate frequencies to each driver for cleaner sound and better imaging. Dimensions: width = 3.515", height = 1.015", depth = 2.645"
Mounting: This speaker can be used in both 5x7 and 6x8 applications. The speaker's integrated mounting ring allows the speaker to be mounted in a 5x7 or 6x8 cutout.
Note: This speaker does not come supplied with grilles. You will need to use your factory grilles.
Marine Certified Woofer: Polk MM Series speakers are built to withstand exposure to moisture and UV rays, so they work well in boats and cars. They also include stainless mounting hardware for corrosion and rust resistance.
2 questions already asked