About the Polk Audio MM 652
Next-level Polk speakers
Next-level Polk speakers
We're big fans of Polk speakers for their reliability and precise sound, and their premium Mobile Monitor Series MM 652 6-1/2" car speakers only improve on that well-earned reputation. You can count on low distortion and maximum performance from this flagship Polk line, the result of years of research and development. These rugged car speakers are ultra-marine certified, able to shrug off harsh environmental abuse to deliver exceptional sound for nearly any application, from cars to boats.
Don't be shy with the power
The highly efficient speakers will work well with an aftermarket radio, but keep in mind that they will really show off their stuff with a lot of power from an aftermarket amp. The titanium-coated 6-1/2" polymer woofer cone, backed by a space-efficient magnet, delivers the full sound you've been hungry for. A low-profile, lightweight carbon basket features excellent venting to keep these speakers cool when you're really pouring on the power. And your music's high frequencies will soar, thanks to delicate handling by the newly designed 1" Terylene fabric dome tweeter.
- 6-1/2" 2-way speakers
- titanium coated polymer woofer cone with Santoprene rubber surround
- 1" Terylene fabric tweeter
- certified for marine use (IP56 rating)
- non-corrosive fiberglass reinforced ABS basket
- epoxy coated crossovers
- waterproof surrounds
- weep holes for proper drainage
- handles up to 100 watts RMS (300 watts peak power)
- frequency response: 40-40,000 Hz
- sensitivity: 93 dB
- cut-out diameter: 5"
- top-mount depth: 2.62"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # AA8652-A
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Mounting bracket adapters
- 2 Foam gaskets
- Two 38" Lengths of speaker wire (quick slides on one end and tinned wire on the other)
- Eight 1" Stainless steel screws
- 8 Stainless steel speed clips
- 2 Factory grille badges
- Installation / Specification sheet
- Online product registration information
Polk Audio MM 652 reviews
Thanks for submitting your review
More details on the Polk Audio MM 652
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||1" Dome|
|Tweeter Composition||Terylene Fabric|
|Woofer Composition||Titanium Coated Composite|
|Woofer Surround||Santoprene Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||93|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||40 - 40k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||300|
|Top-mount Depth (Inches)||2 5/8|
|Bottom-mount Depth (Inches)||2 15/16|
|Cutout Diameter or Length (inches)||5|
|Mounting Height (Inches)||0.745|
Size Classification Note: These speakers are marketed as 6½"; they will fit in standard 6½" speaker openings, but do not use the standard 6½" speaker bolt pattern. In order to install them in standard 6½" speaker openings you must drill new screw holes. If new holes are drilled in the mounting surface of the car, no bracket is needed. If drilling in the car is not an option, the included brackets can be used, which have standard 6½" mounting holes, the Ford non-symmetrical four hole pattern, and non-standard 6¾" three and four hole patterns. Please enter your vehicle information to confirm fit.
Note: The opening for a standard 6½" speaker is not a 6½" diameter hole. (It's approximately 5" in diameter.)
Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.
Rubber Surrounds: The inner and outer woofer surrounds are Santoprene rubber, to keep water from leaking through the speaker.
Swivel Tweeters: The 1" tweeters pivot, so they can be angled for optimum imaging. The tweeter material is Terylene, a brand name of polyethylene terephthalate (PET).
Neodymium Magnets: The speakers' neodymium magnets offer exceptional strength to performance ratio and are small and lightweight.
Basket: The speaker baskets are fiberglass reinforced ABS, lightweight and corrosion resistant.
Crossover: The crossover components are coated with epoxy to prevent corrosion. The low pass filter is 1st order (6 dB/octave) and the high pass filter is 2nd order (12 dB/octave).
Ultra-Marine Certified: Polk MM1 Series speakers are tested to withstand exposure to salt-fog, UV rays, and humidity, so they'll work well in boats and cars. They also include stainless mounting hardware for corrosion resistance.
Drainage: The speaker should be mounted so the slots along the perimeter of one side of the basket are at the bottom, so any water trapped between the speaker and grille can drain.
Terminals: These speakers have 0.25" positive (+) terminals and 0.187" negative (-) terminals, which are too large for the speaker harnesses supplied by Crutchfield for many vehicle-specific applications. The speaker wire included by Polk Audio has the correct size terminals attached, so that can be spliced to an adapter harness, or optional crimp-on female quick slides can be purchased (item number 120FQS10PK, sold separately).
The Polk Audio MM 652 replaces these items
7 questions already asked