Contact us
Close contact box
Connect ID #
832 102 621 3

Call center hours

Connect ID #
832 102 621 3
Chat
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

We're sorry, chat is not available at this time. Please visit our Support page to find the help you need.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-800-955-9091

Thank you, !
Our conversation will be emailed to
Please enter a question  
Please select an email topic.  

Looking for tech support?
Please call us at 1-800-955-9091

Need help now?
Call an advisor: 1-888-955-6000

Please enter your name.  
Please enter your US phone number.  
Please enter an email.  
Please enter an email.  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

Crutchfield call centers are located in Virginia USA.

Polk Audio MM 692

Mobile Monitor Series 6"x9" 3-way car speakers

Item # 107MM692

We're big fans of Polk speakers for their reliability and precise sound, and their premium Mobile Monitor Series MM...

Find what Fits your car

We're big fans of Polk speakers for their reliability and precise sound, and their premium Mobile Monitor Series MM...

Marlon
Need help?
Contact our Virginia-based experts.

Item # 107MM692

Ships free today

In stock
$199.00 pair

Other options

Marlon
Need help?
Contact our Virginia-based experts.

About the Polk Audio MM 692

Next-level Polk speakers

We're big fans of Polk speakers for their reliability and precise sound, and their premium Mobile Monitor Series MM 692 6"x9" 3-way car speakers only improve on that well-earned reputation. You can count on low distortion and maximum performance from this flagship Polk line, the result of years of research and development. These rugged car speakers are ultra-marine certified, able to shrug off harsh environmental abuse to deliver exceptional sound for nearly any application, from cars to boats.

Next-level Polk speakers

We're big fans of Polk speakers for their reliability and precise sound, and their premium Mobile Monitor Series MM 692 6"x9" 3-way car speakers only improve on that well-earned reputation. You can count on low distortion and maximum performance from this flagship Polk line, the result of years of research and development. These rugged car speakers are ultra-marine certified, able to shrug off harsh environmental abuse to deliver exceptional sound for nearly any application, from cars to boats.

Don't be shy with the power

The highly efficient speakers will work well with an aftermarket radio, but keep in mind that they will really show off their stuff with a lot of power from an aftermarket amp. The titanium-coated 6"x9" polymer woofer cone, backed by a space-efficient magnet, delivers the full sound you've been hungry for. A low-profile, lightweight carbon basket features excellent venting to keep these speakers cool when you're really pouring on the power. And your music's high frequencies will soar, thanks to delicate handling by the newly designed Terylene fabric dome tweeter and supertweeter. 

READ LESS

Product highlights:

  • 6"x9" 3-way speakers
  • titanium coated polymer woofer cone with Santoprene rubber surround
  • 1" Terylene fabric tweeter and 3/4" supertweeter
  • certified for marine use (IP56 rating)
    • non-corrosive fiberglass reinforced ABS basket
    • epoxy coated crossovers
    • waterproof surrounds
    • weep holes for proper drainage
  • handles up to 150 watts RMS (450 watts peak power)
  • frequency response: 30-40,000 Hz
  • sensitivity: 94 dB
  • top-mount depth: 3-1/8"
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # AA8692-A

What's in the box:

  • Two 3-way speakers
  • 2 Bottom mount brackets
  • 2 Grilles
  • Two 38" Lengths of speaker wire (quick slides on one end and tinned wire on the other)
  • Eight 1" Stainless steel screws
  • 8 Stainless steel speed clips
  • 2 Factory grille badges
  • Installation / Specification sheet
  • Online product registration information

Customer reviews

Loading reviews...

Polk Audio MM 692 reviews

Average review:

30 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Polk Audio MM 692

Pat M.

Features & specs

General
Speaker Size 6X9
Design 3-way
Tweeter Design 1" Dome
Impedance (Ohms) 4
Tweeter Composition Terylene Fabric
Woofer Composition Titanium Coated Composite
Woofer Surround Santoprene Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 94
Sensitivity at 2.83 volts N/A
Frequency Response 30 - 40k Hz
Minimum RMS Wattage ---
Maximum RMS Wattage 150
Peak Power Handling (Watts) 450
Top-mount Depth (Inches) 3 1/8
Bottom-mount Depth (Inches) 3 15/16
Cutout Diameter or Length (inches) 0
The Polk Audio MM 692 replaces these items:

Product Research

Features

Mounting Applications: Although bottom mount brackets are included, the speakers can be bottom mounted without them, resulting in a mounting depth of 3.378" and a tweeter protrusion of 0.742". The brackets can also be used as top mount spacers, resulting in a mounting depth of 2.566" and a mounting height of 1.554".

Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.

Rubber Surrounds: The inner and outer woofer surrounds are Santoprene rubber, to keep water from leaking through the speaker.

Tweeters: The tweeter and super tweeter material is Terylene, a brand name of polyethylene terephthalate (PET).

Neodymium Magnets: The speakers' neodymium magnets offer exceptional strength to performance ratio and are small and lightweight.

Basket: The speaker baskets are fiberglass reinforced ABS, lightweight and corrosion resistant.

Crossover: The crossover components are coated with epoxy to prevent corrosion. The low pass filter is 1st order (6 dB/octave), the high pass tweeter filter is 2nd order (12 dB/octave) at 3.5 kHz, and the high pass super tweeter filter is 3rd order (18 dB/octave) at 4.5 kHz.

Ultra-Marine Certified: Polk MM1 Series speakers are tested to withstand exposure to salt-fog, UV rays, and humidity, so they'll work well in boats and cars. They also include stainless mounting hardware for corrosion resistance.

Drainage: The speaker should be mounted so the slots along the perimeter of one side of the basket are at the bottom, so any trapped water can drain.

Loading accessories...

Customer Q&A

6 questions already asked

Q
Can I power a pair of these with 2 channels off Alpine KTP-445U?
[ A  Nov 25, 2019 ]
1 answer
A
That KTP-445U amp can power these speakers. If you bridge the amp so it's only working as a 2 channel amp, then you can give the speakers even more power for better performance
[ Paul  Dec 08, 2019 ]  Staff
Q
What is the reason they won't they fit my Mercury Grand Marquis GS Back deck or Doors? Haven't bought em yet but I want those in my car.
[ Thomas  Sep 21, 2019 ]
1 answer
A
What year is your Grand Marquis? It might have to do with the mounting depth, height, or shape of the speaker. You can connect with one of our product advisors to see if it is a close enough fit to try or if there might be a better option: https://www.crutchfield.com/I-rET1c290/S-SUliZgSTXG7/support/ContactUs.aspx
[ Cosmo  Oct 02, 2019 ]  Staff
Q
My 2005 honda civic takes 6×9 speakers in the rear why would the polk audio MM 692 series not fit?
[ Chris  Jul 29, 2018 ]
1 answer
A
The only thing that i can think of if there's something restrictive above or below. On most hondas, below isnt an issue, usually, because there isn't anything below the speaker cutout. But main issue you may run into the the fitment above the speaker cutout and the rear deck cover. These speakers need probably about a good half inch between the surface they mount to and whatever sits above them. Possibly more than that. I would recommend looking at a pdf user manual on polks website, or here in crutchfield. The user manual should show exact measurements, then add about a quarter inch to the top for speaker travel.
[ Scott  Jul 29, 2018 ]
Q
150 rms per pair or each?
[ Edifier1  Jul 08, 2018 ]
3 answers
A
I would say yes to each one. I always call the guys there and they can answer any question you have. Plus in the description it says 150 RMS https://www.crutchfield.com/p_107MM692/Polk-Audio-MM-692.html?search=mm_692&skipvs=T
[ TeaBags  Jul 08, 2018 ]
A
Per speaker! I've been enjoying them - they sound very good I'm running an Alpine x- A70F amp with four of them
[ Matthew  Jul 08, 2018 ]
A
Each speaker. They sound great
[ Clayton  Jul 08, 2018 ]
Q
I am looking at these for my boat but I have exactly 6 inches total to fit them into from top to bottom? Not the cut out hole size but total size of speaker cannot be taller than 6 inches. I don't see here the total size but I did go to Polks website and it says 6 inches but I want to be sure. Mabey if you could look at one and take a tape measure to it. If these wont work I still need the size of the 5x7 version of the same speaker top to bottom total inches. Side to side I have room.
[ Sean  Mar 19, 2018 ]
4 answers
A
I read this question differently than the other answers given. the height of the speaker from the bottom of the magnet to the top fo the speaker is 4".
[ Mark  Apr 02, 2018 ]
A
From center top to center bottom is 6 3/8"
[ Scott  Mar 28, 2018 ]
A
If it's a 6 inch speaker it should fit. If you want a 6.5" they should carry a adapter for it as well. Me personally I would stay away from a 5x7. I just ended up switching my 5x7 speakers to 6x9. I'm running a pair of MM 692 6x9's and a pair of DB6502 6.5" speakers.
[ TeaBags  Mar 28, 2018 ]
A
Yes sir they are exactly 6 inches accross Or top To bottom
[ DEAN  Mar 28, 2018 ]
Q
Can these speakers be out into a box and if so what size. Ported or unported. Are the better with or without a box?
[ Dustin  Dec 12, 2017 ]
2 answers
A
I called Polk Audio and they can be boxed and sealed.
[ TeaBags  Jul 08, 2018 ]
A
These 6x9 speakers can be put into a box. Since they are designed for free air applications, there is no requirements for a box short of the speakers fitting the box. You can put them into a sealed or ported box and we would expect little to no difference in their sound. We carry 2 types of boxes that can hold them: https://www.crutchfield.com/g_178650/Empty-Subwoofer-Boxes.html?tp=61651#&nvpair=FFSpeaker_Size|6X9 My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
[ Paul  Dec 18, 2017 ]  Staff
SHOW MORESHOW LESS

Loading articles...

Compare all details
TOP