Name: Polk Audio TSi300
Brand: Polk Audio
SKU: 107TSI300B
Price: 179.00 USD
Availability: InStock
Rating: 5 (228 reviews)

OVERVIEW

Music lovers and movie buffs alike will enjoy the smooth, clean sound of the Polk TSi300. Its silk tweeter delivers sparkling highs, while two polycarbonate woofers churn out accurate mids and lows. The braced MDF cabinet fights resonance so the details in your music and movies shine through. Dual five-way binding posts let you bi-amp or bi-wire the TSi300 for even better performance — a rare feature for a speaker in this price range.

KEEP READING

A woodgrain vinyl finish gives the TSi300 a refined looked, capped by an elegant piano black top plate. At the base of the speaker you'll find sturdy stabilizer feet to keep it anchored to your floor, regardless of whether it's carpeted or non-carpeted. And since the speaker's footprint takes up less than one square foot, you can enjoy authoritative tower speaker sound without sacrificing a lot of space.

Got wire?
Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

READ LESS

Product highlights:

bass-reflex (ported) design
frequency response 47-24,000 Hz (-3dB)
handles 20-150 watts
1" Dynamic Balance® silk dome tweeter
dual 5-1/4" polycarbonate woofers
8-ohm impedance
sensitivity 90 dB
dual 5-way binding post terminals
woodgrain vinyl finish with piano black top plate
8-3/16"W x 36-1/4"H x 11-3/4"D
warranty: 5 years
Our 60-day money-back guarantee

Priced each

MFR # AM5205-A

What's in the box:

Polk Audio TSi300 owner's manual

Black tower speaker
Detachable cloth grille (installed)
Owner's Manual
Wall-Mount template
Online registration sheet
Polk Audio product brochure

Featured review

I've had a pair of these since 2012 and couldn't be more pleased with their sound or looks - still to this day. Beautifully handles all of the music and cinema we throw at them.

Eric from Watkinsville, GA

See all 228 reviews

Customer Q&A

They seem to be the Polk Audio TSi200 in a larger cabinet. Does the cabinet need to be insulated from a carpet? ie: do they need to stand on some sort of low plinth?

No!

12 reasons to shop with us

Articles, DIY tips, and videos

Our experts help you shop smart.

See all reasons

REVIEWS

Loading reviews...

Polk Audio TSi300 reviews

Average review:

228 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Verified customer

Verified employee purchase

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

DETAILS

Researched by Crutchfield's Stacey B.

Features & specs

General
Enclosure	Bass Reflex
Finish	Wood-grain vinyl
Color	Black
Tweeter	Soft-Dome
Tweeter Size (inches)	1
Midrange Size (inches)	N/A
Woofer Size (inches)	5.25
Woofer Composition	Organic Fiber
Woofer Surround	Butyl Rubber
Built-in Powered Sub	No
Dolby Atmos Drivers	No
Video-Shielded	No
Connector Type	5-way post
Bi-amp Inputs	Yes
Parts Warranty	5 Years
Labor Warranty	5 Years
Specifications
Power Range	20-150
Frequency Response	47-24k Hz
Sensitivity	90 dB
Impedance (Ohms)	8
Subwoofer Amp Power	---
Height (inches)	36-1/4
Width (inches)	8-3/16
Depth (inches)	11-3/4
Weight	26 lbs

The Polk Audio TSi300 replaces these items:

Product Research

Driver Technology
Enclosure Design
Connections
Mounting Options

Driver Technology

Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.

Klippel Optimized: Using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the speaker structure and cabinet design for the best possible performance, even at extreme listening levels.

High Efficiency Design: Compatible with practically any AV receiver, these speakers produce sound that is open, spacious and clear, even when driven by modestly-powered amplifiers and receivers.

Bi-Laminate Composite Woofers: The speaker features two 5.25" bi-laminate composite dynamic balance drivers which are light and stiff for deep bass response and low distortion. For high performance durability, each woofer uses a butyl rubber surround.

Silk dome Tweeters: The speaker features a 1.0" silk dome dynamic balance tweeter for detailed highs. The tweeter features mylar bypass capacitors in the crossovers to extend high frequency response and improve detail and transparency.

Frequency Response: The overall frequency response is 35Hz-25kHz and the -3dB frequency response is 47-24kHz.

Enclosure Design

Quality Built Cabinets: The TSi speaker cabinets are extensively braced MDF with ¾" thick baffles. With pewter accents, a piano black top plate and removable black grille, TSi speakers look awesome and take up less than one square foot. All models are available in a choice of black or cherry wood-grain vinyl finishes.

Narrow Baffle Geometry: Narrow baffle geometry is a design that creates a sleek looking speaker with great sound. The high quality cabinet is slender and tucks away easily in your room. The smaller-diameter speaker components are lighter in mass, translating to clearer sound.

Flared Ports: All TSi speakers feature critically-tuned flared ports. Flared ports minimize port noise ("chuffing") and ensure good low frequency extension with low distortion. With flared ports, TSi speakers reveal realistic, natural, full-bodied sound with rich bass. These TSi floorstanding speakers feature a down-firing power port.

Connections

Dual 5-Way Binding Posts: The speaker has two sets of gold-plated 5-way binding posts connected by gold-plated jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speakers.

Mounting Options

Placement: Create an equilateral triangle between the speaker and the listening position. If you notice video distortion or discoloration, immediately move the speaker away from the video source.

Built-In Conical Feet: The speaker features four built-in conical feet to ensure stability for precise bass response and superior imaging.

The Polk Audio TSi300 replaces these items

Polk Audio TSi300

Floor-standing speaker

Cherry

228 reviews

bass-reflex (ported) design
frequency response 47-24,000 Hz
Dynamic Balance® tweeter

Boston Acoustics CS 226

Single floor-standing speaker

Black

7 reviews

voice-matched to other Classic Series speakers
frequency response 46-25,000 Hz (±3dB)
dual 6-1/2" graphite-injected polymer woofers

ACCESSORIES

Loading accessories...

Q&A

17 questions already asked

i have a two channel sherwood receiver 100 w x 2. would i need to bi amp a pair these TSI 300's to get good sound?

[ Brian Jan 24, 2021 ]

2 answers

No. You would be fine with or without bi amp.

[ Keith Jan 25, 2021 ]

These replaced a set of speakers so old the cones of the woofers had deteriorated. Just an old Sony receiver and somebody's bass amp for the woofers. It sounds OK to my old ears. If your ears are good enough to enjoy separate biamps for each speaker I expect you would want much more refined speakers.

[ John Jan 24, 2021 ]

My receiver(STR-DB930) has an speaker A and a speaker B speaker output, IF I were to use both to power a set of TSi300's or S50's, would that be considered "bi-amping"...???

[ Brian Jul 20, 2020 ]

1 answer

No.. That would be considered bi-wiring.

[ GARY J Mar 06, 2021 ]

This Speaker it is a good choice for Yamaha R-S202??

[ Javier Jul 01, 2020 ]

1 answer

I don't know why not. Yamaha makes fine equipment. The R-S202 specs at 140 watts; I'm using the speakers with an old, 150 watt Sony with no probs.

[ John Jul 02, 2020 ]

Is there a minimum/recommended listening distance for these (TSi300)? From seating, listening distance is only 7-8 feet from speaker and I'm afraid they may be too big/close. Please advise.

[ Clayton May 07, 2019 ]

2 answers

We bought these about a year and a half ago. We have dining room chairs 3-4 feet from one of the speakers and we haven't had an issue with 'too close.' I will add that after we bought these speakers, every song felt like we we're hearing it for the first time! The sound is AMAZING and these speakers worth every cent!

[ THERESA May 08, 2019 ]

I haven't noticed a problem with minimum distance. I use these speakers for a temporary outdoor theater in the backyard when the weather warrants it. I calibrate the entire system (5.1) with the receiver's proprietary microphone. The kids sit the closest at about 6-8 feet from the center channel.

[ STEPHEN H May 07, 2019 ]

Would these speakers be compatible with Sony STRDH130 2 Channel Stereo Receiver?

[ skeetz27 Aug 31, 2018 ]

5 answers

Yes, they will work. And I love these speakers.

[ Karen Aug 31, 2018 ]

Not sure but these speakers are capable of regular positive & negative hook up via speaker wire given your receiver outputs. Check how much power your receiver sends to speakers & compare to how much speakers can handle.

[ Keith Aug 31, 2018 ]

The SONY is rated 100 watts per stereo channel, and the Polks will handle that. Now, as to what you do with it, ah there's the question, the Polks may behave better with more power for LOUD rock, but normal listening volume should be just fine. I drive mine with a NAD integrated amp, rated about 40 per channel, and I have beautiful sound, so the SONY should be FINE!!

[ ROBERT W. Aug 31, 2018 ]

I do not know, but I will see if the person who selected and set them up might know. I will get back with you.

[ Karen Aug 31, 2018 ]

I looked at the specs on the receiver and it's 8 ohms. These speakers should work well. You'll have to keep them bi amped (the metal piece connecting the two terminals) since the receiver only has two channels.

[ Matthew Aug 31, 2018 ]

Are these Polk Speakers compatible with your Onkyo TX-NR656 Receiver? I am looking to purchase this receiver, but need a decent pair of speakers in this Polk price range

[ James Feb 16, 2017 ]

4 answers

With "100 watts per channel into 8 ohms (20-20,000 Hz) at .08% THD, with 2 channels driven" stereo sound will be FINE. Polk makes good speakers. But if you plan using 7.2 setup fully, remember to keep to efficient speakers for the rest of the channels.

[ ROBERT W. Aug 31, 2018 ]

Although I've never used Polk speakers, I am using premiere acoustics speakers and I believe you will get better results with Polk..

[ julian Feb 17, 2017 ]

Yes they are. However I would go with the TSI400 or even better yet the TSI400 you can still find them oN line cheep.

[ BRAD Feb 17, 2017 ]

The Polk Audio would be a good match with the Onkyo receiver.I have a bigger model polk towers hooked up to mine and they sound great.If you are using to play movies,make sure to get a good center channel speaker too.

[ Guest Feb 17, 2017 ]

How is the dual connectors wired on the tsi1300tower speakers?

[ Rickey Aug 27, 2016 ]

3 answers

They come with a hard metal connector, connecting bass and treble terminals. Remove to biwire, leave it there to have single wires coming in.

[ ROBERT W. Aug 31, 2018 ]

With jumpers

[ WILLIAM B Aug 29, 2016 ]

There are two sets of red & black connectors. You use just one set for a normal connection, and for bi-amping you use all four after removing the metal jumpers.

[ Tom Aug 27, 2016 ]

Hi .. How bad are the scratches & dents? and where are they? Is it possible for Crutchfield to send me a couple pictures?

[ Hoa Oct 31, 2015 ]

1 answer

Scratch and Dent items are generally product returns from Crutchfield customers. All of these products have been thoroughly inspected by our return technicians to ensure functionality and to make sure the cosmetic integrity is still in tact. They also come fully covered by a manufacturer's warranty and our 60-day satisfaction guarantee, same as new. You can view pictures of items previously sold from our Scratch and Dent stock here: http://www.crutchfield.com/product/outlet/CloserLook.aspx

[ Larry Nov 01, 2015 ] Staff

how do i bi- amp these speakers?

[ ira Apr 30, 2014 ]

1 answer

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They will be able to walk you through how to bi-amp the speakers. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. You can find out more about bi-amp here: http://www.crutchfield.com/learn/blogs/av_tips/archive/2008/04/23/are-you-sitting-on-a-wealth-of-untapped-power.aspx?showAll=N If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

[ Jeff May 01, 2014 ] Staff

do you get a pair of speakers or is it just 1?

[ ryan Nov 26, 2013 ]

1 answer

The price is listed each - so it will be for just one speaker.

[ Jeff Nov 26, 2013 ] Staff

They seem to be the Polk Audio TSi200 in a larger cabinet. Does the cabinet need to be insulated from a carpet? ie: do they need to stand on some sort of low plinth?

[ iceflow Dec 03, 2020 ]

5 answers

No!

[ MICHAEL Dec 16, 2020 ]

They are basically built on a platform. Slightly elevated off the carpet. They sound great!!

[ NORMAN Dec 08, 2020 ]

I have mine standing directly on medium shag carpet. They seem pretty stable and I don't think the sound is any less effective.

[ HAROLD Dec 08, 2020 ]

A plinth?

[ Vern Dec 07, 2020 ]

Mine are on the carpet. There are fairly large plastic feet on all 4 corners. We have a medium pile carpet and there is a half inch or so between the top of the carpet and the bottom of the speaker cabinet.

[ WALTER G Dec 07, 2020 ]

Will the Tsi300's match up well with MTX AAL 1540 speakers and my Technics SU V78? I'm also using a Technics SH 8020 24 band EQ.

[ Guest Nov 24, 2020 ]

1 answer

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

[ Calvin Dec 08, 2020 ] Staff

Would these make good rear surround speakers?

[ Doctor Love Jun 22, 2020 ]

2 answers

dont see why not

[ Richard Jun 22, 2020 ]

These speakers were a Christmas Gift and he recipient really love the quality of these speakers. That's all I know.

[ William Jun 22, 2020 ]

How will my Yamaha Rx-385 work out with these?

[ Ryan Jun 15, 2020 ]

3 answers

I would think great. I have a Yamaha R-N303 and it's 100 watts per channel like the one you have. Buy a set of Crutchfield 14-gauge speaker wire with pre-attached banana plugs and you will have them set up in no time. My family streams TV audio through them by connecting the TV to the amp with an optical cable and it sounds really good especially when they play a movie. I stream music from an iPod by Bluetooth to the amp and that sounds great. As reasonably priced as they are you can't go wrong.

[ Bob Jun 15, 2020 ]

I believe the RX-385 puts out around 70 watts? This speaker will work out perfect.......all the positive reviews are correct. It's a nice warm speaker, with crystal clear highs and a mid-range you can feel in your chest. Without getting into specifics, I have higher end equipment for my front and center channel speakers. I actually purchased these for my rear speakers, and raised them off the ground ( approximately 2 feet ) on end tables. These were actually the biggest surprise of my system. They sound awesome! As long as you know how to calibrate your Receiver, and then maybe do a few manual adjustments to the db's, bass, and treble, I think you will really like these. If you want super loud bass, you will want to add a sub. But overall for a budget speaker you can't beat these! These things will crank!

[ KARL Jun 15, 2020 ]

Should work out just fine. I use these with a Denon A/V receiver and for a home theater setup, for front channel. They don't need too much power to drive, and sound much better than smaller front satellite speakers - sound is crisp and clear.

[ LUIS Jun 15, 2020 ]

Are the feet removable?

[ Chad Oct 13, 2019 ]

2 answers

They don't appear to be removable. They are glued on to the sides of the speakers and I didn't see any screws to remove them

[ skeetz27 Oct 14, 2019 ]

[ 94776 Oct 13, 2019 ]

1) The desc says ported. I do not see a port in the pictures, where is it? 2) It is not shielded how far should it be from lcd TV? Thanks

[ Larry Oct 15, 2017 ]

4 answers

The Port of these speakers is at the bottom of the cabinet (Down Fire Port). If your TV or Monitor is LCD, LED or OLED, do not worry as these types of TV is not affected by Magnetism.

[ JESUS Oct 31, 2017 ]

Up date to my earlier answer. The speakers are ported through the bottom, this the ports are not visible.

[ Alan Oct 17, 2017 ]

Port is on the bottom. My speakers are maybe 2 feet from a 55-inch LED and they work just fine.

[ Dennis Oct 17, 2017 ]

I am using both the TSI 300 speakers and TSI 400 speakers. I use the 300's for the rear speakers and the 400's for the front speakers. Question 1: Ported - I have never noticed the ports, maybe in the bottom (guessing).. I'm going to check when I get home as I'm now curious. Question 2: How far from the LCD TV: Generally my front speakers are about 4-8 feet either side of the TV (65" Sony). The difference in distances depends on how the room is set up. BUT, I also have the Polk CSI-A4 center speaker which lives about a foot under the TV. I've never had an issue with interference. Years ago I had a different system with a plasma screen and definitely had an issue, but none with the Polk and Sony combination.

[ Alan Oct 17, 2017 ]

Can this speaker be used as a center channel to match the same left and right? Are there any pluses or minuses to this configuration?

[ R. S. May 15, 2017 ]

3 answers

I suggest the Polk Audio TSi CS10 (Cherry) that is the perfect center channel companion speaker. Unfortunately Crutchfiiels only sells the model in black.

[ JESUS Oct 31, 2017 ]

During your planning make sure to consider how high the tv would be if you placed it above the speaker. Avoid placing the tv so high your neck so your neck starts to ache from looking up for a whole movie. I wouldn't recommend placing the speaker on its side because of its design.

[ SEAN P May 17, 2017 ]

To big

[ KENNETH May 15, 2017 ]

SHOW MORESHOW LESS