About the Polk Audio TSx440T
Full-bodied sound for your music and movies
Full-bodied sound for your music and movies
No matter what you love to watch or listen to, Polk Audio's TSx440T high-performance towers deliver sweet sound that will make your home theater rock, and put a smile on your face. These floor-standing speakers feature a 1" silk/polymer dome tweeter for clear, detailed highs and three 6-1/2" Dynamic Balance® woofers for taut, tuneful bass. Pick up a pair for stereo music, or use them as your front left and right speakers in a home theater setup.
Designed and built for exceptional performance
Polk carefully builds the TSx-series speakers using advanced manufacturing techniques and high-quality materials — they put a lot into them so you get a lot out of them. Each one boasts Polk's exclusive Dynamic Balance® drivers — a bi-laminate design of fiber-infused polymers sandwiched together to form a strong yet highly efficient lightweight cone for natural, low-distortion sound. Polk puts these advanced drivers through extensive testing to find and eliminate resonance points, ensuring that everything you listen to sounds clean and accurate.
Polk also paid special attention to the TSx crossovers, using a high-performance design with premium parts like Mylar bypass capacitors to deliver smooth and extended high-frequency details. Even the enclosures contribute to great sound. Their attractive cabinets use non-resonant MDF (Medium Density Fiberboard) and non-parallel curved side panels to create a rigid, acoustically inert structure that effectively reduces audible coloration.
- bass-reflex (ported) design
- frequency response: 43-24,000 Hz (-3dB)
- recommended amplifier power: 20-200 watts
- 1" silk/polymer Dynamic Balance® dome tweeter
- three 6-1/2" Dynamic Balance bi-laminate composite woofers with butyl rubber surrounds
- impedance: 8 ohms
- sensitivity: 91 dB
- front-firing tuned port makes speaker less sensitive to room placement and allows closer placement to a wall
- dual 5-way gold-plated binding posts allow bi-wiring or bi-amping
- woodgrain vinyl finish
- 10-1/8"W x 40-15/16"H x 15-5/8"D
- weight: 39.2 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # AM6442-A
What's in the box:
- Floor-standing loudspeaker
- Detachable cloth grille (installed)
- Owner's Manual
- Online registration sheet
Polk Audio TSx440T reviews
Thanks for submitting your review
More details on the Polk Audio TSx440T
Features & specs
|Tweeter Size (inches)||1|
|Midrange Size (inches)||N/A|
|Woofer Size (inches)||6.5|
|Woofer Composition||Bi-Laminate Composite|
|Woofer Surround||Butyl Rubber|
|Built-in Powered Sub||No|
|Dolby Atmos Drivers|
|Connector Type||5-way post|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
|Frequency Response||43-24k Hz|
|Subwoofer Amp Power||---|
TSx Series Loudspeaker: Introducing the TSx Series of loudspeakers from Polk; stylish and quality-built for high performance. The high efficiency TSx Series loudspeaker features a unique curved enclosure wrapped in a wood-grain vinyl. The loudspeaker employs Dynamic Balance tuned drivers and tweeters for realistic mid-range, deep, well-blended bass, and incredible detail - for a classic Polk sound that is naturally open, spacious, and clear.
High Efficiency Design: The TSx Series loudspeaker can be driven by practically any electronics, even the most modestly-powered amplifier or receiver. Whether you're connecting them to the newest digital receiver, or to your vintage amp, the TSx Series loudspeaker can produce sound that's spacious and clear, enveloping and realistic.
Dynamic Balance Drivers: The TSx Series loudspeaker uses Polk's Dynamic Balance Driver Technology for great sound. Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion. Using just the right materials enables Polk to tune out performance-robbing resonances before they occur.
Klipple Optimized Motor: Klipple Optimized Motor employs a laser and sophisticated software for large scale analysis of the TSx Series loudspeaker's drivers in motion. Using this state-of-the-art laser and software process, Polk engineers were able to optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.
Silk/Polymer Dome Tweeter: The TSx440T tower loudspeaker features a 1.0" silk/polymer Dynamic Balance dome tweeter with a powerful neodymium magnet structure that delivers clear and detailed highs for realistic reproduction of vocals and instruments, without fatigue.
Bi-Laminate Composite Woofers: The TSx4400T tower loudspeaker features three 6.5" bi-laminate composite Dynamic Balance midbass/midrange drivers for crisp, detailed midrange and smooth, natural bass extension. These Dynamic Balance bi-laminate composite cone woofers are lightweight and stiff with exceptional damping. They use butyl rubber surrounds, vented polyamide voice coils, massive motor structures, and high-temperature aramid fiber spiders to create a driver of exceptionally high efficiency, clear bass, better linearity, lower distortion, and greater durability.
High Performance Crossover: The loudspeaker employs a high performance crossover system for optimum blending and time alignment of the overall speaker. Mylar bypass capacitors are used to reveal extended high frequency details.
TSx-Series Timbre-Matched: All Polk loudspeakers are timbre-matched within their series, designed with the same components throughout, to achieve seamless speaker-to-speaker blending effects in multi-channel systems.
Frequency Response: The TSx440T tower loudspeaker has an overall frequency response of 33Hz-25kHz, while the -3dB frequency response is 43-24kHz.
Curved MDF Cabinet: The TSx440T tower loudspeaker utilizes a unique curved cabinet design which creates a stronger, more rigid and acoustically inert enclosure. The elegantly curved side panels, which create non-parallel surfaces, reduce unwanted internal standing waves for less audible coloration. Non-resonant all-MDF construction with front-to-back and side-to-side internal bracing, and a 3/4"thick baffle ensures cleaner, clearer, more lifelike sound quality.
Note: The TSx440T tower loudspeaker is available in either a black or cherry finish.
Flared Port: The TSx Series loudspeaker features a critically-tuned, front-firing 3" flared port. The flared port improves air flow and minimizes port noise ("chuffing"), while ensuring good low frequency extension with low distortion. This flared port design lets the TSx speaker reveal realistic, natural, full-bodied sound with rich bass.
Anti-Diffraction Grille: The computer modeled anti-diffraction grille minimizes grille interference, so it doesn't get in the way of your sound. This black cloth grille is detachable.
Dual 5-Way Binding Posts: The TSx440T tower loudspeaker has two sets of gold-plated 5-way binding posts connected by gold-plated jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speakers. The 5-way binding posts will accept bare wire (up to 10AWG), pin-connectors, spade-connectors, and banana plugs (single or dual). The speaker terminals are color coded for easy identification between positive (red) and negative (black).
Placement: Create an equilateral triangle between the speaker and the listening position. If you notice video distortion or discoloration, immediately move the speaker away from the video source.
Integrated Feet: The TSx440T tower speaker features four integrated conical non-slip feet to ensure stability for precise positioning.
2 questions already asked