About the Infinity 1262w
An Infinity Reference subwoofer makes every deep note of your music count. Whether you listen to jazz, rock, hip-hop, country, or all of the above, you'll hear and feel satisfying bass with this sub in your car.
The Reference 1262w 12" sub offers a classy, no-nonsense look, with a high-gloss polypropylene cone that's accurate and hard-hitting. The durable large-roll rubber surround provides smooth, extended excursion with reduced distortion so you get impressive bass performance. Dual 4-ohm voice coils make it easy to draw big power from a compatible low-impedance amplifier or safely hook up a multi-sub system for heavy-duty low end.
The 1262w's unique motor structure cuts down on the mounting depth, and this sub works in sealed, ported, and bandpass enclosures so you get bass the way you want it. And since you want your investment to last, the 1262w features plenty of internal cooling to protect the sub's inner workings and keep it performing at its peak.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most 2-channel car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. Most mono amps are stable down to 2 ohms.
Priced per speaker
- 12" subwoofer with dual 4-ohm voice coils
- polypropylene woofer cone with large-roll rubber surround
- progressive spider design for excellent cone control
- frequency response: 23-400 Hz
- power range: 100-300 watts RMS (1,200 watts peak power)
- sensitivity: 93 dB
- top-mount depth: 6-3/8"
- sealed box volume: 1.25 cu. ft.
- ported box volume: 2.0 cu. ft.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 1262W
What's in the box:
- 12" DVC 4-ohm woofer
- Self-adhesive foam gasket
- Technical Data sheet
- Warranty card
Infinity 1262w reviews
Thanks for submitting your review
More details on the Infinity 1262w
Features & specs
|Impedance||2 ohms or 8 ohms|
|Ideal Sealed Box Volume (cubic feet)||1.25|
|Ideal Ported Box Volume (cubic feet)||2|
|Port diameter (inches)||4|
|Port length (inches)||10|
|Dual Voice Coil||Yes|
93 dB at 2.83 volts |
|Frequency Response||23 - 400 Hz|
|Max RMS Power Handling||300|
|Peak Power Handling (Watts)||1200|
|Top Mount Depth (inches)||6 3/8|
|Bottom Mount Depth (inches)||6 15/16|
|Cutout Diameter or Length (inches)||11 1/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
High-efficiency Polypropylene Woofer Cone: This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.
Large-roll Rubber Surround: The large-roll rubber surround provides optimum cone-edge suspension and absorbs distortion that may travel up the cone edge, ensuring clean, tight bass.
Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the woofer presents a 2-ohm mono load. When the voice coils are wired in series with each other, the woofer presents an 8-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4-ohm load.
Proprietary Basket: The unique in-board motor structure reduces the overall mounting depth, without limiting enclosure options.
Vented Polepiece: The vented polepiece provides additional cooling of the motor structure, thus increasing power handling.
Progressive Spider: The subwoofer uses a progressive spider, which provides better control at excursion limits than more commonly used linear spiders. The result is reduced distortion at high output levels.
Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 1.25 cu/ft. Sealed enclosures provide the most control over a woofer, will handle more power, and provide more accurate sonic reproduction, making them suitable to all types of music.
Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 2.0 cu/ft with one 4" diameter x 10" long port. Ported (or vented) enclosures provide better efficiency in the 40-50Hz range, and are suitable for use with small amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of sound quality at low frequencies (40Hz and below), and control.
Bandpass Box Volume: Infinity recommends a bandpass enclosure with an internal volume of 2.25 cu/ft. The enclosure has a sealed chamber volume of 1.0 cu/ft and a ported chamber volume of 1.25 cu/ft with two 4" diameter x 8" long ports. Bandpass enclosures often provide the most output available from any amplifier and subwoofer combination at the expense of sonic accuracy. If sheer SPL is desired most, a bandpass enclosure is recommended.
The Infinity 1262w replaces these items
- textured polypropylene cone with urethane surround
- power range: 50-250 watts RMS (125 watts RMS per coil)
- frequency response: 36-300 Hz
- Dual 4-ohm voice coils
- polypropylene cone
- large-roll rubber surround
Q Crutchfield asked: Why did you buy this?
4 questions already asked