About the Infinity Kappa 32.7cf
Infinity Kappa speakers incorporate the latest technology to provide you with outstanding sound reproduction. And, thanks to Infinity's innovative low-impedance design, they're built for high efficiency as well.
The Kappa 32.7cf 3-1/2" speaker features a super-stiff woofer cone to minimize flexing that can cause distortion. The Plus One cone offers a larger surface area than other 3-1/2" speakers, for improved midrange output and efficiency. The woofer's powerful, compact neodymium magnets weigh much less than traditional magnets a nice feature when you're trying to save weight in your high-performance vehicle.
Infinity uses the same type of tweeter found in many of their popular home speakers, so you'll hear the music the way it was recorded, with minimal coloration or distortion.
The computer-optimized outboard crossover employs audiophile-grade components to separate highs and lows so that the woofer and tweeter work together perfectly. A tweeter level control allows you to tailor the tweeter's response for perfect balance.
Important Note: These Infinity speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with all factory and aftermarket stereos.
Priced per pair
Product highlights:
- 2-way 3-1/2" speakers (pair)
- 2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos)
- Plus One woven-glass-fiber woofer cone with rubber surround
- 3/4" M.M.D. dome tweeter
- computer-optimized outboard crossovers with tweeter level control
- power range: 2-35 watts RMS (105 watts peak power)
- frequency response: 85-25,000 Hz
- sensitivity: 95 dB
- top-mount depth: 1-11/16"
- warranty: 3 years
- MFR # KAPPA32.7cf
What's in the box:
Infinity Kappa 32.7cf owner's manual
- Two 2-way speakers
- 2 In-line crossovers (each crossover has 11" input leads and 18" output leads)
- Instructions
- Warranty card
Customer reviews for Infinity Kappa 32.7cf
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Kappa 32.7cf
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 2 | |
Tweeter Composition | M.M.D. | |
Woofer Composition | Woven-glass-fiber | |
Woofer Surround | Rubber | |
Parts Warranty | 3 Years | |
Labor Warranty | 3 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 95 | |
Frequency Response | 85 - 25k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 35 | |
Peak Power Handling (Watts) | 105 | |
Top-mount Depth (Inches) | 1 11/16 | |
Bottom-mount Depth (Inches) | 1 11/16 | |
Cutout Diameter or Length (inches) | 3 1/2 | |
Mounting Height (Inches) | 0.499 | |
Frame Width | 3.429 | |
Frame Length | 3.429 |
Product Research
Features
Plus One Woven-Glass-Fiber Woofer Cones: The Plus One speakers use cones approximately 30% larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency.
Woven-Glass-Fiber Woofer Cones: This woven-glass-fiber material is very light and extremely stiff, minimizing cone flex. This results in very low distortion and improved clarity.
Motor Structure: The new Kappas use a Neodymium motor structure with an integrated heat sink. This design provides a massive amount of energy while minimizing mounting depth and magnet diameter. The integrated heat sink cools the motor structure efficiently, thus increasing power handling while reducing distortion.
3/4" Edge Driven MMD Dome Tweeters: Each speaker has a 3/4" Edge-driven MMD (Metal Matrix Diaphragm) dome tweeter. The benefit is increased power handling and reduced distortion at high output. This technology also allows for better integration with the mid/woofer. The tweeter has an adjustable output level, +0 dB (flat) and +3 dB.
SLI High-Output Design: This high output 2 ohm design extracts every watt from today's amplifiers and hi powered receivers, increasing overall system output and efficiency (relative to 4 ohm speakers).
Crossovers: Kappa speakers include computer-optimized, voice-matched crossovers, using audiophile quality air core inductors and polypropylene capacitors.
Crossover Connections: Each crossover has a 11" input lead terminated with bare wire and two 18" output leads, one for the woofer and one for the tweeter, terminated with female quick-slides. The female quick-slides connect to the male quick-slides on the speaker. The positive terminal on the woofer is 0.205" and the negative is 0.188". The positive terminal on the tweeter is 0.203" and the negative is 0.113".
Crossover Dimensions: L=3.577", W=1.737", H=1.074"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
You get what you pay for. These speakers are for real. if you are looking for a smooth sound for your dash check these out you will be like wow!
Rodney from mid west