About the Infinity Reference 5010cs
It's easier than ever to add the great sound of the Infinity Reference 5010cs 5-1/4" component speaker system to your vehicle. Infinity's Starfish mounting bracket allows the system's tweeters to be installed in most factory tweeter locations. If you don't have factory tweeters, the ingenious I-mount system helps you custom install the tweeters in almost any location.
No matter where you mount them, you'll appreciate the crisp response of silk dome tweeters. They supply plenty of detail without fatiguing the ears a nice feature when you've got a long road trip in mind.
And you'll enjoy the rest of your music as well. The Plus One® woofer cones are designed with more surface area than other 5-1/4" woofers, for deeper, cleaner bass response. The outboard crossover networks direct the highs and lows to the proper drivers with real precision, so your music always sounds natural and full.
No doubt about it, the intelligent design of Infinity Reference component systems will make a difference you can hear in your music.
Priced per system
- component speaker system includes woofers, tweeters, and crossovers
- 5-1/4" Plus One polypropylene woofer with rubber surround
- 1" silk dome tweeter with multiple mounting options
- Starfish mounting bracket for easier tweeter installation in factory locations
- 2-way external crossover network (18 dB/octave, 3,500 Hz high-pass and low-pass)
- power range: 2-75 watts RMS (225 watts peak power)
- frequency response: 67-21,000 Hz
- sensitivity: 91 dB
- top-mount depth: 2-3/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # REF5010CS
What's in the box:
- 2 Woofers
- 2 Grilles
- 2 Grille frames
- 2 Crossovers
- 2 Tweeters (each tweeter has attached 5" speaker leads)
- 2 Flush-mount cups
- 2 Threaded flush-mount adapters
- 2 Plastic locking nuts
- 2 Surface-mount cups
- 2 Starfish tweeter mounts
- Twelve 1" self-tapping screws
- Four 3/4" self-tapping screws
- Four 5/8" self-tapping screws
- Four 3/8" self-tapping screws
- 8 Speed clips
- 2 Washers
- 2 Nuts
- Warranty card
Infinity Reference 5010cs reviews
Thanks for submitting your review
More details on the Infinity Reference 5010cs
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||91|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||67 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||225|
|Top-mount Depth (Inches)||2 1/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 3/4|
|Mounting Height (Inches)||0.297|
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.
Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Tweeter Material: Each tweeter features a 1" edge-driven silk dome for smooth, accurate highs.
Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:
- I-Mount Tweeter Mounting
System: The tweeters can be surface- or flush-mounted with Infinity's innovative I-Mount system:
- Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
- Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
- Starfish Mounting
Brackets: The Starfish mounting
brackets allow the tweeters to be installed in factory locations behind the
- Surface Mount (behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
- Flush Mount (behind grille panel): Once the Starfish bracket is trimmed, it is dropped into the cutout in the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
- Bottom Mount (to grille panel): Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
- Flush Mount (in-dash location): Once the Starfish bracket is trimmed, it is dropped into the cutout in the dash. Then, the tweeter is inserted into the bracket and locked into place.
Tweeter Mounting Dimensions:
|I-Mount Surface Mount||I-Mount Flush Mount||Starfish Surface Mount (behind grille panel)||Starfish Flush Mount (behind grille panel)||Starfish Bottom Mount (to grille panel)||Starfish Flush Mount (in-dash location)|
|Depth||0.517" (screw depth)||0.875"||0.479"||0.438"||1.009"||0.913"|
2-Way Crossovers: These speakers include computer-optimized, voice-matched crossovers. Each crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and an 18dB/octave, 3.5kHz low-pass network for the woofer.
Selectable Tweeter Output Level: Each crossover allows you to select the tweeter output level according to system requirements and personal preference. The tweeter level may be set to "-3 dB" or "0 dB."
Crossover Connections: The crossover inputs and outputs are gold-plated screw terminals.
Mounting: There are two mounting holes in the base of each crossover.
Crossover Dimensions: W=3.174", H=1.393", D=4.315"
The Infinity Reference 5010cs replaces these items