About the Infinity Reference 6032si
Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.
Infinity Reference 6032si 6-3/4" speakers feature a Plus One+ woofer design that maximizes cone surface area so you enjoy richer, deeper lows. Large textile dome tweeters project smooth, clean highs, and they're equipped with a level control so you can fine-tune the degree of brightness to match your taste. Large voice coils in the edge-driven textile dome tweeters allow for high power-handling. Grilles are not included factory grilles are appropriate for most installations, but optional grilles are available.
Infinity makes sure that your installation stays stress-free by including Intermount III, a proprietary mounting system that allows you to install these 6-3/4" speakers in a variety of 6" to 6-3/4" factory locations. And since these speakers sport a special shallow profile design, they'll fit many popular vehicles.
Note: Infinity describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Important Note: These Infinity Reference speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.
Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.
Priced per pair
- 2-way car speakers for 6-1/2" and 6-3/4" locations (pair)
- Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
- 1" edge-driven, textile dome tweeter
- Intermount III mounting system for fit in 6-3/4" openings
- True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
- compatible with virtually all factory or aftermarket car stereos
- power range: 2-50 watts RMS (150 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93 dB
- top-mount depth: 1-15/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 6032si
What's in the box:
- Two 2-way speakers
- 2 Plastic mounting rings (Chrysler/GM)
- 2 Adhesive backed foam gaskets
- 2 Adhesive backed foam strips
- Warranty information
Infinity Reference 6032si reviews
Thanks for submitting your review
More details on the Infinity Reference 6032si
Features & specs
|Tweeter Design||Edge-driven Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||93|
|Frequency Response||53 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||2|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 15/16|
|Mounting Height (Inches)||0.412|
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.
Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Textile Dome Tweeters: Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
Mounting: Out of the box, the 6032si speakers easily fit many 6-3/4 applications. The cutout required for the speaker (approximately 4.9") also allows it to drop into many standard 6-1/2 applications, but the speaker's bolt pattern doesn't fit standard 3-hole 6-1/2 installations. The included mounting rings are used for standard 6-1/2, as well as many GM and Chrysler 6-3/4 applications. Screws to attach the speakers to the mounting rings are not included (self-tapping screws, 4mm diameter x 7mm length are a good fit).
True Four Ohm Impedance Technology: The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier.
The Infinity Reference 6032si replaces these items
For 6-1/2" and 6-3/4" openings
- Plus One+ polypropylene woofer with hi-roll rubber surround
- 1" textile edge-driven dome tweeter
- 2-50 watts RMS power range
2 questions already asked