About the Infinity Kappa 692.5i
The Infinity Kappa 692.5i 6"x9" speakers set an exceptional standard for high-fidelity sound. An oversized, Plus One Ceramic Metal Matrix Diaphragm (C.M.M.D.) woofer cone features a lightweight aluminum cone bonded to layers of ceramic forming a highly durable driver that delivers accurate performance with minimal distortion.
The cast-polymer basket and hi-roll rubber surround combine to virtually eliminate unwanted resonances from "coloring" low-frequency output. You may direct the flow of high frequencies from the Unipivot C.M.M.D. tweeter to achieve optimum stereo imaging. Computer-optimized crossovers (18 dB/octave, 3,500 Hz), customized to match the 692.5i, prevent the drivers from playing notes outside their ranges.
Priced per pair
- Plus One C.M.M.D. woofer cone is 30% larger than other speakers of this size, ensuring strong bass response
- high-roll rubber surround allows greater woofer movement
- 1" Unipivot C.M.M.D. dome tweeter may be rotated up to 355° for improved imaging
- 2-way external crossovers (18 dB/octave, 3,500 Hz high- and low-pass)
- sensitivity 90 dB
- frequency response 35-21,000 Hz
- recommended power range 2-110 watts RMS
- peak power handling 330 watts
- top-mount depth 3-1/4"
- 3-year warranty
- MFR # KAPPA692.5I
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille rings
- 2 In-line crossovers
- 8 Self-tapping screws
- 8 Speed clips
- Warranty/registration card
Infinity Kappa 692.5i reviews
Thanks for submitting your review
More details on the Infinity Kappa 692.5i
Features & specs
|Tweeter Design||1" Dome|
|Woofer Surround||Hi-roll rubber|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||90|
|Frequency Response||35 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||110|
|Peak Power Handling (Watts)||330|
|Top-mount Depth (Inches)||3 1/4|
|Bottom-mount Depth (Inches)||3 5/8|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.398|
Ceramic Metal Matrix Diaphragm (C.M.M.D.): Infinity's C.M.M.D. technology delivers accurate performance with dramatically reduced distortion for incredibly lifelike sound. Additionally, the C.M.M.D. drivers can withstand extreme temperatures, moisture, humidity and sunlight.
C.M.M.D. Plus One Woofer Cones: These speakers use cones approximately 30% larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency. In addition, the C.M.M.D. cones virtually eliminate coloration due to cone flexing, resulting in less distortion and superior accuracy.
Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
UniPivot C.M.M.D. Dome Tweeters: Each speaker has a 1" C.M.M.D. dome tweeter that offers superior stiffness and damping compared to traditional metal domes. The UniPivot tweeter is angled (non-adjustable) and may be turned up to 355 degrees for optimum imaging and in-car frequency response. It is not made to turn 360 degrees. If the tweeter is turned 360 degrees or more, it will be damaged.
2-Way Crossovers: These speakers include computer-optimized, voice-matched crossovers. Each crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and an 18dB/octave, 3.5kHz low-pass network for the woofer.
Crossover Connections: Each crossover has an 11" input lead terminated with bare wire and two 18" output leads, one for the woofer and one for the tweeter, terminated with female quick-slides. The positive woofer lead has a 0.205" female quick-slide and the negative woofer lead has a 0.110" female quick-slide. The positive tweeter lead has a 0.250" female quick-slide and the negative tweeter lead has a 0.187" female quick-slide. These quick-slides connect directly to the woofer and tweeter terminals on each speaker.
Crossover Dimensions: L=3.458", W=1.734", H=1.087"
The Infinity Kappa 692.5i replaces these items