Contact us
Close contact box

Infinity Kappa 693.11i

6"x9" 3-way car speaker

Item # 10869311I

Infinity's Kappa Series 693.11i 6"x9" speakers continue in the tradition of this legendary line of...

Find what Fits your car

Infinity's Kappa Series 693.11i 6"x9" speakers continue in the tradition of this legendary line of...

Ziggy
Need help?
Contact our Virginia-based experts.
Discontinued item
5 questions - 8 answers

Item # 10869311I

Ziggy
Need help?
Contact our Virginia-based experts.

About the Infinity Kappa 693.11i

Legendary sound

Infinity's Kappa Series 693.11i 6"x9" speakers continue in the tradition of this legendary line of speakers, offering rugged construction and impressive sound quality. Once installed, these speakers will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.
Infinity Kappa 693.11i

Legendary sound

Infinity's Kappa Series 693.11i 6"x9" speakers continue in the tradition of this legendary line of speakers, offering rugged construction and impressive sound quality. Once installed, these speakers will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.

Large soft dome tweeters

If you're looking for natural-sounding high frequencies, Infinity uses edge-driven 1" soft dome tweeters in this speaker. The "edge-driven" design creates a larger tweeter that handles more power and delivers smooth response way down into midrange frequencies not covered by smaller "W"-shaped domes. Infinity adds 1" super tweeters for extended high-frequency detail, producing a more clearly defined soundstage where you can picture the placement of every instrument. A level control switch allows you to adjust the brightness to your taste.

Glass fiber woofer with Plus One+ technology

If you like bass, the Kappa glass fiber woofer holds its shape when the power's cranked up, so you still get punchy and defined bass. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive this woofer. Infinity's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you more surface area than with most comparable speakers. A bigger cone means more bass to complement the superior high-frequency response.

Great for any system

These 2-ohm speakers are sensitive enough that you can power them with an aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp — up to 110 watts RMS. Grilles are included.

READ LESS

Product highlights:

  • 6"x9" 3-way car speakers
  • Plus One+ glass-fiber woofer cone with hi-roll rubber surround
  • 1" edge-driven, soft dome tweeter and 1" super tweeter
  • 2-ohm impedance
  • power range: 5-110 watts RMS (330 watts peak power)
  • frequency response: 35-30,000 Hz
  • sensitivity: 96 dB
  • top-mount depth: 3-3/16"
  • grilles included
  • warranty: 3 years
  • Our 60-day money-back guarantee
  • MFR # 693.11i

What's in the box:

  • Two 3-way speakers
  • 2 Bottom mount adapter rings
  • 2 Grilles
  • 2 Grille rings
  • Eight 1-3/8" Self-tapping screws
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • 2 Adhesive backed Infinity logo badges
  • Instructions

Customer reviews

Loading reviews...

Infinity Kappa 693.11i reviews

Average review:

52 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Infinity Kappa 693.11i

Pat M.

Features & specs

General
Speaker Size 6X9
Design 3-way
Tweeter Design 1" Dome
Impedance (Ohms) 2
Tweeter Composition Textile
Woofer Composition Formed glass fiber
Woofer Surround Rubber
Parts Warranty 3 Years
Labor Warranty 3 Years
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 96
Frequency Response 35 - 30k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 110
Peak Power Handling (Watts) 330
Top-mount Depth (Inches) 3 3/16
Bottom-mount Depth (Inches) 3 7/8
Cutout Diameter or Length (inches) 0
The Infinity Kappa 693.11i replaces these items:

Product Research

Features

Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and a significant increase in efficiency.

Formed Glass Fiber Woofer Cones: This formed glass fiber material is very light and extremely stiff, minimizing cone flex. This results in very low distortion and improved clarity.

iCGM frames: The Kappa series speaker baskets are made of composite Injected Carbon Glass Matrix (iCGM). iCGM is lighter and stronger than stamped steel; it retains its shape, even when mounted on uneven surfaces (common in car mounting locations), plus offers exceptional damping of any resonances.

Edge Driven Dome Tweeters: Each speaker has a 1" Edge-driven textile soft dome tweeter. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity. The tweeter also has an adjustable output level, +0 dB (flat) and +3 dB.

Super Tweeter: The Kappa 693.11 adds a 1/2" super tweeter to reinforce the high frequencies and keep pace with the larger cone of the 6" x 9" woofer.

High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.

Terminals: The input terminals are gold-plated set screws that will accept up to 12 gauge bare wire.

Power Handling: Although Infinity lists the RMS power handling as 110 watts, they also list the recommended power range as 5-200 watts RMS. We've opted to list the more conservative 110 watt RMS figure on the specifications page.

Loading accessories...

Customer Q&A

5 questions already asked

Q
These do not fit the opening on my 2007 Dodge Ram 2500. I modified one opening but it hit the windo regulator gear. Is there a bracket for these to help with clearance?
[ Shawn  Apr 12, 2017 ]
2 answers
A
What kind of response is this? Basically are you saying your fitment guide is useless? Sure sounds that way
[ Steve  Dec 25, 2017 ]
A
Thanks for your question. There is nothing vehicle or speaker specific. Check out this universal liftring at the link below. No guarantees and modifications may be needed. Looking at the "Details" tab you will see the measurements and specifications. Hope this helps. https://www.crutchfield.com/p_134SB69/Scosche-SB69.html
[ Kenny  Apr 14, 2017 ]  Staff
Q
Which amp should i buy with these if i already have the front pair of kappas?
[ Justin  Jan 13, 2017 ]
1 answer
A
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Jan 13, 2017 ]  Staff
Q
I have Pioneer 5 ways running on a Pioneer 5 channel amp running at 4 ohms i want to change them for these kappas but I see they 2 ohms do i have to rewire them to run at 2 ohms ?
[ Eric  Jul 27, 2016 ]
2 answers
A
If your 5 channel is 2 ohm stable it will be fine. Just hook them up the same
[ RUSSELL  Oct 02, 2018 ]
A
Eric H. I'm sorry I can't help you. I bought everything from Crutchfield then had someone else install it all. All I know is I'm running at 2 ohms. Also they sound amazing. Sorry again I was less than useless in answering your question.
[ CHRISTOPHER  Jul 27, 2016 ]
Q
Can these be bottom mounted or is the plus1 feature not going to allow this positioning? Thanks guys
[ Jai  Jan 12, 2016 ]
2 answers
A
I bottom mounted the speakers in my car you may have to buy screws& nuts for mounting depending on your vehicle.
[ Chris  Jan 13, 2016 ]
A
I don't think these can be bottom mounted due to the rubber surround, its very close to the edge of the frame.
[ dipstick  Jan 13, 2016 ]
Q
Why won't this fit my car? 2011 chrysler 300c with 10 speaker alpine system. I am thinking about putting them in the rear deck. I also know that 6x9s are in the front door, you don't list 6x9s for front door. Why is that?
[ Patrick  Jan 26, 2014 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on why this will not fit.
[ Jeff  Jan 26, 2014 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP