About the Infinity Kappa 53XF
Infinity designed and built their Kappa Series for audiophile tastes. These Kappa 53XF 5-1/4" car speakers benefit from a refined design, Infinity's proprietary technology, and premium materials to deliver uncompromised audio quality. Plus, Infinity has added convenient features for getting just the right sound for your ride.
Edge-driven silk dome tweeters
Infinity employs an edge-driven design in their silk dome tweeters for a smoother, more open response and minimal distortion at high volume. The UniPivot angled tweeter design means you can rotate each tweeter up to 270° to aim it toward your ears, so you'll enjoy excellent stereo imaging even if the speakers are mounted way down low in your doors. Each tweeter also features a level control button so you can adjust the brightness to your taste.
Plus One+ woofer technology
Kappa's glass fiber woofer will hold its shape when the power's cranked up, so you still get punchy and defined bass. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive this woofer either. Infinity's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you lots of surface area — and a bigger cone means more bass to complement the superior high-frequency response.
Awesome power handling, no matter the system
These 3-ohm speakers boast ultra-high sensitivity so that you can power them with a factory radio or aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp. Either way, these speakers' low impedance safely takes advantage of every watt of power available for exceptional performance. Enjoy Kappa sound quality at any volume.
Grilles are not included; the factory grilles should be suitable for most applications.
- 5-1/4" 2-way car speakers
- Plus One+ glass-fiber woofer cone with hi-roll rubber surround
- edge-driven silk dome tweeter
- angled UniPivot tweeter can be rotated 270° after installation
- push-button tweeter output level control (0 dB, -3 dB)
- 3-ohm impedance
- grilles not included
- handles up to 60 watts RMS (180 watts peak power)
- frequency response: 55-40,000 Hz
- sensitivity: 93 dB at 2.83 volts
- top--mount depth: 2-1/4"
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # INFSPKKA53XFAM
What's in the box:
- Two 2-way speakers
- Eight 1-3/8" Screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- 2 Adhesive backed Infinity logo badges
- Template on box
- Installation manual
Infinity Kappa 53XF reviews
Thanks for submitting your review
More details on the Infinity Kappa 53XF
Features & specs
|Speaker Size||5 1/4|
|Tweeter Design||Edge-Driven Dome|
|Woofer Composition||Glass Fiber|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||93|
|Frequency Response||55 - 40k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||180|
|Top-mount Depth (Inches)||2 1/4|
|Bottom-mount Depth (Inches)||2 7/16|
|Cutout Diameter or Length (inches)||4 11/16|
|Mounting Height (Inches)||0.625|
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
Edge Driven Dome Tweeters: Each speaker has an edge-driven silk dome tweeter. Edge-driven tweeters have better dispersion characteristics and allow for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity. The tweeter also has an output level switch; choose +0 dB (flat) or -3 dB.
UniPivot Tweeter: The tweeter is angled and can be rotated about 315° after installation. This allows you to direct the tweeters toward the listeners, very useful for speakers mounted low in a door.
High-Output Design: The high output 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4Ω speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 3Ω load.
Terminals: The input terminals are set screws that will accept up to 12 gauge bare wire.
2 questions already asked