About the Infinity KAPPA1050MAM
Big bass and cool LED lights
Big bass and cool LED lights
This marine-rated Infinity Kappa 10" marine subwoofer will boost your bass and brighten up your boat. Made for outdoor use, this rugged sub can handle up to 300 watts RMS and look great doing it. The attractive multi-color RGB LED lighting will add style and functionality to any vessel.
This powerful sub gives you versatility, too, thanks to Infinity's innovative dual-impedance switch that lets you choose a 2- or 4-ohm load impedance option. The “SSI” system lets you reconfigure your sub at the flip of a switch – something you can't do with ordinary marine subwoofers – so it always fit in your system as it evolves.
Pick a color
When you buy Infinity Kappa speakers, great sound is a given. But this subwoofer also give you attractive RGB LED lighting that'll add style to your boat. Seven cool colors are available out of the box, but with an external lighting controller (sold separately), you can create unique colors that suit your boat and your style.
Ready for the outdoors
Marine audio gear lives a pretty harsh life, with sun, spray, salt, and extreme temperatures, plus the occasional fish that gets loose on the deck. This Infinity sub is ready for all of it, with a one-piece polymer basket, marine-ready componentry, and a sealed, UV-resistant grille that will stand up to spray and punishing sunlight for years to come.
Available in Titanium or White.
- 10" marine subwoofer with multi-color RGB LED lights
- choose 2- or 4-ohm impedance with the flip of a switch
- polypropylene cone with rubber surround
- one-piece cast polymer basket
- IPX5 rated for water resistance
- available in Titanium or White
- power handling: 300 watts RMS (900 watts peak power)
- sensitivity: 89 dB at 2.83 volts
- frequency response: 20-2000 Hz
- impedance: 2 ohms/4 ohms
- mounting depth: 4.85"
- cutout diameter: 9.26"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KAPPA1050MAM
What's in the box:
- One marine subwoofer with fixed Titanium (color) polymer grille
- 6" LED Harness
- Six 1-3/8" Stainless-steel screws (3mm Allen head)
- 6 Stainless-steel speed clips
- 3mm Allen wrench
- Adhesive backed foam gasket
- Installation manual
Thanks for submitting your review
More details on the Infinity KAPPA1050MAM
LED Illumination: Integrated into each grille are red/green/blue LED assemblies, to create a glow on the woofer cone. A 12 volt power supply is needed to turn the LEDs on; depending on what combination of LED wires is connected, they light red, green, blue, yellow, purple, aquamarine, or white. A 4-wire pigtail (14" long) is provided for supplying power to the built-in LEDs.
Switch-Selectable Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.) The power handling is the same for either setting; 300 watts RMS/900 watts peak.