About the Infinity Primus PR8612cf
Treat yourself to an upgrade
Treat yourself to an upgrade
When the thrill of owning a new (or new-to-you) car wears off, there's one sure-fire way to bring the excitement back to your drive. Install Infinity's Primus PR8612cf 6"x8" 2-way speakers in your doors and say goodbye to the uninspired vocals, muddy cymbals, and flabby bass of your factory sound. Lifelike vocals, crisp cymbals, and well-defined bass await you. What new playlists will you create to put these awesome speakers to the test?
Edge-driven tweeter design
Infinity employs an edge-driven design in their soft dome tweeters for a smoother, more open response and minimal distortion at high volume. Prepare for a more clearly defined soundstage as the details in your music come alive.
Famous Plus One+ technology
This Primus polypropylene woofer delivers solid, punchy bass, thanks to Infinity's proprietary Plus One+ woofer design. Infinity extends the cone right up to the edge of the basket, giving you lots of surface area — and a bigger cone means more bass when your music needs it.
Make the most of your power
Infinity's special "true 4-ohm architecture" uses a low-impedance voice coil to safely draw extra power out of your factory radio, aftermarket stereo, or an external amplifier, so you'll get a stronger clearer sound.
Grilles are not included; the factory grilles should be suitable for most applications.
- 6"x8" 2-way car speakers
- Plus One+ polypropylene woofer cone with hi-roll rubber surround
- edge-driven, textile dome tweeter
- 2.7-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
- handles up to 55 watts RMS (165 watts peak power)
- frequency response: 49-20,000 Hz
- sensitivity: 88.5 dB at 2.83 volts
- top-mount depth: 2-5/16"
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # PR8612CFAM
What's in the box:
- Two 2-way speakers
- 2 Adhesive backed foam gaskets
- Template on box
- Installation manual
Infinity Primus PR8612cf reviews
Thanks for submitting your review
More details on the Infinity Primus PR8612cf
Features & specs
|Tweeter Design||Edge-Driven Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||88.5|
|Frequency Response||49 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||55|
|Peak Power Handling (Watts)||165|
|Top-mount Depth (Inches)||2 7/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.324|
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
Impedance: The Primus Series speakers feature 2.7Ω voice coils to compensate for the high in-line resistance of small gauge factory wiring and extract every watt from the factory receiver, increasing overall system output and efficiency (relative to 4-ohm speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers capable of powering a lower impedance load.
Mounting Applications: Infinity describes these speakers as 6x8, but they also fit many 5x7 applications. Please enter your vehicle information to confirm fit.
The Infinity Primus PR8612cf replaces these items
1 question already asked