About the Infinity Reference REF-6522ix
It's all in the details
It's all in the details
Hear the details you've been missing in your car's sound system. Infinity's Reference Series REF-6522cfx 6-1/2" speakers offer exceptional clarity, thanks to 1" edge-driven textile tweeters that bring out all the details in your music without sounding harsh.
Big woofer = big sound
The tough polypropylene woofer with its durable hi-roll rubber surround delivers surprisingly strong performance. Each Plus One+ woofer sports a significantly larger cone than speakers of similar size, adding plenty of punch to the speaker's smooth and accurate highs.
Perfect for any power supply
You can power these speakers with up to 60 watts of RMS power — they'll work well with an external amplifier, but they're also a good match for a factory radio or aftermarket stereo. Plus, these 3-ohm speakers combine with the speaker wire in your vehicle so your car stereo sees actual 4-ohm impedance, so you get a little more volume out of your system.
- 6-1/2" 2-way car speakers
- Plus One+ polypropylene woofer cone with hi-roll rubber surround
- 1" edge-driven, textile dome tweeter
- included brackets allow mounting in a variety of 6-3/4" and 6-1/2" openings
- True Four Ohm Impedance technology: speaker's 3-ohm impedance combines with speaker wire impedance for a 4-ohm load
- compatible with virtually all factory or aftermarket car stereos
- handles up to 60 watts RMS (180 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93 dB
- top-mount depth: 2-1/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # REF-6522ix
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- 2 Plastic mounting rings (Chrysler/GM/etc.)
- Eight 1" Screws
- Eight 3/8" Screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- Instruction manual
- Template on box
Infinity Reference REF-6522ix reviews
Thanks for submitting your review
More details on the Infinity Reference REF-6522ix
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||1" Edge-Driven Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||93|
|Frequency Response||53 - 21k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||180|
|Top-mount Depth (Inches)||2 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/8|
|Mounting Height (Inches)||0.705|
Plus One+ Woofer Cones: Each speaker uses a larger cone than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and an increase in efficiency.
Angled Tweeter: The tweeters are mounted at an angle (fixed), so they can be directed toward the listeners to improve imaging.
Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output to +3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
High-Output Design: The 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring, extracting more power from factory (or aftermarket) receivers. This results in clearer, richer sound for the listener.
Mounting: Without an adapter, the 6522ix speakers fit standard 6-3/4" applications. Given their required cutout, they will also fit 6-1/2" applications without an adapter, but new screw holes must be drilled. Using the included adapter brackets they can be mounted in a variety of 6-1/2" and 6-3/4" applications, without any modification.
Q Crutchfield asked: Why did you buy this?
2 questions already asked