About the JBL Club 622
The fun of JBL
The fun of JBL
Move on from factory sound with JBL's vibrant Club Series speakers. These Club 622 6-1/2" coaxial speakers feature UV-resistant polypropylene woofers that deliver solid performance even under the most extreme environmental conditions.
A step up from factory speakers
JBL's patented Plus One™ woofer structure extends the surface area of the cone to give you a better low-frequency experience than other speakers this size. And an edge-driven silk dome tweeter expands the high-frequency range, so you'll hear musical details that you never heard from your old speakers.
A match for any system
The Club 622's low-impedance design safely draws more power from your car stereo to give your music extra punch, but you'll get even better results feeding them power from an outboard amp.
- 6-1/2" 2-way speakers (pair)
- polypropylene Plus One woofer cone
- edge-driven silk dome tweeter
- handles up to 60 watts RMS (180 watts peak power)
- frequency response: 48-21,000 Hz
- impedance: 3 ohms
- sensitivity: 93 dB at 2.83 volts
- top-mount depth: 2-1/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # SPKCB622AM
What's in the box:
- Two 2-way speakers
- 2 Mounting brackets (includes GM/Chrysler)
- 2 Grilles
- 2 Grille rings
- 2 JBL Grille badges
- Eight 1" Screws
- Eight 1/2" Screws
- 8 Speed clips
- 2 Adhesive backed foam gasket strips
- Installation manual
- 2 JBL Stickers
- Specs and Template on box
Thanks for submitting your review
More details on the JBL Club 622
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||Edge-Driven Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||93|
|Frequency Response||48 - 21k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||180|
|Top-mount Depth (Inches)||2 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/8|
|Mounting Height (Inches)||0.718|
Plus One+ Woofer Cones: Each speaker uses a cone larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and an increase in efficiency.
High-Output Design: The 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring, extracting more power from factory (or aftermarket) receivers. This results in clearer, richer sound for the listener.
Tweeter Output: A switch on each tweeter housing allows you to adjust the tweeter output level; choose 0 dB (flat) or +3 dB.
Mounting: Without an adapter, the Club 622 speakers fit standard 6¾" applications. Given their required cutout, they will also fit many 6½" applications without an adapter, but new screw holes must be drilled. Using the included adapter brackets, they can be mounted in a wide variety of 6½" and 6¾" applications, without any modification. (Using the adapter brackets adds approximately ¼" to the speaker's mounting height.) Please enter your vehicle information to confirm fit.
The JBL Club 622 replaces these items