About the JBL Club 6420
The well-rounded speaker
The well-rounded speaker
It's simple. Your factory speakers are getting you down. JBL's Club Series speakers are the clear solution. JBL equipped these Club 6420 4"x6" coaxial speakers with UV-resistant polypropylene woofers for stellar performance even under the stickiest (or chilliest) environmental conditions — after all, your car door isn't the most forgiving place to reside.
This Club Series speaker's low profile allows it to fit in more vehicles.
The speaker's patented Plus One™ woofer structure extends the surface area of the cone to give you a better midbass experience than other speakers this size. And a PEI balanced dome tweeter expands the high-frequency range, so you'll hear musical details that you never heard from your old speakers.
A match for any system
The Club 6420's low-impedance design safely draws more power from your car stereo to give your music extra punch, but you'll get even better results feeding them power from an outboard amp.
Grilles are not included; the factory grilles should be suitable for most applications.
- 4"x6" 2-way speakers (pair)
- polypropylene Plus One woofer cone
- PEI balanced dome tweeter
- handles up to 25 watts RMS (75 watts peak power)
- frequency response: 75-20,000 Hz
- impedance: 3 ohms
- sensitivity: 87.5 dB
- top-mount depth: 1-3/4"
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CLUB 6420AM
What's in the box:
- Two 2-way speakers
- 2 Adhesive backed foam gasket strips
- Instruction manual
- 2 JBL window stickers
- Template on box
JBL Club 6420 reviews
I'm sending these back. Didn't mount them however hooked them up to hear them just on the factory radio in my Chevrolet Silverado extended cab. It didn't have any power on a very low volume and bass. So I didn't mount them put them back in the box.
0 of 1 found this helpful
More details on the JBL Club 6420
Features & specs
|Tweeter Design||Balanced Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87.5|
|Sensitivity at 2.83 volts||91|
|Frequency Response||75 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||35|
|Peak Power Handling (Watts)||105|
|Top-mount Depth (Inches)||1 3/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
Plus One+ Woofer Cones: Each speaker uses a cone larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and an increase in efficiency.
Tweeter: Each speaker has a PEI (Poly-Ether-Imide) balanced dome tweeter. PEI is a polymer film that produces a wide soundstage for superior imaging.
High-Output Design: The 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring, extracting more power from factory (or aftermarket) receivers. This results in clearer, richer sound for the listener.
Size Classification Note: The CLUB 6420 comes mounted on a standard 4x6 bracket (the most common 4x6 application). While the brackets appear to be easily removable, they are glued in place at four points around the perimeter (in addition to the four screws, which are obvious). With the brackets in place, the speakers fit many top mount standard 4x6 and metric 4x6 applications. If the adapters are removed, the speakers will fit additional top mount metric 4x6 applications, as well as some bottom mount metric 4x6 applications.