About the JBL Club 9600CAM
The well-rounded component system
The well-rounded component system
It's simple. Your factory speakers are getting you down. JBL's Club Series speakers are the clear solution. JBL equipped these Club 9600C 6"x9" component speakers with UV-resistant polypropylene woofers for stellar performance even under the stickiest (or chilliest) environmental conditions — after all, your car door isn't the most forgiving place to reside.
The speaker's patented Plus One™ woofer structure extends the surface area of the cone to give you a better bass experience than other speakers this size. The separate 3/4"edge-driven PEI tweeter expands the high-frequency range, so you'll hear musical details that you never heard from your old speakers.
A match for any system
The Club 9600C's low-impedance design safely draws more power from your car stereo to give your music extra punch, but you'll get even better results feeding them power from an outboard amp.
- component speaker system includes two woofers, two tweeters, and two crossovers
- 6"x9" polypropylene Plus One woofer cone
- 3/4" edge-driven soft dome tweeter
- handles up to 90 watts RMS (270 watts peak power)
- frequency response: 50-20,000 Hz
- impedance: 3 ohms
- sensitivity: 89.5 dB (93 dB at 2.83 volts)
- woofer top-mount depth: 3-1/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # Club 9600CAM
What's in the box:
- 2 Woofers
- 2 Tweeters (each has attached 6" speaker leads)
- 2 Crossovers
- 2 Bottom-mount woofer brackets
- 2 Woofer grilles
- 2 Tweeter flush-mount housings
- 2 Threaded flush-mount adapters
- 2 Plastic locking nuts
- 2 Tweeter surface-mount housings
- 2 Starfish tweeter mounts
- Eight 1-3/8" Screws
- Eight 1-1/8" Screws
- 8 Speed clips
- Six 5/8" Flat head screws
- 2 Washers
- 2 Nuts
- 2 Adhesive backed foam gaskets
- Instruction manual
- 2 JBL window stickers
- Template on box
Thanks for submitting your review
More details on the JBL Club 9600CAM
Features & specs
|Tweeter Design||3/4" Edge-Driven Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89.5|
|Sensitivity at 2.83 volts||93|
|Frequency Response||50 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||90|
|Peak Power Handling (Watts)||270|
|Top-mount Depth (Inches)||3 1/8|
|Bottom-mount Depth (Inches)||3 11/16|
|Cutout Diameter or Length (inches)||0|
Plus One+ Woofer Cones: Each speaker uses a larger cone than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and an increase in efficiency.
High-Output Design: The 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring, extracting more power from factory (or aftermarket) receivers. This results in clearer, richer sound for the listener.
Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:
- I-Mount: The tweeters can be surface-mounted
or flush-mounted with JBL's innovative I-Mount system:
- Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
- Flush Mount: Flush mounting uses the threaded flush-mount housing and plastic locking nut. Once a cutout is made, the tweeter is installed in the flush-mount adapter, then into the flush mount housing and inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
- Starfish Mounting Brackets: The Starfish
mounting brackets allow the tweeters to be installed in factory
locations behind the existing grilles:
- Bottom Mount: Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
- Surface Mount: Once the Starfish bracket is trimmed, it is screwed to the top of the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
- Flush Mount: There are two sets of tabs to flush mount the tweeter in the Starfish bracket, yielding different mounting dimensions. The upper tabs mount the tweeter completely below the opening and are glued in place. The lower mounting tabs are screwed in place and result in a mounting height just under ⅜". Once the bracket is mounted, the tweeter is inserted into the bracket and locked into place.
|I-Mount Surface Mount||I-Mount Flush Mount||Starfish Bottom Mount||Starfish Surface Mount||Starfish Flush Mount||Starfish Flush Mount (below mounting surface)|
|Depth||screw depth||0.784"||0.950"||screw depth||0.470"||0.572"|
Crossover Connections: The crossover inputs and outputs are screw terminals; they will accommodate bare wire or spade connectors up to 0.31" wide. There are two mounting holes in each crossover.
- Width: 2.46"
- Height: 1.085"
- Depth: 2.22" (plus wire)
The JBL Club 9600CAM replaces these items