About the JBL Stadium 82SSI
Quality and power
Quality and power
JBL has been building high-performance loudspeakers for many decades, so they know something about bass. They made their latest Stadium Series subwoofers to deliver powerful low-end punch and handle the high wattage of today's car amplifiers while giving you multiple options for installation.
Handles up to 400 watts RMS
The Stadium Series 82SSI 8" sub handles up to 400 watts RMS, and it's optimized for use in a very small sealed enclosure. JBL uses the airflow from the internal works to cool the 2" voice coil, so you can rely on this sub to stay cool in the heat of battle. The sturdy glass fiber/paper laminate cone and rubber surround will stand up to all the abuses of heavy bass output.
This Stadium Series subwoofer features SSI™ (Selectable Smart Impedance), a switch which lets you vary the sub's impedance from 2 ohms to 4 ohms to optimize its effectiveness. If you upgrade your amplifier or decide to add another sub, you'll be able to adjust the 82SSI's impedance to work best with your system.
The terminals on this Stadium Series sub will accept up to 10-gauge wire. You'll get full power from your amp even over long wire runs, so your subwoofer will have the juice you need. See what this JBL sub can do for your system.
- 8" high-performance car subwoofer
- glass fiber/paper laminate cone
- nitrile rubber surround
- stamped steel vented basket
- SSI (Selectable Smart Impedance): 2 or 4 ohms switchable
- power handling: 400 watts RMS (1200 watts peak)
- frequency response: 30-175 Hz
- sensitivity at 2.83V: 91 dB
- top-mount depth: 5.348"
- top-mount height: 0.575"
- sealed box volume: 0.5 cubic feet
- ported box volume: 1.0 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # JBLSUBSD82SSIAM
What's in the box:
- One 8" Subwoofer
- Screw cover trim ring
- Adhesive-backed foam gasket
- Eight 1" Screws
- Owner's manual (English/ French/ Spanish/ fifteen other languages)
JBL Stadium 82SSI reviews
Thanks for submitting your review
More details on the JBL Stadium 82SSI
Features & specs
|Impedance (Ohms)||2, 4|
|Cone Material||Glass Fiber over Paper|
|Ideal Sealed Box Volume (cubic feet)||0.5|
|Ideal Ported Box Volume (cubic feet)||1|
|Port diameter (inches)||3|
|Port length (inches)||10|
|Dual Voice Coil||No|
91 dB at 2.83 volts |
|Frequency Response||30 - 175 Hz|
|Max RMS Power Handling||400|
|Peak Power Handling (Watts)||1200|
|Top Mount Depth (inches)||5 3/8|
|Bottom Mount Depth (inches)||5 11/16|
|Cutout Diameter or Length (inches)||7 5/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.) The power handling is the same for either setting; 450 watts RMS/1350 watts peak.
Cone: The cone material is a composite of glass fiber over a paper pulp material. Adding the glass fiber layer increases cone rigidity to improve bass accuracy, while the pulp base improves the sub's damping characteristics.
Terminal: The spring terminals will accept bare wire up to 8 gauge.
Sealed Box: Infinity recommends a sealed enclosure with an internal volume of 0.5 ft³. Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: Infinity recommends a ported enclosure with an internal volume of 1.0 ft³ with one 3" diameter x 10" long port, resulting in a tuning frequency of 45 Hz. They also recommend using a sub-sonic filter. Ported enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power.
Free-air Mounting: In addition to being compatible with sealed and ported enclosures, the woofer can be used in free-air applications. A free-air subwoofer is designed to be mounted on a baffle board, which separates the front of the speaker from the back. For instance, you could mount this woofer to a board attached to the rear deck or placed in the trunk against the rear seat. The trunk acts as the enclosure housing the subwoofer. Because there is no specific volume of air to stiffen the suspension, the free-air power handling is approximately half that of the woofer in a box, in this case 200 watts RMS.
Thiele-Small Parameters: Because the woofer has two impedance settings, there are two sets of Thiele-Small parameters:
|DC Resistance (Ω)||2.26||4.71|
|Radiating Area (cm²)||226.98||226.98|
|Motor Force Factor (TM)||10.375||13.87|
2 questions already asked