Contact us
Close contact box

Jensen DUBS240

4" 2-way speakers

Item # 110DUBS240

Jensen has partnered with DUB magazine to create special-edition speakers that deliver robust sound with an...

Find what Fits your car

Jensen has partnered with DUB magazine to create special-edition speakers that deliver robust sound with an...

Need help?
Contact our Virginia-based experts.
Discontinued item
4 questions - 6 answers

Item # 110DUBS240

About the Jensen DUBS240

Big sound

Jensen has partnered with DUB magazine to create special-edition speakers that deliver robust sound with an affordable price tag. Install these DUBS240 4" speakers, and you'll notice a significant improvement in the sound of your car's system. The DUBS240's rigid, injected-molded polypropylene woofer cone helps make this speaker so responsive, delivering midrange musical details the way they were meant to be heard. Jensen rounds out this 2-way speaker with a silk dome tweeter that keeps every high note smooth and clean.
DUB 4"

Jensen incorporates the distinctive DUB look into the tweeter design, giving you a solid speaker that's stylish too.

Big sound

Jensen has partnered with DUB magazine to create special-edition speakers that deliver robust sound with an affordable price tag. Install these DUBS240 4" speakers, and you'll notice a significant improvement in the sound of your car's system. The DUBS240's rigid, injected-molded polypropylene woofer cone helps make this speaker so responsive, delivering midrange musical details the way they were meant to be heard. Jensen rounds out this 2-way speaker with a silk dome tweeter that keeps every high note smooth and clean.

The included DUB-designed grilles make a nice accessory for drivers looking to add a little flair to an average ride with a custom installation.

READ LESS

Highlights:

  • 2-way car speakers (pair)
  • 4" injection molded polypropylene woofer cone with NBR surround
  • 3/4" silk dome tweeter
  • power range: 2-45 watts RMS (180 watts peak power)
  • frequency range: 65-35,000 Hz
  • sensitivity: 87 dB
  • top-mount depth: 1-15/16"
  • impedance: 4 ohms
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # DUBS240

What's in the box:

  • Two 2-way speakers
  • 2 Grilles
  • Two 6" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other)
  • Eight 1-1/8" Self-tapping Allen head screws
  • 3mm Allen wrench
  • 8 Speed clips
  • 2 Strips of grille putty
  • Instruction manual (English/ Spanish/ French)
  • Template

Customer reviews

Loading reviews...

Jensen DUBS240 reviews

Average review:

52 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Jensen DUBS240

Pat M.

Features & specs

General
Speaker Size 4
Design 2-way
Tweeter Design 20mm Dome (3/4")
Impedance (Ohms) 4
Tweeter Composition Silk
Woofer Composition IMPP
Woofer Surround NBR
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 87
Sensitivity at 2.83 volts 90
Frequency Response 65 - 35k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 45
Peak Power Handling (Watts) 180
Top-mount Depth (Inches) 1 15/16
Bottom-mount Depth (Inches) 2 3/16
Cutout Diameter or Length (inches) 3 5/8

Product Research

Features

Woofers: The mica-reinforced Injection Molded Polypropylene (IMPP) woofer cones are rigid and lightweight. The Nitrile Butadiene Rubber (NBR) surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Dome Tweeter: Each speaker has a 20mm (3/4") silk dome tweeter with a neodymium magnet. Silk is lightweight and great for high frequency extension and efficiency. It is also designed for durability in the extreme automotive environment.

4/2 Hole Compatibility: Most 4" factory speakers use four mounting screws, however, in some vehicles, only two are used. The DUBs240's mounting tabs can be removed, allowing installation in 4-hole or 2-hole applications. Care should be taken handling the speaker after any tabs are removed because the broken edges may be sharp. Please check the Find What Fits Your Car application to confirm fit in your vehicle.

Loading accessories...

Customer Q&A

4 questions already asked

Q
Is it possible to get the thiele small parameters on these speakers? I have a .15ft3 box that I would like to mount two drivers in to make a portable Bluetooth speaker.
[ GOC4U  Mar 12, 2017 ]
1 answer
A
I'm afraid the Thiele Small parameters for the Jensen DUBS240 speakers is not provided. You may want to contact Jensen's support directly for more information--you can reach them by phone at 888-921-4088 or check their online support site: http://www.jensenmobile.com/ If you would like to discuss further, feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat.
[ Larry  Apr 02, 2017 ]  Staff
Q
What is the minimum power source required to power these and what is the smallest sized enclosure with measurements these will work in?
[ Evan1  Jan 09, 2017 ]
1 answer
A
I power these speakers with a 20 watt receiver. They are mounted in a 4 1/2 X 4 1/2 X 8 enclosure.
[ James  Jan 11, 2017 ]
Q
How far does the tweeter stick out? Can the tweeter grill be cut off for clearance to fit under a stock grill?
[ Jeff  Nov 15, 2016 ]
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Nov 15, 2016 ]  Staff
Q
What is the outside diameter of the grill?
[ Frank  Sep 11, 2016 ]
3 answers
A
I wish I could help, but I sold the car where i installed these, sorry
[ Andy  Sep 15, 2016 ]
A
I installed the speakers About 10 months ago and really don't remember. I can tell you what I had to do though. I had to drill 4 olds instead of using the three that was provided. The speaker's fit fine and sound really great.
[ Gregory  Sep 14, 2016 ]
A
I wish I could answer your question- I have not installed them yet, and I won't be anywhere near them until this weekend- i cant leave an email address on this response, so inquire again and I will get a measurement for you.
[ Charles  Sep 14, 2016 ]

Loading articles...

TOP