About the Kenwood BP-210
- Frequency response 28-170 Hz
- Handles up to 100 watts RMS
- 4-ohm impedance
- Sensitivity 87 dB (106 dB in car)
- 22"W x 13"H x 7-7/8"D
- 1-year warranty
What's in the box:
- 1 hatchback bandpass box w/ 2- 10" subwoofers
- Manual (English/French/Spanish)
- Warranty card
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Kenwood BP-210

Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Speakers Per Box | --- | |
Woofer Material | Poly | |
Enclosure Type | Bandpass | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 31-7/8 | |
Height (inches) | 14-1/2 | |
Depth (inches) | 13-7/8 | |
Connector Type | Spring Clips | |
Frequency Response | 26-150 Hz | |
Power Range (Watts RMS) | 100 | |
Maximum Wattage | 300 | |
Sensitivity | 88 dB | |
Impedance | 4 ohms | |
Parts Warranty | 1 YR | |
Labor Warranty | 1 YR |
Product Research
Enclosure
The box is made from high density particle board and covered with black
carpet.
There are four port openings located on the top of the box.
There are two spring clip speaker terminals
on the rear.
The front shows the red Kenwood woofers (with a foam surround) behind two
plexiglass windows (9.25"W x 10.5"H).
The windows are clear in the middle and gray on the edges. Each window is held in by 14
hex bolts and requires an Allen wrench to open
More Specs/Notes
Besides the rated input of 100 watts, the manual also lists maximum input power of 200
watts and peak input power of 300 watts.
The sensitivity of this unit is 88 dB/W at 1 m, but Kenwood also publishes a 108 dB/W in
car figure.
Manual Correction: The manual states that 2- 14 ft
lengths of wire are included, but they were not included in the box we opened.
Loading accessories...
Customer Q&A
Loading articles...