About the Kenwood Excelon KDC-X590
The Kenwood Excelon KDC-X590 CD player brings outstanding audio performance and near-endless playback variety to your car. It'll play just about anything you throw at it even discs loaded with MP3, WMA, and AAC files and its powerful built-in amplifer and premium digital-to-analog converter will deliver crystal-clear sound for all your tunes.
Kenwood's ACDrive makes it easy to navigate through your digital music collection. Voice prompts guide you through folders by announcing the names of your files as you scroll, simplifying the process of finding your favorite songs and letting you keep your eyes on the road. The included software adapts your files to the ACDrive system. And you can use the stereo's USB input to connect your portable music player.
Six preset tone curves give you quick overall sound changes, while a 3-band parametric equalizer offers ultra-fine adjustment of the bass, midrange, and treble. You can manage your bass settings with the built-in subwoofer controls, and you can adjust the frequencies going to your various speakers with the high- and low-pass filters. The result optimum performance from your system.
If you have a larger system in mind, three sets of preamp outputs make it easier to connect your external amps and subs. Add a Kenwood CD changer to the mix using the on-board changer controls, or go for satellite radio with an optional tuner.
- CD player with built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
- fold-down, detachable face with LCD display
- plays CDs, CD-Rs, and CD-RWs (including discs loaded with MP3, WMA, and AAC files)
- Advanced Codec Drive (ACDrive) gives verbal confirmation of digital music folders and files
- System Q EX Sound Control (6 tone presets and a 3-band parametric equalizer)
- System E's+ Advanced Crossover system
- 24-bit digital-to-analog converter
- USB input (rear)
- controls for a Kenwood iPod adapter
- satellite radio controls (SIRIUS or XM subscription, tuner, and antenna required to receive the satellite radio signal)
- compatible with Kenwood's HD Radio tuner
- CD changer controls
- dual zone audio control
- 3 sets of 4-volt preamp outputs
- 18 FM/6 AM presets
- wireless remote
- CD frequency response: 10-20,000 Hz
- CD signal-to-noise ratio: 110 dB
- FM sensitivity: 9.3 dBf
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # KDC-X590
What's in the box:
- AM/FM/CD/Changer controller receiver with 10A fuse inserted in chassis
- Trim ring
- Soft fabric face case
- Wiring harness
- Wireless remote control (RC-527)
- 2 "AA" batteries
- 2 Removal tools
- 4 Panhead ISO-mount screws
- 4 Countersunk ISO-mount screws
- 1 Left face fixing bracket
- 1 Right face fixing bracket
- 2 Face fixing screws
- Kenwood Advanced Codec Drive CD-ROM
- Instruction Manual (English/French/Spanish)
- Media Manager Installation Manual (6 languages)
- Warranty Card
- Kenwood Car Audio Passport
- Sheet concerning Demo mode (attached to receiver)
- Correction sheet
Kenwood Excelon KDC-X590 reviews
Thanks for submitting your review
More details on the Kenwood Excelon KDC-X590
Features & specs
|USB Port Power||---|
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||Both|
|RMS Power (CTA-2006)||N/A|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||30-20kHz|
|Sub Preamp Outputs||Yes|
|Switchable Rear Preamp Outputs||No|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||4 volts|
|Key Button Color||Red/Blue|
|Steering Wheel Control Compatible||---|
|Parts Warranty||2 Years*|
|Labor Warranty||2 Years*|
|FM Sensitivity||9.3 dBf|
|Radio Data System||No|
|Music File Playback|
|Second Camera Input Lane Watch||N|
USB Port: The rear-panel USB cable allows you to play USB mass storage devices loaded with AAC, MP3, and WMA files. MP3 files with a bit rate from 8-320 kbps and WMA files with a bit rate from 48-192 kbps are supported.
Note: The 39" USB cable is terminated with a USB Type A port.
AAC/MP3/WMA Playback: The receiver can play AAC, MP3 and WMA files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc should have a maximum of 8 directory levels, 100 folders, and 4096 files per folder. During MP3/WMA playback, the unit displays any recorded ID3 Tag information. AAC ID3 tags cannot be displayed.
Kenwood Advanced CODEC Drive: The KDC-X590 features Advanced CODEC Drive (ACDrive) to help you organize your digital music files and burn CDs with advanced features. With the PhatNoise Media Manager (on the supplied CD-ROM software), you can browse compressed audio files by playlists, artists, albums or genres. The receiver's built-in Voice Index will "announce" artist, album, and genre names when an ACDrive disc is played. The software will also help you rip music from CDs and encode them as AAC files. To help you keep up-to-date, the Media Manager software allows you to download new CODECs and features and download them to a CD for upgrading the receiver. (See Minimum Computer Requirements below for installing the software on your computer).
24-Bit Burr-Brown D-A Converter: The KDC-X590 features an audiophile-quality 24-bit Burr-Brown digital-to-analog converter for superb CD sound. The Burr-Brown D-A converter maximizes the musical resolution of CDs, CD-R/Ws, and AAC/MP3/WMA-encoded discs.
Satellite Radio Ready: The head unit is directly compatible with the SIRIUS SIR-KEN1 Satellite Tuner for Kenwood (item # 607SIRKEN1). The Terk XMDirect universal XM Satellite Radio tuner (209XMD1000) can be connected to and controlled by the head unit when used with the XMDirect Smart Adapter for Kenwood (209XMDKEN1).
Note: In addition to the optional satellite tuner, you will also need the proper antenna and a subscription to SIRIUS or XM Satellite Radio.
Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP Off" (flat), "SP OEM" (for OEM factory speaker systems), "SP 6x9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
Note: The Speaker Setting affects the bass, midrange, and treble values of the System Q EX presets. The speaker setting should be selected first.
System Q-EX Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music: Rock, Pops, Easy, Top 40, Jazz, and Natural. In addition, you may store your own settings under the "User Memory" EQ curve. Each preset has its own bass center frequency, bass level, bass Q factor, bass extension, middle center frequency, middle level, middle Q factor, treble center frequency, and treble level settings. You may adjust the bass center frequency (40, 50, 60, 70, 80, 100, 120 or 150Hz), bass level (-8 to +8), bass Q factor (1.00, 1.25, 1.50 or 2.00), bass extension (On or Off), middle center frequency (0.5, 1.0, 1.5 or 2.0kHz), middle level (-8 to +8), middle Q factor (1.0 or 2.0), treble center frequency (10.0, 12.5, 15.0 or 17.5kHz), and treble level (-8 to +8). The System Q EX can be turned off in the menu, still allowing you to adjust the bass, middle and treble levels only.
Subwoofer Preamp Output: The KDC-X590 is equipped with a pair of subwoofer preamp outputs. The subwoofer outputs can easily be turned on/off. When the subwoofer output is turned on, you can adjust the volume (-15 to +15 in increments of 2), set the low pass filter cutoff (50Hz, 60Hz, 80Hz, 100Hz, 120Hz, or Through), and the phase (normal, reverse).
System E's+: In addition to System Q Sound Control, the KDC-X590 features the System E's+ crossover system for the speaker and preamp outputs. You can make the following adjustments:
- Front High Pass Filter: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180 Hz, 220Hz, or Through (no filter)
- Rear High Pass Filter: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180 Hz, 220Hz or Through (no filter)
- Low Pass Filter: 50Hz, 60Hz, 80Hz, 100Hz, 120Hz or Through (no filter)
Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, FM, AM, Satellite, and CD changer).
Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
Built-in Amp Switch: If the audio signals are output to external amplifiers, you can turn off the internal amplifier to improve audio quality.
Dual Zone System: When using an optional aux input adapter, the KDC-X590's Dual Zone System allows you to output one source to the front channels and another source to the rear channels. The main source can be the internal disc player, tuner, or a source connected via the 13-pin CD changer input. The sub source is a device connected to the optional aux input. You can assign the sub source to either the front or rear channels. When the Dual Zone System is activated, the volume of the front channels is controlled by the volume knob, while the volume of the rear channels is controlled in the Audio Control menu.
CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
HD Radio Ready: With an optional Kenwood HD Radio tuner (item # 113HR100TR), you will be able to receive digital AM/FM broadcasts from local stations where available. This new technology will significantly improve audio quality and reception, as well as include information such as artist name and song titles or traffic news, viewable on the receiver's display.
Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. The CRSC circuit can be turned on or off.
Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
Security Code: You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational. The security code may be disabled if desired.
Bass Management System (B.M.S.): You can remotely adjust the bass boost of a compatible Kenwood amplifier with the Bass Management System (B.M.S.). When properly connected, you can set the bass boost to Flat, +6dB, +12dB, and if the amplifier is capable, +18dB. In addition, you can set the B.M.S. frequency offset to "Normal" or "Low." The "Low" setting drops the bass boost normal center frequency by 20%.
Note: The pink/black lead on the receiver's wiring harness should be connected to the amp's B.M.S. terminal.
Remote Control: The KDC-X590 comes with the RC-527 wireless remote control with a full numeric keypad. The remote includes volume control for the rear channels when the unit is operating in the Dual Zone mode. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L=5.369", W=1.968", D=1.198".
Steering Wheel Remote Compatibility: The KDC-X590 has a "steering remote control" lead on the back panel. When used with the optional SWI-ALP interface (item #127SWIALP), you can retain the use of your steering wheel and/or rear seat radio controls when replacing the factory head unit in select vehicles. The SWI-ALP is compatible with over 95% of the vehicles made from 1986 to the present. Compatible vehicles include many Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Honda, Hummer, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln, Mazda, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Plymouth, Pontiac, Saab, Saturn, Suzuki, Toyota, and Volkswagen vehicles and Harley Davidson motorcycles. Please consult "What Fits My Car" to see if your vehicle is compatible.
Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed." In addition, while the unit is in Standby mode, you can turn the clock display on or off. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed." Pressing and holding the source button turns the unit off completely.
Display Illumination Control: When this function is active, the display turns off after 5 seconds if no operation is performed. This reduces the glare during night driving.
Display Dimmer: When the dimmer control is set to "on," the display automatically dims when the vehicle lights are turned on. When set to "off," the display doesn't dim.
Note: In order for the display dimmer feature to operate, the orange/white wire in the supplied wiring harness must be connected to the vehicle's headlight circuit.
Optional Auxiliary Input: With an optional adapter (item 113CAC1AX or 113KCAS220), you can turn the unit's CD changer input into an auxiliary input.
Optional iPod Adapter: This receiver is compatible with the optional Kenwood KCA-iP500 iPod control interface (item # 113IP500). When an iPod is connected to the interface, all of the iPod's controls will be disabled and it will be controlled from the receiver. With this interface, you'll be able to play your iPod music files through your Kenwood receiver and in most cases have all the titling information appear on the receiver's display.
Compatibility: This unit is directly compatible with Kenwood changers manufactured in 1998 or later. If the changer has an O-N switch, the switch will need to be set to the "N" position.
Changer Controls: In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random.
CD Text/MD Display: When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.
PhatNoise Media Manager Software: To use Media Manager software, the following software and hardware are required:
- Software: Microsoft Windows 98SE, ME, 2000, or XP
- Personal computer (main unit, display, and peripheral units) incorporating a 500MHz or better Pentium II processor (or the equivalent) on which the above OS can run normally
- 128MB RAM or more
- Hard disc with 200MB free space
- CD-R/CD-RW drive
- Others: Internet connection environment
- Note: Administrator authority is required when installing Media Manager in Windows 2000 or XP
Warranty Note: The unit comes packed with a warranty card that offers a 1-year parts and labor warranty. Per Kenwood, this unit has a 2-year parts and labor warranty.
The Kenwood Excelon KDC-X590 replaces these items