About the Kenwood KFC-P603
You don't see members of your favorite band scrunched together at a concert. So there's no reason to scrunch together the output from their latest CD in a small, single speaker. The KFC-P603 is another great set of separates from Kenwood that allows you to position the drivers independently for dramatically improved imaging.
The pearl mica-injection molded woofer reproduces those deep lows just like that band intended, while the PEI balanced dome tweeter delivers sharp, crisp high notes. A passive 6k Hz crossover directs frequencies to the proper drivers so that the woofer and tweeter don't strain to handle notes outside of their range.Details:
- pearl mica injection-molded polypropylene woofer with rubber surround
- PEI balanced dome tweeter
- sensitivity 91 dB
- frequency response 35-32,000 Hz
- recommended power range 8-50 watts RMS
- peak power handling 170 watts
- woofer top mount depth 2-1/16"
What's in the box:
- 2 Woofers
- 2 Grilles with grille rings
- 2 Tweeters
- 2 Crossovers with attached 19" input/output leads (the input leads have bare wire and the output leads are terminated with quick slides)
- 2 Flush mount housings
- 2 Flush mount retaining clips
- 2 Metal flush/surface mount tweeter support plates
- 2 Flush/surface mount back plates
- 2 Surface mount housings
- 2 Metal angle mount support plates
- 2 Angle mount brackets
- 4 Self-adhesive foam cushions
- 2 Pieces of self-adhesive tape
- 4 Small speed clips
- 12 Large speed clips
- 4 Wing nuts
- 4 Machine bolts
- Eight 1" self-tapping screws
- Sixteen 5/8" self-tapping screws
- Two 1/4" self-tapping screws
- Instruction Manual
- Warranty Card
Thanks for submitting your review
More details on the Kenwood KFC-P603
Features & specs
|Tweeter Design||Balanced dome|
|Woofer Composition||Pearl Mica IMPP|
|Woofer Surround||Butyl rubber|
|Parts Warranty||1 YEAR|
|Labor Warranty||1 YEAR|
|Sensitivity (1W at 1 meter)||91|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||35 - 32k Hz|
|Minimum RMS Wattage||8|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||170|
|Top-mount Depth (Inches)||2 1/8|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 15/16|
|Mounting Height (Inches)||0.342|
Woofer Cone Material: The woofer cones are constructed of Strato-Blue Pearl-Mica Injection-Molded Polypropylene. Uniform pearl mica crystals form an overlapping structure that adds strength and heat resistance to polypropylene, resulting in reduced distortion and improved reliability. For a smooth response, each woofer uses a butyl rubber surround.
Tweeter Material: Each 3/4" balanced-dome tweeter is made with PEI. PEI (Poly-Ether Imide) is a polymer film that has ideal sound characteristics, making it perfect for use as a tweeter. A PEI balanced-dome tweeter produces a wide soundstage for superior imaging.
Tweeter Mounting Options: The tweeters may be flush, surface or angle mounted. The tweeters swivel inside the flush and surface mount sockets, but they do not swivel on the angle mount brackets. The angle mount brackets surface mount to the vehicle and hold the tweeters at a fixed angle (15 or 60 degrees).
Tweeter Mounting Dimensions:
|Flush Mount (swivel)||Surface Mount (swivel)||Angle Mount (fixed 15 or 60 degree angle)|
|Mounting Depth||0.672"||0.428" (screw depth)||0.531" (screw depth)|
(15 degrees) |
1.468" (60 degrees)
Crossover Dimensions: 4.865"L x 1.804"W x 1.067"H
Crossover Type and Specifications: 2-way crossovers, with 6000Hz high-pass and low-pass crossover points, are included, so the tweeters and woofers will receive only the frequencies they are best able to reproduce.
K-Glow Tweeter Protection Circuit: This tweeter protection circuit uses an incandescent lamp to divert power from the tweeter at excessive input levels. Because the lamp's impedance increases with heat, as the power to the tweeter increases the circuit absorbs more power, continually protecting the tweeter from damage.
Input/Output Connections: The
crossover input wires are bare ended, and the output wires are terminated with
Mounting Tabs: There are two mounting tabs on each crossover.