About the Kenwood KFC-P710PS
The performers
The performers
After years of patchy factory sound, I remember installing aftermarket speakers and simply being grateful for audio that was consistent and solid. Kenwood's Performance Series delivers all of that and goes a step beyond, providing articulate lows, clean vocals, and startling highs. With their latest technology incorporated into these speakers, you'll get the biggest sonic bang for your buck.
Quality Kenwood sound
Kenwood's KFC-P710PS 6-1/2" component system provides a rich, dynamic sound reinforced by a solid low end. This polypropylene woofer cone sports a Diamond Array pattern that increases surface strength for reduced distortion and improved bass response. A rubber surround provides reliable playback in spite of the prolonged exposure to the elements that life in your car doors brings.
A 1" soft dome tweeter rounds out this strong system, providing high-frequency details with accuracy. And Kenwood makes things a little easier by incorporating an in-line crossover network into each tweeter — no need to find a spot for a bulky crossover module.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- component system includes two 6-1/2" woofers and two tweeters
- Diamond Array Pattern injection polypropylene woofer with rubber surround
- 1" PEI dome tweeter
- in-line crossover network
- handles up to 80 watts RMS (280 watts peak power)
- frequency response: 63-24,000 Hz
- sensitivity: 86 dB
- woofer top-mount depth: 2-3/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KFC-P710PS
What's in the box:
Kenwood KFC-P710PS owner's manual
- Two woofers
- 2 Woofer grilles
- 2 Plastic grille rings
- 2 Multi-application woofer mounting rings
- 2 Tweeters (each tweeter has a 5" Length of wire attached)
- 2 Flush-mount tweeter housings (installed on tweeters)
- 2 Flush-mount retaining clips
- 2 OEM tweeter mounting brackets
- Two 30" Tweeter wires with in-line crossovers
- Eight 1" Screws
- Four 5/8" Screws
- Eight 1/4" Screws
- 2 Wing nuts
- 8 Large speed clips
- 4 Small speed clips
- Grille putty
- Installation instructions (English/ French/ Spanish)
- Warranty information
- Specifications and Templates on the box
Reviews
Customer reviews
Loading reviews...
Kenwood KFC-P710PS reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KFC-P710PS
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | 1" Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | PEI | |
| Woofer Composition | Polypropylene | |
| Woofer Surround | Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 86 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 63 - 24k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 80 | |
| Peak Power Handling (Watts) | 280 | |
| Top-mount Depth (Inches) | 2 1/4 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 4 15/16 | |
| Mounting Height (Inches) | 0.49 | |
Product Research
Features
Woofers: The 6-3/4" woofer cones are textured Polypropylene and use rubber surrounds for added durability and bass response. The woofer basket is designed to fit a standard 4-hole 6-3/4" application. The included adapter rings expand the woofers' compatibility to include the 3-hole 6-3/4" pattern used by GM and Chrysler, the standard 3-hole 6-1/2" pattern, and Ford's 4-hole 6-1/2" pattern. Please enter your vehicle information to confirm compatibility.
Soft Dome Tweeters: The 1" soft dome tweeters offer smooth highs and low distortion.
Tweeter Mounting Options: The tweeters can be flush mounted using the supplied housings and metal retaining-clips. Once installed the tweeters can pivot in the housing, so their angles can be adjusted to obtain a better soundstage. The tweeters can also be top or bottom mounted in a factory tweeter location using the included brackets. The tweeters cannot pivot when installed in the OEM brackets. Once mounted in the appropriate housing, the tweeters have these dimensions:
| Flush Mount | Factory Top Mount (remove bottom mount flanges) | Factory Bottom Mount (remove top mount flanges) | |
| Mounting Depth | 1.288" | mounting screw depth | 1.005" |
| Mounting Height | 0.674" | 0.928" | 0" |
| Cutout Diameter | 1.754" | 1.70" | 1.70" |
| Frame Diameter | 2.081" | 2.634" | 2.667" |
Crossover Network: The high-pass crossovers are integrated in the included 30" tweeter wires. The crossover point is 4.9 kHz.
The Kenwood KFC-P710PS replaces these items
- package includes two 6-3/4" woofers and two tweeters
- Diamond Array Pattern polypropylene woofer with rubber surround
- 1" soft dome tweeter
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
Great sounding and easy to install with no extra cutting to fit them. Used factory wiring with supplied crossovers, works perfectly. Matched up with raer speakers installed at same time. Install parts added by Crutchfield are fantastic.
Richard F from Portland, OR