About the Kenwood KFC-T204
You expect a lot from your tweeter components, and Kenwood's engineers accommodate you with the redesigned KFC-T204 3/4" soft dome tweeters. The PEI dome design, coupled with a five-way mounting system, provide the quality and versatility that makes your upper register really stand out. In addition to the superior imaging that separates deliver, this tweeter handles up to 170 watts of peak power — more than previous Kenwood models. 1-year warranty.
Details:- frequency response 3,500-32,000 Hz
- power range 2-50 watts RMS
- 170 watts peak power
- sensitivity 91 dB
- flush mount diameter 1-13/16"
What's in the box:
Kenwood KFC-T204 owner's manual
- 2 Tweeters
- 2 Crossovers with attached 19" input/output leads (the input leads have bare wire and the output leads are terminated with quick slides)
- 2 Flush mount housings
- 2 Flush mount retaining clips
- 2 Metal flush/surface mount tweeter support plates
- 2 Flush/surface mount back plates
- 2 Surface mount housings
- 2 Metal angle mount support plates
- 2 Angle mount brackets
- 4 Self-adhesive foam cushions
- 2 Pieces of self-adhesive tape
- 4 Small speed clips
- 4 Large speed clips
- 4 Wing nuts
- 4 Machine bolts
- Eight 5/8" self-tapping screws
- Two 1/4" self-tapping screws
- Instruction Manual
- Warranty Card
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KFC-T204
Features & specs
| General | ||
|---|---|---|
| Speaker Size | ||
| Design | 1-way | |
| Tweeter Design | Balanced dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Polyetherimide | |
| Woofer Composition | NA | |
| Woofer Surround | NA | |
| Parts Warranty | 1 YEAR | |
| Labor Warranty | 1 YEAR | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 91 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 3500 - 32k Hz | |
| Minimum RMS Wattage | 2 | |
| Maximum RMS Wattage | 50 | |
| Peak Power Handling (Watts) | 170 | |
| Top-mount Depth (Inches) | 0 11/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 1 13/16 | |
| Mounting Height (Inches) | 0.476 | |
Product Research
Tweeter Material: Each 3/4" balanced-dome tweeter is made with PEI. PEI (Poly-Ether Imide) is a polymer film that has ideal sound characteristics, making it perfect for use as a tweeter. A PEI balanced-dome tweeter produces a wide soundstage for superior imaging.
Tweeter Mounting Options: The tweeters may be flush, surface or angle mounted. The tweeters swivel inside the flush and surface mount sockets, but they do not swivel on the angle mount brackets. The angle mount brackets surface mount to the vehicle and hold the tweeters at a fixed angle (15 or 60 degrees).
Tweeter Mounting Dimensions:
| Flush Mount (swivel) | Surface Mount (swivel) | Angle Mount (fixed 15 or 60 degree angle) | |
| Mounting Depth | 0.672" | 0.428" (screw depth) | 0.531" (screw depth) |
| Mounting Height | 0.476" | 1.129" | 1.203"
(15 degrees) or 1.468" (60 degrees) |
| Cutout Diameter | 1.762" | NA | NA |
| Frame Diameter | 2.076" | 1.761" | 1.564" |
Crossover Dimensions: 4.865"L x 1.804"W x 1.067"H
Crossover Type and Specifications: The crossovers contain a 6000Hz high-pass network to prevent low frequencies from being sent to the tweeters.
K-Glow Tweeter Protection Circuit: This tweeter protection circuit uses an incandescent lamp to divert power from the tweeter at excessive input levels. Because the lamp's impedance increases with heat, as the power to the tweeter increases the circuit absorbs more power, continually protecting the tweeter from damage.
Input/Output Connections: The
crossover input wires are bare ended, and the output wires are terminated with
quick-slides.
Mounting Tabs: There are two mounting tabs on each crossover.
Loading accessories...
Customer Q&A
Loading articles...
