About the Kenwood KDC-MP228
The KDC-MP228 CD receiver offers plenty of power, tight sound controls, and MP3 and WMA playback a great package at such an attractive price!
With this receiver, your never-ending supply of tunes will always sound great. The internal amplifier (22 watts RMS/50 peak x 4 channels) adds fullness to your music, while the System Q Sound Control's three-band equalizer and six preset tone curves let you fine-tune the sound. For some extra bass, you can add an amp/sub combo to the set of preamp outputs.
The hours of MP3s and WMAs you've burned on disc are enough entertainment, right? Of course not! That's why Kenwood also included satellite radio controls add a compatible SIRIUS or XM tuner (plus antenna and subscription), and you'll enjoy coast-to-coast music, news, sports, talk, and entertainment. You can also dive into the improved sound quality and reception of HD Radio when you add a compatible tuner. Where available, it offers up CD-like FM and FM-like AM broadcasts.
- CD receiver with built-in amplifer (22 watts RMS/50 peak x 4 channels)
- detachable face
- plays CDs, CD-Rs, and CD-RWs including discs loaded with MP3 and WMA files
- System Q Sound Control
- bass, treble, and midrange controls
- XM and SIRIUS Satellite Radio-ready (you can add satellite radio for under $100, plus subscription)
- HD Radio ready
- CD changer controls
- optional auxiliary input
- one set of preamp outputs
- CR-2 tuner
- 18 FM/6 AM presets
- wireless remote
- CD frequency response: 10-20,000 Hz
- CD signal-to-noise ratio: 105 dB
- FM sensitivity: 9.3 dBf
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KDC-MP228
What's in the box:
- AM/FM/CD receiver with 10-amp fuse inserted into chassis
- Hard plastic face case
- Trim ring
- Wireless remote control (RC-517)
- 2 "AA" batteries
- Wiring harness
- 2 Removal tools
- 4 Panhead ISO-mount screws
- 4 Countersunk ISO-mount screws
- Face fixing screw (4mm dia. x 16mm)
- Instruction Manual(English/French/Spanish)
- Manual correction sheet
- Warranty Card
- Kenwood Car Audio Passport
Kenwood KDC-MP228 reviews
Thanks for submitting your review
More details on the Kenwood KDC-MP228
Features & specs
|USB Port Power||---|
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||Both|
|RMS Power (CTA-2006)||N/A|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||30-20kHz|
|Sub Preamp Outputs||No|
|Switchable Rear Preamp Outputs||No|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||2 volts|
|Display Color||Lite/Med Blue|
|Key Button Color||Red/blue|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|FM Sensitivity||9.3 dBf|
|Radio Data System||No|
|Music File Playback|
|Second Camera Input Lane Watch||N|
MP3/WMA Playback: The KDC-MP228 can play MP3 and WMA files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc should have a maximum of 8 directory levels, 50 folders, and 255 files per folder. A total of up to 512 MP3/WMA files and folders can be played back by this unit. During MP3/WMA playback, the unit displays any recorded ID3 Tag information.
Satellite Radio Ready: You can connect a satellite radio tuner to the KDC-MP228 in a number of ways. The unit is directly compatible with the Sirius SIR-KEN1 Satellite Tuner for Kenwood (item # 607SIRKEN1). The Terk XMDirect universal XM Satellite Radio tuner (209XMD1000) can be connected to and controlled by the head unit when used with the XMDirect Smart Adapter for Kenwood (209XMDKEN1). In addition, you can connect an independently controlled "plug 'n play" unit such as the Delphi SKYFi or Kenwood Here2Everywhere to the head unit through the optional Aux Input adapter (113CAC1AX or 113KCAS210).
Note: In addition to the optional satellite tuner, you will also need the proper antenna and a subscription to Sirius or XM Satellite Radio.
HD Radio Ready: With an optional Kenwood HD Radio tuner (item # 113HR100TR), you will be able to receive digital AM/FM broadcasts from local stations where available. This new technology will significantly improve audio quality and reception, as well as include information such as artist name and song titles or traffic news, viewable on the receiver's display.
System Q Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. Each preset has its own level settings for bass (100Hz), midrange (1kHz), and treble (10kHz). Each level can also be set to your personal taste between -8 and +8 and stored in the "User" memory. The 6 preset curves with their respective bass, mid, and treble levels are as follows:
- Rock: Bass +6, Mid +1, Treble +2
- Pops: Bass +3, Mid +2, Treble +6
- Easy: Bass +6, Mid 0, Treble -2
- Top 40: Bass +3, Mid +1, Treble +8
- Jazz: Bass +5, Mid +2, Treble +2
- Natural: Bass 0, Mid 0, Treble 0
Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP Off" (flat), "SP OEM." (for OEM factory speaker systems), "SP 6x9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, FM, AM, and CD changer).
Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. The CRSC circuit can be turned on or off.
Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off.
Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
Security Code: You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational.
Remote Control: The KDC-MP228 comes with the RC-517 wireless remote control with a full numeric keypad. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L=5.369", W=1.968", D=1.198".
Display Selections: When listening to the radio, you can switch the display between the currently tuned frequency and the clock. During disc play (internal player or external changer), you can switch between the disc or track title (with CD Text disc), track number/play time, or clock. If an MP3/WMA disc is playing, you can display the song title/artist name, album/artist name, folder name, file name, track number/play time, or clock.
Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed". In addition, while the unit is in Standby mode, you can switch between the Clock Display and "Standby." When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed". Pressing and holding the source button turns the unit off completely.
Display Dimmer: The display has two brightness settings. Using the display dimmer button, you can toggle between normal and dimmed.
Compatibility: This unit is directly compatible with Kenwood changers manufactured in 1998 or later. If the changer has an O-N switch, the switch will need to be set to the "N" position. If you have a Kenwood changer manufactured before 1998, you will need the KCA-S210A switching adapter. Changers manufactured before 1994 require the CA-DS100 converter cord (113CADS100) and the KCA-S210A switching adapter.
Changer Controls: In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random.
Auxiliary Input "Ready": When used with an optional adapter, this unit can accept input from an auxiliary source. When the CA-C1AUX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the adapter plugs into the DIN changer control connection on the head unit. When the KCA-S210A 2-changer switch (item 113KCAS210) is used, you can connect a CD changer and an auxiliary audio source at the same time. When an auxiliary audio source is connected, you can choose from one of six names for the source: Aux Ext, TV, DVD, Video, Game, or Portable.
CD Text/MD Display: When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.
The Kenwood KDC-MP228 replaces these items