About the Kenwood KDC-MP5032
Bring your entire digital music collection into your car Kenwood's KDC-MP5032 CD player will play back discs you've loaded with MP3, WMA, and AAC files. You can drive all day without having to change CDs, and the stereo's hands-on controls allow you to scroll quickly through your folders to find the tunes you want.
You also get a strong internal amp for clear sound, with Kenwood's Supreme audio processing to restore the dynamic range of your compressed audio files. System Q sound control gives you six preset tone curves and three tone controls for tweaking the sound, plus a loudness switch for an extra low-end boost. Use the built-in filters to customize the frequencies going to each speaker in your system.
Building a bigger system? Three sets of 4-volt preamp outputs offer convenient connections for your amps and subs, while the subwoofer controls let you manage the character and volume of your bass right from the driver's seat. You can add a Kenwood CD changer, satellite radio, or HD Radio tuner to expand your entertainment options. You can even connect your iPod using Kenwood's optional iPod adapter.
The fluorescent display ensures that all your system information shows up day or night, while the full-function remote lets you manage the music from anywhere in the car.
- CD player with built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
- CD, CD-R, and CD-RW compatible, including discs loaded with MP3, WMA, and AAC files (not compatible with songs downloaded from Apple iTunes Music Store)
- motorized, auto-slide detachable face
- System Q Sound Control (including six preset tone curves and a 3-band EQ)
- System E's+ Advanced Crossover system
- three sets of 4-volt preamp outputs
- Supreme audio processing for better sound from your compressed audio files
- satellite radio-ready (XM or SIRIUS tuner, service subscription, and antenna required)
- HD Radio-ready
- CD changer controls
- wireless remote
- dual zone control
- 18 FM/6 AM presets
- CD frequency response: 10-20,000 Hz
- CD signal-to-noise ratio: 105 dB
- FM sensitivity: 9.3 dBf
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KDC-MP5032
What's in the box:
- AM/FM/CD receiver with 10A fuse inserted in chassis
- Wiring harness
- Trim ring
- Soft fabric face case
- Wireless remote control (RC-527)
- 2 "AA" batteries
- 2 Removal tools
- 4 Panhead ISO-mount screws
- 4 Countersunk ISO-mount screws
- Face fixing screw with flat washer
- Instruction Manual (English)
- Instruction Manual (Spanish/French)
- Warranty Card
- Kenwood Car Audio Passport
- Sheet concerning Demo mode (attached to receiver)
Kenwood KDC-MP5032 reviews
Thanks for submitting your review
More details on the Kenwood KDC-MP5032
Features & specs
|USB Port Power||---|
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||Both|
|RMS Power (CTA-2006)||N/A|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||30-20kHz|
|Sub Preamp Outputs||Yes|
|Switchable Rear Preamp Outputs||No|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||4 volts|
|Key Button Color||Red or green|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|FM Sensitivity||9.3 dBf|
|Radio Data System||No|
|Music File Playback|
|Second Camera Input Lane Watch||N|
AAC/MP3/WMA Playback: The receiver can play AAC, MP3 and WMA files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc should have a maximum of 8 directory levels, 100 folders, and 255 files per folder. During MP3/WMA playback, the unit displays any recorded ID3 Tag information. AAC ID3 tags cannot be displayed.
Motorized Angled Faceplate: When inserting or ejecting a disc, the motorized faceplate automatically slides down and out to expose the disc slot. Furthermore, you can set the faceplate at one of three angles for best visibility of the display, in addition to the fully closed position.
Satellite Radio Ready: The head unit is directly compatible with the SIRIUS SIR-KEN1 Satellite Tuner for Kenwood (item # 607SIRKEN1). The Terk XMDirect universal XM Satellite Radio tuner (209XMD1000) can be connected to and controlled by the head unit when used with the XMDirect Smart Adapter for Kenwood (209XMDKEN1).
Note: In addition to the optional satellite tuner, you will also need the proper antenna and a subscription to SIRIUS or XM Satellite Radio.
System Q Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. Each preset has its own level settings for bass (100Hz), midrange (1kHz), and treble (10kHz). Each level can also be set to your personal taste between -8 and +8 and stored in the "User" memory. The 6 preset curves with their respective bass, mid, and treble levels are as follows:
- Rock: Bass +6, Mid +1, Treble +2
- Pops: Bass +3, Mid +2, Treble +6
- Easy: Bass +6, Mid 0, Treble -2
- Top 40: Bass +3, Mid +1, Treble +8
- Jazz: Bass +5, Mid +2, Treble +2
- Natural: Bass 0, Mid 0, Treble 0
Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP Off" (flat), "SP OEM" (for OEM factory speaker systems), "SP 6x9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
System E's+: In addition to System Q Sound Control, the KDC-MP5032 features the System E's+ crossover system for the speaker and preamp outputs. You can make the following adjustments:
- Front High Pass Filter: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 220Hz or Thru (no filter)
- Rear High Pass Filter: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 220Hz or Thru (no filter)
- Low Pass Filter: 50Hz, 60Hz, 80Hz, 100Hz, 120Hz or Thru (no filter)
Supreme Setting: This setting improves the sound quality of low bit-rate MP3/WMA files by digitally enhancing the high frequencies.
Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, FM, AM, Satellite, and CD changer).
Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
Built-in Amp Switch: If the audio signals are output to external amplifiers, you can turn off the internal amplifier to improve audio quality.
Dual Zone System: When using an optional aux input adapter, the KDC-MP5032's Dual Zone System allows you to output one source to the front channels and another source to the rear channels. The main source can be the internal disc player, tuner, or a source connected via the 13-pin CD changer input. The sub source is a device connected to the optional aux input. You can assign the sub source to either the front or rear channels. When the Dual Zone System is activated, the volume of the front channels is controlled by the volume knob, while the volume of the rear channels is controlled in the Audio Control menu.
CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
HD Radio Ready: With an optional Kenwood HD Radio tuner (item # 113HR100TR), you will be able to receive digital AM/FM broadcasts from local stations where available. This new technology will significantly improve audio quality and reception, as well as include information such as artist name and song titles or traffic news, viewable on the receiver's display.
Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. The CRSC circuit can be turned on or off.
Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
Security Code: You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational. The security code may be disabled if desired.
Remote Control: The KDC-MP5032 comes with the RC-527 wireless remote control with a full numeric keypad. The remote includes volume control for the rear channels when the unit is operating in the Dual Zone mode. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L=5.369", W=1.968", D=1.198".
Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed." In addition, while the unit is in Standby mode, you can turn the clock display on or off. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed." Pressing and holding the source button turns the unit off completely.
Display Dimmer: When the dimmer control is set to "on," the display automatically dims when the vehicle lights are turned on. When set to "off," the display doesn't dim.
Note: In order for the display dimmer feature to operate, the orange/white wire in the supplied wiring harness must be connected to the vehicle's headlight circuit.
Optional iPod Adapter: This receiver is compatible with the optional Kenwood KCA-iP500 iPod control interface (item # 113IP500). When an iPod is connected to the interface, all of the iPod's controls will be disabled and it will be controlled from the receiver. With this interface, you'll be able to play your iPod music files through your Kenwood receiver and in most cases have all the titling information appear on the receiver's display.
Compatibility: This unit is directly compatible with Kenwood changers manufactured in 1998 or later. If the changer has an O-N switch, the switch will need to be set to the "N" position.
Changer Controls: In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random.
Auxiliary Input "Ready": When used with an optional adapter, this unit can accept input from an auxiliary source. When the CA-C1AUX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the adapter plugs into the DIN changer control connection on the head unit. When the KCA-S220A 2-changer switch (item 113KCAS220) is used, you can connect a CD changer and an auxiliary audio source at the same time. When an auxiliary audio source is connected, you can choose from one of six names for the source: Aux Ext, TV, DVD, Video, Game, or Portable.
CD Text/MD Display: When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.