About the Kenwood KDC-MPV619
Take the fast lane from the information superhighway to the endless highway with Kenwood's KDC-MPV619 CD/MP3 receiver. Just burn a CD-R of your favorite MP3 files, and grab your audio CDs, CD-Rs, and CD-RWs they'll all sound great thanks to the 4-way high power (22 watts RMS/50 peak) internal amplifier. System Q Sound Control (6 EQ presets and speaker size matching) helps you compensate for your vehicle's acoustics, so you can get the tone just right. And you'll have speedy access to your MP3s with Kenwood's high-speed file transport.
The detachable faceplate features the Color Shock variable color display with 67 different color combinations. Your receiver will have as many moods and personalities as there are styles of music! You can link the display's color changes to the music source, or to the time of day. Or, you can simply set it to complement your vehicle's dash lighting the choice is yours!
The KDC-MPV619 can also control a Kenwood CD changer or a Sirius Satellite Radio tuner. And, if you're into expanding your system, two sets of preamp outputs send super-clean signal to your outboard amplifiers. A wireless remote lets you make adjustments while keeping your eyes on the road.Details:
- detachable, fold-down face
- Color Shock display with 67 different backlight colors
- selectable green/red button illumination
- plays CDs, CD-Rs, and CD-RWs
- plays MP3 files on CD-R
- readout can display ID-3 tags
- high-speed file transport gives you quick access to any track
- CR-2 tuner
- 18 FM/6 AM presets
- Sirius Satellite Radio controls (Sirius Radio subscription, tuner, and antenna required to receive the satellite radio signal) service is available only in the lower 48 states, not available in Alaska, Hawaii, or U.S. territories
- System Q Sound Control (6 EQ presets and speaker size matching)
- front/rear preamp outputs
- CD/MD changer controls
- wireless remote
- 22 watts RMS/50 peak x 4 channels
- CD frequency response 10-20,000 Hz
- CD signal-to-noise ratio 105 dB
- FM sensitivity 9.3 dBf
- 1-year warranty
What's in the box:
- AM/FM/CD/Changer controller receiver with 10-amp fuse inserted into chassis
- Hard face case
- Trim ring
- Wiring harness
- RC-410 Wireless remote
- CR2025 lithium battery
- 2 Removal tools
- 4 Panhead ISO-mount screws
- 4 Countersunk ISO-mount screws
- 2 Face security screws
- Instruction Manual (English/French/Spanish/Portuguese)
- Warranty Card
- Car Audio Passport card (required if face needs to be replaced)
- Sirius Satellite Radio booklet
Thanks for submitting your review
More details on the Kenwood KDC-MPV619
Features & specs
|Backup Camera Input||No|
|Second Camera Input||No|
|Alexa Voice Control|
|Memory Card Slot||No|
|Satellite Radio Ready||Sirius|
|RMS Power (CTA-2006)||22 watts|
|RMS Power (Manufacturer)||---|
|Peak Output||50 watts|
|RMS Power Bandwidth||30-20kHz|
|Sub Preamp Outputs||No|
|Switchable Rear Preamp Outputs||---|
|Navigation App Compatible (iOS)|
|Navigation App Compatible (Android)|
|Preamp Voltage||1.8 volts|
|Display Color||Color Shock|
|Key Button Color||Green or Red/Blue|
|Steering Wheel Control Compatible||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|FM Sensitivity||9.3 dBf|
|Radio Data System||No|
|Music File Playback|
|Second Camera Input Lane Watch||N|
Security Code: You may program the unit with a 4-digit security code. Once the unit has been programmed with a security code, the code must be entered to use the unit after it has been disconnected from power.
"Color Shock" Variable Color Display: The display backlight can be changed to any of 67 different background colors. When the display is in Scan Mode, the unit will continually cycle through all background colors. In addition, you may choose SRC Mode or Time Mode. In SRC Mode, the unit displays a different preset background color for each source. In Time Mode, the background color changes every six hours. For easy access to the most popular colors when adjusting the display, this unit has Silky White stored under preset 1, Red stored under preset 2, Blue stored under preset 3, and Blue Green stored under preset 4. In addition to these four factory presets, you can store your favorite color under preset 5.
Display Dimming: This unit is equipped with a wire that Kenwood calls an illumination lead, however, it acts as a dimmer lead. When the illumination wire of this unit is connected to the headlamp circuit of your vehicle, and you turn your lights on, the display will dim to a preset level. The display brightness is not affected by the vehicle's dimmer control.
Contrast Adjustment: The display contrast may be adjusted from "1" up to "10" for optimum readability.
Sirius Satellite Radio Controls: This unit can control the optional Kenwood Sirius Satellite tuner (sold separately). The optional tuner will allow you to receive Sirius Satellite Radio.
System Q Sound Control: 6 EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. The preset curves are named "Flat", "Rock", "Pops", "Easy", "Top 40", and "Jazz". In addition, you may store your own settings under the "User Memory" EQ curve. Each preset has its own bass, middle, and treble level settings.
Mobile Preset: The Mobile Preset function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Mobile Preset setting of "SP OFF" (flat), "SP O.E.M." (for OEM factory speaker systems), "SP 6*9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4inch" (for systems with 4" and 5" speakers).
Source Tone Memory: This feature allows you to store bass, middle and treble tone settings for each source (CD, FM, AM and Changer).
Volume Offset Control ("VOL OFFSET"): The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception.
Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains.
Station Name Preset (SNPS): This feature allows you to assign names to radio stations. Up to 32 FM stations and 16 AM stations can be named. Each name can be up to 8 characters in length.
CD Naming: The DNPS (Disc Name Preset) feature can be used to enter names, up to 8 characters long, into memory for up to 30 discs. When a CD changer with disc naming memory is connected, names may be entered for CDs in the changer. The number of names that may be entered for discs in a changer depends on the changer model.
MP3 Playback: This unit can play MP3 files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc should have a maximum of 8 directory levels, 50 folders, and 255 files per folder. During MP3 playback, the following functions are available:
- Folder up/down
- File up/down
- File audible search
- Folder Select: scrolling through the names of folders, you can directly access the folder you want
- Direct File Selection: using the supplied remote control, you can directly access files
- Random Play: all files in a folder are played in random order
- File Repeat Play: repeats the current file
- Folder Repeat Play: repeats the current folder
- File Scan Play: plays the first 10 seconds of each file in a folder
- Last Position Memory: if the unit is shut off or switched to the tuner mode while an MP3 CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off
- ID3 Tag Display: displays ID3 Tag information for files that have been recorded with ID3 tag information
Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off.
Auxiliary Input "Ready": When used with an optional adapter (KCA-S210A or CA-C1AX) or with the KDC-CX87 CD changer, this unit can accept input from an auxiliary source. This unit cannot accept input from an auxiliary source unless the appropriate adapter or CD changer is purchased and connected. When the CA-C1AX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the CA-C1AX plugs into the DIN changer control connection on the head unit.
Weather Band Tuner Compatible: This unit is compatible with the Kenwood KTC-WB100 weather band tuner (sold separately). The optional tuner box allows you to tune in weather band radio stations. There are about 480 weather band radio stations in the United States, and this option allows you to tap into the information needed to prepare for outdoor activities such as sporting events, camping trips and days at the park.
Heads-up Display Compatible: Kenwood's KPA-HD100 heads-up display (sold separately) may be connected to this receiver and placed on the dashboard, or overhead. The heads-up display can give a readout of the information from this receiver's display, allowing you to monitor the radio without the inconvenience and danger of taking your eyes from the road to look down at the radio location.
Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
Compatibility: This unit is directly compatible with Kenwood changers that have an O-N switch. If you have an old Kenwood changer with a square plug, you will need the CA-DS100 converter cord and the KCA-S210A switching adapter. If you have a newer Kenwood changer with a round plug but no O-N switch, you will need the KCA-S210A switching adapter. If you use a changer without an O-N switch, you will not have access to the following functions: DNPS, DNPP, Magazine Random Play and CD Text display.
Changer Controls: In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random.
Disc Name Preset (DNPS): When used with a compatible CD changer, this feature allows you to assign names to discs in the changer. Each name can be up to 8 characters in length. The number of names you can store depends on the CD changer that is connected to the head unit.
Disc Name Preset Play (DNPP): Once a disc has been named, you may press the DNPP button on the remote to display the name of each disc for 5 seconds. When the name of the desired disc appears, you can press the OK button on the remote to select the disc for playback.CD Text/MD Display: When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.
Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed". In addition, while the unit is in Standby mode, the Clock Display can be turned on or off using the DISP button. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed". Pressing and holding the source button turns the unit off completely.
The Kenwood KDC-MPV619 replaces these items