About the Kenwood Excelon P-XW804B
Excel with Excelon
Excel with Excelon
Kenwood's Excelon P-XW804B ported sub enclosure brings you the rich, full bass you love in a solid, durable enclosure that tucks neatly behind your seat or in your trunk. The 8" Excelon subwoofer features a redesigned, oversized cone with ribbed reinforcement that maintains its shape and and maximizes bass response. Its redesigned yoke and large magnet strengthen the sub's magnetic circuit, giving you even better reproduction of low frequencies.
300 watts of bass power
The P-XW804B ported loaded enclosure is less than 6” deep, so it'll fit in some seriously tight spots. Its 4-ohm sub handles up to 300 watts RMS, so send it plenty of power — it'll deliver the powerful bass that makes your music come alive.
- ported enclosure with one 8" oversized Excelon subwoofer
- ribbed polypropylene cone with rubber surround
- 4-ohm impedance
- power handling: 300 watts RMS (900 watts peak power)
- frequency response: 41-300 Hz
- sensitivity: 80 dB
- dimensions: 17-11/16"W x 11-13/16"H x 5-7/8"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # P-XW804B
What's in the box:
- Vented subwoofer enclosure loaded with one 8" subwoofer
- 2 L brackets
- 8 Self-tapping screws (M5 x 25mm)
- Warranty card
Kenwood Excelon P-XW804B reviews
This thing puts out a lot louder more accurate bass than I would have thought for a small 8" sub. I was very impressed.
1 of 1 found this helpful
I'm happy with sub fit good in f250 crew cab 2015 sound good.
0 of 0 found this helpful
Easy to install and fits nicely behind my 2016 Colorado extended cab passenger seat. Could have a little more bass, but it is only an 8" after all. Easy to set up with my alpine 5 channel amp.
5 of 6 found this helpful
Great quality product. Fast shipping.
1 of 4 found this helpful
Fits perfectly in the back cargo area of my wife's 2013 Ford Escape. We had a child and had to downsize from a larger enclosure/sub combo. This lays flat and stuff can be placed right on top. Box is quality. Been running it for about a week and it's not over powering, it's not rattle your fillings loose loud, but it compliments the rest of the cars audio perfectly. I plan on buying a second one of these.
5 of 5 found this helpful
Does the job. Fit nicely under the rear seat of my 2018 f150 super crew.
2 of 2 found this helpful
assume product just what i needed
Pros: nicely constructed
3 of 8 found this helpful
2012 mini clubman+ Memphis viv900.5 + Kenwood Excelon P-XW804B = full rich bass. I was surprised with the output from this little sub. I don't want to ramble on about volume and amazing output but people this little 8 inch really puts out the bass. Now for the overall sound quality I am very confident Kenwood P-XW804B will exceed 90% of the listening population requirements. Sure you can find subs that go lower, hit harder, or may be a litter tighter but you better be ready to spend $300 to $500 and have more room for a bigger box. Oh by the way this sub is small, small enough to fit under the rear deck above the spare tire and below the main floor of a Mini.
Pros: Output, Size
25 of 25 found this helpful
More details on the Kenwood Excelon P-XW804B
Features & specs
|Woofer Size (inches)||8|
|Speakers Per Box||1|
|Pieces in System||1|
|Second Depth (inches)||N/A|
|Connector Type||Spring Posts|
|Frequency Response||41-300 Hz|
|Power Range (Watts RMS)||300|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Overview: The Kenwood Excelon P-XW804B is a loaded subwoofer enclosure with an 8" XR-series oversized driver. This compact, ported enclosure will fit into many vehicles, even where space is at a premium. Included with the subwoofer are two metal L-brackets and hardware for mounting it into your vehicle.
Driver: The P-XW804B contains a single 4-ohm XR-W804 8" driver. The speaker has an oversized cone to give you better low frequency output. Ribs on the underside of the cone add strength to keep it from flexing during excursion, minimizing distortion. The motor structure features a strong magnetic circuit and a reinforced yoke for extra durability.
Enclosure: The subwoofer enclosure is made of medium-density fiberboard (MDF) covered in black carpet. The white and red Kenwood Excelon logo is stitched into the top panel. It has a rectangular shape with a recessed front baffle which allows you to mount the sub vertically or horizontally, either up-firing or down-firing. The enclosure has a 4" x 1" slot port on the left side. The round terminal cup is also located on the left side with spring post terminals that will accept bare wire, pin connectors, and single or dual banana plugs.
- Frequency Response: 41Hz to 300Hz
- Impedance: 4Ω
- Power Handling: 300 watts RMS; 900 watts Peak
- Sensitivity: 80dB (1W/1m)
- Dimensions: Width 18", Height 12", Depth 6"
- Weight: 18.52 pounds
1 question already asked