About the Kenwood Excelon XR-1603HR
Worthy of the Excelon name
Worthy of the Excelon name
Kenwood doesn't take the Excelon name lightly. It's their standard for quality sound and excellent performance, and this Kenwood Excelon XR-1603HR component speaker set surpasses expectations. Every element in this system has been selected and crafted to uplift the audio signal from a high-performance amplifier and receiver, particularly when you're playing high-resolution audio files. Working in unison, these premium parts, enhanced by the latest speaker technology, provide a more life-like listening experience, unencumbered by distortion.
The 6-1/2" woven glass-fiber woofer cone delivers the fullness and punch you don't hear with most factory speakers, and its specially designed surround ensures consistent performance. An aluminum die-cast basket minimizes unwanted vibration, allowing the woofer to cleanly provide all the detail and impact you expect. Kenwood uses a special-design voice coil to give you a signature sound that's driving and powerful.
Soft dome tweeter
Kenwood's sleek, surface-mount tweeter pod gives this system an elegant look that matches its high-resolution sound. The 1" soft dome tweeter itself brings warmth and incredible detail to your music that honors an artist's intention song to song. If you are into high-res music, these tweeters reproduce frequencies up to 48,000 Hz, delivering the extended detail and strong imaging of your high-res FLAC or DSD files. Inline crossovers ensure accuracy without any harshness.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Grilles are not included; the factory grilles should be suitable for most applications.
- component speaker system includes two woofers and two tweeters
- 6-1/2" woven glass fiber woofer cone
- 1" soft dome tweeter with inline crossover
- aluminum woofer basket
- handles up to 40 watts RMS (160 watts peak power)
- extended high-frequency response ideal for high-res music files
- frequency range: 25-48,000 Hz (-10dB)
- sensitivity: 83 dB
- woofer top-mount depth: 1-13/16"
- grilles not included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # XR-1603HR
What's in the box:
- Two Woofers
- 2 Tweeters (each has a 10" length of wire attached)
- 2 Surface mount tweeter pods (with tweeters installed)
- 2 Surface mount pads
- 2 Surface mount brackets
- 2 Factory tweeter mount rings
- Two 7' Lengths of tweeter wire with in-line crossovers
- Two 5" Woofer wire adapters
- Eight 5/8" Screws
- Eight 3/4" Screws
- Four 1/2" Screws
- 4 Speed clips
- 8 Large flat washers
- 8 Small flat washers
- 2 Thick adhesive backed foam gaskets (9/16")
- 2 Thin adhesive backed foam gaskets (1/8")
- 4 Crimp-less wire splice adapters
- Instruction manual (English/ French/ Spanish)
- Specs and tweeter template on box
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Kenwood Excelon XR-1603HR reviews
Thanks for submitting your review
More details on the Kenwood Excelon XR-1603HR
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||1" Dome|
|Woofer Composition||Woven Glass Fiber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||83|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||25 - 48k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||40|
|Peak Power Handling (Watts)||160|
|Top-mount Depth (Inches)||1 7/8|
|Bottom-mount Depth (Inches)||2 1/8|
|Cutout Diameter or Length (inches)||4 15/16|
|Mounting Height (Inches)||0.434|
Tweeter Mounting Options: The tweeters are shipped installed in surface mount pods. Each pod is attached to a foot, and can tilt (approximately 45°) and swivel (approximately 30°) after mounting. The pods can also be disassembled, and some of the parts use to make standard surface mount housings. The tweeters can be removed from the pod entirely and mounted behind factory grilles. (The included mounting rings might be useful in this location.) Once mounted the tweeters have these dimensions:
|Surface Mount Pods||Surface Mount|
|Mounting Depth||0.45" (screw depth)||0.375" (screw depth)|
|Footprint||1.1" (w) x 1.2" (d)||N/A|
Crossover: The 7' tweeter wires have 6 dB/octave in-line high pass crossovers. The crossover point is approximately 9,950 Hz. The tweeter end of each wire has quick slide terminals that easily connect to the tweeter. The input end has two sets of bullet terminals, labeled Audio Components and Speaker. The terminals labeled Audio Components plug into the included woofer wires. The terminals labeled Speaker are not used.
Warranty Note: Although the information included with these speakers indicates a 1-year warranty, they are actually covered by the Kenwood eXcelon 2-year warranty.
4 questions already asked