About the Kenwood eXcelon KFC-Xr601
Kenwood eXcelon's high-performance DualMag speakers make clean, powerful sound reproduction a reality in your vehicle. Two small but powerful neodymium magnets create a strong and symmetrical magnetic field for precise control of the PBO pearl-mica injection-molded poly woofer cone. You'll appreciate the extra detail and clarity in the low and midrange frequencies.
The rugged co-polymer basket eliminates problem resonances, while a heat-resistant butyl rubber surround exerts tight control over woofer movement for lower distortion and greater speaker reliability. The smooth-sounding HyperNyl dome tweeter is suspended over the cone on a two-spoke support that allows full woofer excursion. You can improve imaging by installing the speaker so that the angle-mounted tweeter fires more more directly toward your ears.
Install the KFC-Xr601 speakers in your 6-1/2" openings, and hear the DualMag difference.Details:
- angle-mounted 1" HyperNyl dome tweeter
- tweeter mounting bridge eliminates interference with woofer
- PBO pearl-mica injection-molded poly cone woofer
- non-resonant co-polymer basket
- butyl rubber surround
- sensitivity 92 dB
- frequency response 35-70,000 Hz
- recommended power range 2-45 watts RMS
- peak power handling 180 watts
- top-mount depth 2"
- 2-year warranty
Priced per pair
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- Two 14.5' lengths of speaker wire (each length of speaker wire has quick-slides on one end and bare wire on the other end)
- 2 Self-adhesive grille badges
- 1 Strip of dum-dum
- 6 Self-tapping screws
- 6 Speed clips
- Warranty Card
- Important Safeguards
Thanks for submitting your review
More details on the Kenwood eXcelon KFC-Xr601
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||PBO Pearl-mica poly|
|Woofer Surround||Butyl rubber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||92|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||35 - 70k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||45|
|Peak Power Handling (Watts)||180|
|Top-mount Depth (Inches)||2|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 15/16|
|Mounting Height (Inches)||0.924|
DualMag Woofer Magnet Technology: Kenwood's DualMag woofer magnet technology uses two small but powerful 0.6oz neodymium magnets that improve musical clarity and detail by precisely controlling the cone. The magnets are placed inside the speaker voice coil with their like magnetic poles facing each other. The resulting magnetic repulsion creates a magnetic field that is much stronger and more symmetrical than conventional magnets.
PBO Pearl-mica Injection-molded Polypropylene Cone Woofers: Polypropylene is used for the speaker cones because of its resilience, fast response, and natural resistance to moisture. The pearl mica crystals are uniform, and form an overlapping structure that lends strength and heat resistance to the polypropylene. PBO is a high-performance fiber that has superior tensile strength, thermal stability and very low moisture retention. The results are tighter, clearer sound, reduced distortion, and improved reliability.
Butyl Rubber Surrounds: Butyl rubber has greater internal loss than standard urethane, preventing harmonic distortion at higher frequencies. It more efficiently absorbs edge reflections that can cause audible distortion, resulting in clearer bass performance.
HyperNyl Dome Tweeters: Each speaker features a 1" HyperNyl dome tweeter. HyperNyl is a lightweight polymer, with outstanding high-range response. Unlike conventional coaxial speakers, the tweeter is not mounted on a stalk that protrudes from the center of the woofer. The tweeter is suspended at an angle above the woofer by a two-spoke bridge. Mounting the tweeter at an angle produces better response by providing a more direct path to your ears. In addition, the angle of the tweeter can be adjusted for optimum imaging.
Warranty Note: These speakers come with a 1 year warranty card, but the actual warranty is 2 years.