Contact us
Close contact box

Kenwood Excelon XR-W1002

10" 2-ohm component subwoofer

Item # 113XRW1002

Kenwood puts their most advanced technology into the Excelon subwoofers, so you can enjoy reliable high-performance...

Read more from Crutchfield writer, Bob B.

Ships free

In Stock
$179.99 each

About the Kenwood Excelon XR-W1002

High-performance bass

Kenwood puts their most advanced technology into the Excelon subwoofers, so you can enjoy reliable high-performance bass in your ride. The oversized XR-W1002 10" sub is designed to move more air than a standard sub, which means more sound in your vehicle. It comes equipped with an oversized polypropylene cone attached to a heavy-duty rubber surround that allows for extra excursion, so it'll faithfully reproduce those low notes. The XR-W1002 is rated to handle up to 300 watts RMS so you know it's ready to rock.

High-performance bass

Kenwood puts their most advanced technology into the Excelon subwoofers, so you can enjoy reliable high-performance bass in your ride. The oversized XR-W1002 10" sub is designed to move more air than a standard sub, which means more sound in your vehicle. It comes equipped with an oversized polypropylene cone attached to a heavy-duty rubber surround that allows for extra excursion, so it'll faithfully reproduce those low notes. The XR-W1002 is rated to handle up to 300 watts RMS so you know it's ready to rock.

Keeping it cool

A dual ventilation system forces heated air out of the motor structure through the back and the sides of the housing, so the sub stays cooler during extended play. This ventilation system also allows this sub to operate in a shallow enclosure, good news if you're building a box to go in a tight spot. Install this Kenwood in a suitable box, hook up a nice amp, and you're ready to rumble.

To drive this single subwoofer, we recommend a mono amplifier rated between 225 and 450 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

READ LESS

Product highlights:

  • 10" 2-ohm component subwoofer
  • oversized polypropylene cone with rubber surround
  • handles up to 300 watts RMS (1300 watts peak)
  • frequency response: 31-300 Hz
  • sensitivity: 80 dB
  • top mount depth: 4-13/16"
  • grille not included
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # XR-W1002
KEEP READINGREAD LESS

What's in the box:

  • One 10" Subwoofer
  • Eight 1-3/8" Screws
  • Adhesive backed foam gasket
  • Cardboard template
  • Instruction manual (English/ French/ Spanish/ Portuguese)
  • Warranty information
  • Specs on box lid

Featured video:

Customer reviews

Loading reviews...

Kenwood Excelon XR-W1002 Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Kenwood Excelon XR-W1002

Product Research

Features

Sealed Enclosure Applications: Kenwood recommends sealed enclosure volumes from 0.45 ft³ to 0.75 ft³, with an optimum volume of 0.55 ft³. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music.

Ported Enclosure Applications: Kenwood recommends ported enclosure volumes from 0.7 ft³ to 1.2 ft³. The optimum volume is 0.9 ft³ with a 10-3/4" wide x 1-1/8" tall x 25-1/2" long slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output.

Spring Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 8 gauge.

Additional Measurements:

  • Frame: the speaker frame doesn't have a uniform diameter; at the widest points the diameter is 12.585", at the narrow points it's 10.820"
  • Woofer Displacement: 0.062 ft³ (1.8 liters)

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
perfect for my kenwood set up in my 350z [ nathaniel  Sep 09, 2018 ]

Loading articles...

TOP