About the Kenwood Excelon KFC-XW1221HP
Whatever kind of music you prefer, you need a solid subwoofer to give you the impact you want. Kenwood's Excelon subwoofers are known for rugged construction and tight, punchy sound, and the KFC-XW1221HP 12" sub brings you the boom you're looking for at a surprisingly reasonable price.
Built tough for maximum impact
The KFC-XW1221HP sub features a two-piece polypropylene cone with the rigidity you need to minimize distortion for maximum impact. This 2-ohm sub handles up to 500 watts RMS, so it's a perfect match for the Kenwood Excelon X502-1 mono amp. This speaker works in enclosures as small as 1.25 cubic feet, and you can install it in either sealed or ported boxes. The CA-121G steel-mesh grille (sold separately) protects your sub from accidental damage. When you're looking for the impact you need for all kinds of music, this sub is ready to rock.
- 12" 2-ohm component subwoofer
- 2-piece polypropylene cone with rubber surround
- grille sold separately
- power handling: 500 watts RMS (2000 watts peak)
- frequency response: 25-300 Hz
- mounting depth: 5-11/16"
- sealed box volume: 1.25 cubic feet
- ported box volume: 1.5 cubic feet
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # KFC-XW1221HP
What's in the box:
- One 12" Subwoofer
- Trim ring
- Eight 1-3/8" Screws
- Adhesive backed foam gasket
- Connection guide
- Template on box lid
- Specs printed on the box
Kenwood Excelon KFC-XW1221HP reviews
Thanks for submitting your review
More details on the Kenwood Excelon KFC-XW1221HP
Features & specs
|Cone Material||Polypropylene over Paper|
|Ideal Sealed Box Volume (cubic feet)||1.25|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
81 dB at 1 watt |
|Frequency Response||25 - 300 Hz|
|Max RMS Power Handling||500|
|Peak Power Handling (Watts)||2000|
|Top Mount Depth (inches)||5 7/8|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||10 15/16|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Sealed Enclosure Applications: Kenwood recommends a sealed enclosure volume of 1.25 ft³ (0.8 ft³ to 1.8 ft³ acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music.
Ported Enclosure Applications: Kenwood recommends a ported enclosure volume of 1.5 ft³ (1.2 ft³ to 2 ft³ acceptable) with a 12¾" wide x 1⅜" tall x 29" long slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. However, this efficiency comes at the expense of very low frequency output.
Spring Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge.
Additional Measurements: When mounted without the trim ring, the sub has these measurements:
- Mounting Height: 0.54"
- Flange Height: 0.196"
- Frame Diameter: 12.54"
Warranty Note: Although the information included with these speakers indicates a 1-year warranty, they are actually covered by the Kenwood eXcelon 2-year warranty.
1 question already asked