About the Diamond Audio D310D2.2
Rockin' D3 Series 10" sub
Rockin' D3 Series 10" sub
You hit the highway and crank the stereo, but your factory bass just can't keep up. Diamond Audio designed D3 Series subwoofers for high-performance bass in your car — you'll hear lots of heavy, powerful low notes that make for a very entertaining ride, even if it's just across town.
Heat dissipating woofer
This 10" D3 sub features a light, responsive copolymer cone and large-roll rubber surround for precise cone movement, so you can count on strong, accurate performance. The stamped aluminum dust cap directs heat away from the motor structure, and helps prevent heat from getting trapped in your subwoofer enclosure.
Aluminum voice coils stay cool
Diamond Audio furnishes this sub with hefty 2-1/2" aluminum-coated copper voice coils that dissipate heat for extended power handling. Proprietary Venturi venting in the basket and pole piece funnels warm air away from the sub's interior, and that means the sub stays cooler and happier. The dual 2-ohm voice coils give you more options for wiring the sub into your system, and make it easy to add a second D3 sub later on.
Non-resonant basket resists distortion
The heavy-gauge stamped steel basket gives this sub the strength and stability it needs to rock hard for the lifetime of your system. Diamond Audio forms this basket using a unique stamping technique that virtually eliminates unwanted resonance, so your favorite music sounds just as the artist intended.
Diamond Audio goes the extra step
In most subs, the spider assembly is glued to the basket. In D3 subs, Diamond Audio uses a dual spider assembly that is glued and screwed to the basket to virtually eliminate the possibility of mechanical failure.
- 10" subwoofer with dual 2-ohm voice coils
- textured copolymer cone with nitrile butadine rubber surround
- heavy-gauge stamped steel basket
- power range: 40-400 watts RMS (800 watts peak power)
- frequency response: 28-250 Hz
- sensitivity: 84.9 dB
- top-mount depth: 5-7/8"
- sealed box volume: 0.75 cubic feet
- ported box volume: 1.0 cubic feet
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # D310D2.2
What's in the box:
- 10" Dual 2-ohm voice coil subwoofer
- Rubber trim-ring (installed)
- Installation manual
Diamond Audio D310D2.2 reviews
Thanks for submitting your review
More details on the Diamond Audio D310D2.2
Features & specs
|Impedance||1 ohm or 4 ohms|
|Cone Material||Textured copolymer|
|Ideal Sealed Box Volume (cubic feet)||0.75|
|Ideal Ported Box Volume (cubic feet)||1|
|Port diameter (inches)||3|
|Port length (inches)||11|
|Dual Voice Coil||Yes|
84.9 dB at 1 watt |
|Frequency Response||28 - 250 Hz|
|Max RMS Power Handling||400|
|Peak Power Handling (Watts)||800|
|Top Mount Depth (inches)||5 15/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9 1/8|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual 2Ω Voice Coils: The D310D2.2 features dual 2Ω voice coils. When the voice coils are wired in parallel, the woofer presents a 1Ω load; when wired in series, the woofer presents a 4Ω load.
Cone: The textured copolymer cone has an aluminum dust cap to help draw heat away from the voice coil.
NBR Surround: The woofer features a Nitrile Butadiene Rubber (NBR) surround, a synthetic rubber that stands up to the harsh automotive environment.
Spring-Post Terminals: The spring-post terminals will accept pin connectors, single banana plugs, and bare wire up to 8-gauge.
Concealing Ring: The included rubber trim-ring provides a mounting gasket and gives the subwoofer a finished look.
Sealed Enclosure: The recommended sealed box volume is 0.75 cubic feet.
Vented Enclosure: The recommended vented box volume is 1.0 cubic feet with a 3" diameter, 11" long port; resulting in a tuning frequency of 39 Hz. A 30 Hz sub-sonic filter is recommended for vented enclosures.