About the T-Spec V10-D108K

Add another amp to your system
Add another amp to your system
The T-Spec V10-D108K 8-gauge wiring kit will let you add another amp to your system and really crank up your sound. This water-resistant kit includes everything you need to send power to your new marine amplifier.
Hardware included
With 8-gauge BC-5W2 cable, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10-foot power and ground wires, a 20-foot remote turn-on wire, installation hardware and wire ties to help ensure a neat installation. This kit does not include patch cables or speaker wire, so you'll need to purchase those separately.
Product highlights:
- marine amplifier power wiring kit
- add another amp to your existing marine or powersports system
- package includes power wire, ground wire, turn-on wire, two brass distribution blocks and wire ties
- 10-foot 8-gauge white wire
- 10-foot 8-gauge gray wire
- 20-foot turn-on wire
- 8-gauge BC-5W2 marine-compliant cable
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # V10-D108K
What's in the box:
- 10' 8 gauge OFC Power wire (white)
- 10' 8 gauge OFC Ground wire (grey)
- 10' 18 ga. OFC remote turn-on wire
- 2 Distribution blocks w/snap-on covers (One 4 ga. input
- two 8 ga. outputs each)
- Ten 6" wire-ties
- Four 8 ga. crimp-on spade terminals (non-insulated)
- One 18 ga. crimp-on spade terminal (insulated)
- One 18 ga. crimp-connector
- Four 12 mm Phillips-head screws
- 4 Insulating boots for 8 ga. spade terminals.
Reviews
Customer reviews
Loading reviews...
T-Spec V10-D108K reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the T-Spec V10-D108K

Product Research
Features
Overview: The Metra V10-D108K is an 8 gauge marine wiring kit designed for adding an additional amp to an existing amplified system. It includes two 10' sections of 8 gauge OFC (Oxygen Free Copper) wire for power and ground, 10' of 18 gauge remote turn-on wire, two brass distribution blocks each with a single 4 ga. input and two 8 ga. outputs (each with a 3mm hex-head set-screw), four 8 ga. crimp-on spade terminals with rubber insulating boots, one 18 ga. crimp-on spade terminal, one 18 ga. crimp-connector, and 4 mounting screws for the distribution blocks.
Note: This "Add-A-Amp" wiring kit doesn't include a fuse, fuse holder, patch cables, 3 mm Allen key, or speaker wires. The power and ground wires included are intended to be run from the distribution block to the amp location.
Loading accessories...
Customer Q&A
Loading articles...
Great Product and quality!!
Harold from Carolina, PR