Contact us
Close contact box

Axxess XSVI-1788-NAV Wiring Interface

Connect a new car stereo and retain RAP in select 2007-13 Dodge and Mercedes-Benz Sprinter models

Item # 1201788NAV

Axxess' XSVI-1788-NAV interface ensures that you can keep the non-amplified factory speaker system in your...

Read more from Crutchfield writer, Dave D.

Find what Fits your car

California customers:
Please click here for your Proposition 65 warning.

Ships free

In Stock
$49.99

About the Axxess XSVI-1788-NAV Wiring Interface

Install a new radio in your Sprinter

Axxess' XSVI-1788-NAV interface ensures that you can keep the non-amplified factory speaker system in your Dodge or Mercedes-Benz Sprinter when you replace the factory radio. Connect the wires from this interface to the wires on the new stereo's wiring harness, and your power, ground, and factory speaker connections are covered. If your Sprinter has steering wheel audio controls and your new car stereo can work with a steering wheel adapter, you can plug the Axxess ASWC-1 steering wheel control interface (sold separately) into this adapter's pre-wired harness. That way, you can keep those handy factory controls working with your new radio.

Install a new radio in your Sprinter

Axxess' XSVI-1788-NAV interface ensures that you can keep the non-amplified factory speaker system in your Dodge or Mercedes-Benz Sprinter when you replace the factory radio. Connect the wires from this interface to the wires on the new stereo's wiring harness, and your power, ground, and factory speaker connections are covered. If your Sprinter has steering wheel audio controls and your new car stereo can work with a steering wheel adapter, you can plug the Axxess ASWC-1 steering wheel control interface (sold separately) into this adapter's pre-wired harness. That way, you can keep those handy factory controls working with your new radio.

The XSVI-1788-NAV interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. If you like your radio to keep playing after your vehicle is turned off, this interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened.

Important installation note: This interface will not work with the factory amplified audio system in select Sprinter models. 

Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this model is compatible with your vehicle.

READ LESS

Product highlights:

  • connect a new stereo to your factory wiring plug and retain Retained Accessory Power (RAP)
  • provides connections for parking brake, Vehicle Speed Sensor (V.S.S.), reverse gear, and mute for installing navigation receivers
  • compatible with non-amplified factory systems or when replacing amplified factory system
  • provides 12-volt accessory power connection for new car stereo
  • pre-wired harness for Axxess ASWC-1 steering wheel control interface (sold separately)
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # XSVI-1788-NAV
KEEP READINGREAD LESS

What's in the box:

  • Dodge/Mercedes interface module
  • Wiring harness
  • Installation Instructions

Customer reviews

Loading reviews...

Axxess XSVI-1788-NAV Wiring Interface Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Axxess XSVI-1788-NAV Wiring Interface

Product Research

Features

Vehicle Compatibility: The Axxess Integrate XSVI-1788-NAV interface module is compatible with the following 2007-up Dodge and Mercedes Sprinters (without amplified systems or when replacing the factory amplifier); as of 5/20/2014.

Make Model Year
Dodge Sprinter 2007-2009
Mercedes Sprinter 2010-up

Accessory Output + R.A.P.: In the Doge vehicles listed above, there are no 12-volt accessory wires currently in the factory harness making the installer run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-1788-NAV is designed to provide a 12-volt, 10-amp switched accessory output along with the rest of the wires needed to install an aftermarket radio. The R.A.P. (Retained Accessory Power) function, where power is supplied to the radio after the ignition is shut-of until on of the front doors are opened, is retained by the XSVI-1788-NAV.

Aftermarket Navigation Compatible: The XSVI-1788-NAV also provides essential wires required for aftermarket radios that have navigation. Provided are VSS (Vehicle Speed Sense), Reverse, and Parking Brake, This cuts down the installation time since the installer does not have to look for these wires in the vehicle.

Optional Steering Wheel Control Interface: The included wiring harness features a right-angle 3.5mm connector that lets you keep your Dodge or Mercedes Sprinter's OEM steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).

Color Codes: Wiring up the XSVI-1788-NAV is like wiring up any other wire harness that would attach to an aftermarket radio's harness. The Metra/EIA wire code can be found on the back of the interface's package that will aid you in the wiring of your aftermarket radio The XSVI-1788-NAV interface contains the following wire leads.

Wire Color Function
Red Accessory
Yellow Battery
Black Ground
Orange Illumination
Blue Amp Turn-On
Gray Right Front +
Gray/Black Right Front  -
White Left Front +
White/Black Left Front -
Violet Right Rear +
Violet/Black Right Rear -
Green Left Rear +
Green/Black Left Rear -
Blue/Pink VSS (Vehicle Speed Sense)
Green/Violet Reverse
Bright Green Parking Brake

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
To ease with my install [ Jeremy  Jan 10, 2018 ]

Loading articles...

TOP