About the T-Spec Capacitor
Smooths out the bass
T-Spec's 3-farad capacitor will help your vehicle's charging system keep up with your high-powered sound system. When the power of the bass threatens to overwhelm the electrical system, this cap quickly provides a jolt of stored power to keep the beat pounding and your headlights from dimming. And it recharges quickly, so it's always ready for the next hit.
Displays the voltage
A bright digital meter displays your system's voltage, so you can monitor how things are going and avoid overtaxing your vehicle's charging system. We recommend this 3-farad cap for sub amps delivering up to 3,000 watts RMS. Distribution-type connections on its top simplify the wiring of the capacitor and your amplifier. Warranty: 1 year.
T-Spec Capacitor reviews
Thanks for submitting your review
More details on the T-Spec Capacitor
Overview: This T-Spec v8-series digital capacitor will improve the performance of your car's electrical system by acting as a buffer between the alternator and your amplifier. Stored energy from your car's electrical system is held in the cap and quickly released to the amplifier when needed. High current demand occurs when the music you are playing contains a loud, transient, deep bass signal.
Capacitance: This T-Spec v8-series digital capacitor has a rating of 3.0 farads. While you can never have too much capacitance, it is recommended that you use a capacitor with a minimum of 1 Farad for each 1000 watts of amplifier power.
Distribution Top: The capacitor features an impact-resistant polycarbonate distribution top with two 4 AWG positions on the positive (+) side and two 4 AWG positions on the negative (-) side. You can use 4 AWG or 8 AWG wire when wiring the capacitor into your system. The power/ground wire connections have set-screw terminals that can be tightened/loosened with the supplied 5mm Allen wrench.
Voltage Meter: This capacitor has a digital voltage meter on the top to help you monitor your electrical system's performance.
Reverse Polarity Protection: If the capacitor is wired incorrectly, you can damage your equipment or electrical system. To prevent this, the capacitor has an internal relay system which disables the capacitor and triggers a buzzer to sound.
Resistor Bulb: The capacitor comes with a resistor bulb which is used when initially charging the capacitor, and to discharge the capacitor when removing it from the system. You should keep the resistor bulb in a safe storage location when not in use.
Mounting System: The cap comes with a simple mounting system that lets you mount the unit vertically or horizontally, using the four supplied self-tapping screws.
Q Crutchfield asked: Why did you buy this?
17 questions already asked