Different Harness Connections

I have a 1986 245, and this wiring harness could not attach to the factory wiring harness. Specifically, the factory harness required a clip system that this product did not provide, so I could not secure the connection. Even if this product was compatible with the stock harness, you would have to connect the stereo to the rear speaker wires at the center console, so the ease of using this harness is mitigated.

Have questions for
?

Metra 70-1119 Receiver Wiring Harness

I did not need this part. It was included in the other components but, had I known it was not necessary for my installation, I would have omitted it. I suppose it's one of those situations where you're not certain what you need until you've pulled everything out . Anyway, it's sitting here unused. The part itself is fine.

Have questions for
?

Metra 70-1119 Receiver Wiring Harness

well marked easy hook up

Have questions for
?

Metra 70-1119 Receiver Wiring Harness

One of the wires did not match up with the labeling on the head unit, so it caused a power issue. Otherwise quality ok

Have questions for
?

Metra 70-1119 Receiver Wiring Harness

Just what I needed for the original harness.

Have questions for
?

Good Product

Works as expected, makes wiring easy

Have questions for
?

works as advertised

Just the thing for adding a new radio to my 1988 Volvo 240DL wagon. My previous radio was stolen so I decided to take to opportunity to learn how to install a replacement. All in all, relatively painless. Soldered the connections. Color guide was all correct. And the speakers are working on both sides now (sorry to the thieves, who apparently got a broken unit...)

Have questions for
?

Fits...but didn't need it

It fit the stock adapter but given that most volvo 240's require rewiring one or more speakers I'd say don't bother with this. You won't save much time or hassle.

Have questions for
?

Volvo 240 Receiver Wire Harness

Wiring was a perfect match to the radio and wiring harness. Easy assembly once the connection was found on the lower left of the center console.

Have questions for
?

Epic wiring harness fail!

I ordered a wiring harness for a 240 DL. I told the person that was taking my order that I had 4 speaker system. He assured me that this was the wiring harness I needed and it would fit and only take a 30 min to install! This harness did not fit the rear speakers were not covered in the harness at all. I called back and he assured me that he would send me the right harness. It arrived and was completely wrong basically just blew smoke!

Have questions for
?

Metra 70-1119 Receiver Wiring Harness

The connector and harness was of no use for me on my 88 Volvo 740 wagon. The wire colors did not match with my car's wiring. The connector did not fit properly. I used the old connectors and wires, which consisted of a nine pin and a four pin, after I traced the function of each wire.

Have questions for
?

Volvo Reciever Wire Harness Adapter.

The adapter fit the vehicle and made the reciever installation very easy.If you have the optional (dealer installed) premium stereo w/pre amp,You need to use the wire harness from the pre-amp to connect the rear speakers to the replacement reciever.

Have questions for
?

Defective Cable

I found that the cable that was shipped to me had one contact improperly installed. The strain relief crimp was the only thing retaining the wire. The stripped wire was not captured in the conductive crimp. The right speaker kept dropping out so once I found and soldered this connection, things were fine.

Have questions for
?

No wiring diagram

Received the wiring harness but had no wiring diagram with it. Was told had to buy a Master Guide? Had to guess the pin out. Would have been nice to have a simple pin out guide with the wire harness. Not a happy customer.

Have questions for
?

1988 Volvo 740

Got this with my order from Crutchfield. After pulling the factory amp (which supplies audio to the rear speakers), I discovered that I had to salvage the output-side connector from the amp to the rear channels to make for a modular stereo harness. It seems like this particular component should be included in this kit, as any car that does not have rear channels can simply forgo the second adapter and only use the first. Otherwise, worked fine and installation was a snap. Soldered the various harness leads together and was on my way in no time.

Have questions for
?