About the Metra 72-8110 Speaker Wiring Harness
These harnesses allow you to plug your new speakers into the factory connectors present in your vehicle's speaker openings. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if these adapters are compatible with your vehicle. Sold as pairs. Warranty: 1 year.
Note: Some aftermarket speakers have terminals that are wider than this harness's slide-on connectors. You may need to widen the harness's female slide-on connectors, or use the slide terminals that may be included with the speakers. If you need to connect your new speaker's connectors to the harness, soldering is best, and crimping is also very popular — see "Accessories."
Metra 72-8110 Speaker Wiring Harness reviews
Thanks for submitting your review
More details on the Metra 72-8110 Speaker Wiring Harness
Metra Speaker Harness: Metra speaker harnesses prevent having to splice into your vehicle's factory wiring/speaker plugs when replacing the factory speakers with aftermarket car speakers. The Metra speaker harness features two female quick-slide connectors on one end to attach directly to your new aftermarket speakers and a proprietary Molex connector on the other end that connects to your vehicle's factory speaker plug.
Notes: This 4-pin harness it typically used in a tweeter location, and has two shorting wires so the woofer location connection is maintained.
Quick-Slide Connectors: The Metra speaker harness is equipped with a large (positive) and small (negative) female quick-slide terminal. These quick-slide terminals fit directly onto most aftermarket car stereo speaker terminals (slight crimping may be required). In rare cases that the quick-slide terminals do not fit your car speaker terminals, you will need to solder the Metra speaker harness to your aftermarket speaker's terminals or replace the quick-slide connectors on the Metra speaker harness with the correct size terminal.
Note: No installation tools, hardware, or accessories are included. Please see the Accessories tab for recommendations and availability.
Quick-Slide Terminal Measurements: The positive female quick-slide terminal measures 0.205" (inner width), while the negative female quick-slide terminal measures 0.110" (inner width).
Wire Code Chart: Two identical Metra speaker harnesses are included.
4 questions already asked