About the Axxess XSVI-9006-NAV Interface Harness
Retain your vehicle's factory features with a new radio
Retain your vehicle's factory features with a new radio
You want to install a new car stereo in your Volkswagen, but you don't want to lose the useful features built into your factory radio. The Axxess XSVI-9006-NAV interface harness gives you the ability to connect your new radio to the existing wiring in your vehicle and keep your balance control, fader, and the Retained Accessory Power (RAP) feature. This harness also supplies the outputs you'll need if installing a DVD or navigation receiver.
This harness also includes a prewired harness for the ASWC-1 adapter (sold separately) which makes it much easier to keep your steering wheel controls. This interface is intended for non-amplified systems or when replacing a VW amplified system.
Product highlights:
- lets you replace the factory receiver and keep the balance and fade and Retained Accessory Power (RAP)
- for non-amplified systems or when replacing an amplified system
- plug-in harness for the ASWC-1 adapter
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # XSVI-9006-NAV
What's in the box:
Axxess XSVI-9006-NAV Interface Harness owner's manual
- Radio replacement interface
- Wiring harness
- Installation Instructions
Customer Q&A
Q
Were you able to retain your factory mic, or did you have to use the one that came with the aftermarket radio?
A
Aftermarket mic only. The factory mic is not accessible from the wiring harness
12 reasons to shop with us
Reason #3
Free tech support for the life of your gear
Here in Virginia, 7 days a week.
REVIEWS
Customer reviews
Loading reviews...
Axxess XSVI-9006-NAV Interface Harness reviews
Average review:
Customer photos
Simple design
Kirk from Port St Lucie, FL on 12/29/2018
2016 Volkswagen Jetta
Quick setup. The closure is a bit finicky and took a little patience to line up the harness but once in, good fit. Tons of extra wires so you just need to tuck everything towards the back and down to allow room.
Pros: Quick, worked with my 2016 VW Jetta like a charm!
Cons: Takes patience to line up and secure the locking bar.
1 of 1 found this helpful
RETAINS BACKUP CAMERA ALSO!
Dominic from Canton, GA on 5/11/2018
2016 Volkswagen Passat
I used this harness on a 2016 VW Passat and it worked great. One thing that the description doesn't tell you is that it also has connections to retain the back up camera! One warning...when you connect the vehicle harness to the adapter harness make sure it is completely and totally square/flush before engaging the vehicle harness clip. If you don't the vehicle harness will slip a little and the rear right speaker connections will not mate and you won't get sound out of the rear right speaker.
Pros: Retains all factory connections!
Cons: Mating vehicle harness and adapter harness can be a little tricky
1 of 1 found this helpful
Let's go audio product makers keep up with the times!
Trevor from Carlisle, PA on 12/24/2017
2017 Volkswagen Jetta
I can't give it any score, because I have a 2018 model car that needs a harness that isn't made yet, nor will pro a ly be made in the next 2 years, since the 2017 one seems to not be produced yet either. All the money I just spent on a system going to waste.
Pros: None yet
Cons: Can't use it yet
1 of 3 found this helpful
Axxess XSVI-9006-NAV Interface Harness
David from Denver, CO on 5/19/2017
2017 Volkswagen Jetta
Does what it says, just doesnt retain steering wheel controls with other (sold separately module) per axxess.
Pros: Neat adapter
Cons: No steering wheel controls yet
2 of 3 found this helpful
More details on the Axxess XSVI-9006-NAV Interface Harness
Product Research
Features
Vehicle Compatibility: The Axxess Integrate XSVI-9006-NAV radio replacement interface module allows you to replace the factory radio in select 2015-up Volkswagen vehicles with an aftermarket head unit:
| Make | Model | Year |
| Volkswagen | Beetle | 2016-2019 |
| Golf | 2015-up | |
| Jetta | 2016-2018 | |
| Jetta GLI | 2016-2018 | |
| Passat | 2016-up | |
| Tiguan | 2016-2017 |
Amplified or Non-Amplified System Integration: The XSVI-9006-NAV interface supports non-amplified factor systems. You can also use it it amplified system, if you are planning to bypass the factory amplifier.
Retains Factory Backup Camera: The Axxess Integrate XSVI-9006-NAV radio replacement interface module provides a male composite video jack that plugs into the composite video camera input of your new aftemarket head unit, allowing you to retain your vehicle's factory backup camera.
+12V/10A Accessory Output: There is no 12-volt accessory wire in the factory harness, which requires the installer to run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-9006-NAV is designed to provide a 12-volt, 10-amp switched accessory output (red wire).
Navigation Outputs: The XSVI-9006-NAV provides essential wires required for aftermarket radios that have navigation. VSS (Vehicle Speed Sense), Reverse, and Parking Brake wires are provided. This helps to cut down the installation time, since the installer does not have to look for these wires in the vehicle.
Retained Accessory Power (R.A.P.): The Retained Accessory Power (R.A.P.) function supplies power to the radio after the ignition is shut off until one of the front doors are opened. This function is retained by the XSVI-9006-NAV interface.
OEM Steering Wheel Control Compatible (optional): The XSVI-9006-NAV interface features a right-angle 3.5mm connector that lets you keep your vehicle's OEM steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Optional LCD Module: The AX-LCD (120AXLCD, sold separately) allows you to retain the vehicle personalization menu that is lost when you replace the factory radio in your VW vehicle with an aftermarket stereo. The LCD module consists of a 2.5" (diagonal) screen which offers 256 color adjustments. There are 4 push-button controls to toggle up/down through menu options, return to previous menu, and select current menu option.
Color Codes: Wiring up the XSVI-9006-NAV is like wiring up any other wire harness that would attach to an aftermarket radio's harness. The Metra/EIA wire code can be found on the back of the interface's package that will aid you in the wiring of your aftermarket radio. The XSVI-9006-NAV interface contains the following wire leads.
| Wiring | Color | Function |
| Power/Ground | Red | Accessory |
| Yellow | Battery | |
| Black | Ground | |
| Accessories | Blue/White | Not Used |
| Orange | Illumination | |
| Speakers | ||
| Gray | Right Front + | |
| Gray/Black | Right Front - | |
| White | Left Front + | |
| White/Black | Left Front - | |
| Violet | Right Rear + | |
| Violet/Black | Right Rear - | |
| Green | Left Rear + | |
| Green/Black | Left Rear - | |
| Navigation | Blue/Pink | VSS (Vehicle Speed Sense) |
| Green/Violet | Reverse | |
| Light Green | Parking Brake |
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
1 question already asked
Loading articles...